Used Agm Agm Haspel Met Pomp for sale (3,665)

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW Lhjdpsfv Axmefx Abyjn weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere Ljdefv Aykepfx Abyshn connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table diameter 1300 mm table load 3000 Kg Lhodpfx Abjfv Ayysysn swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 780 mm table load 1,0 t swivelling range 0 - 135 Grad Lhsdpfxsfv Ay Sj Abysn turning speeds 0,15 - 1,5 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1000 Nm welding current 500 Ampere including remote control and welding current transmission.

Condition: new, table diameter 1600 mm Ledpfsfv Azhex Abyohn table load 8 t swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm welding current 700 Ampere including remote control and welding current transmission.

Condition: new, weight max. 10 t workpiece diameter 320 - 3200 mm drum diameter 300 x 120 mm Lhodpfsfv A Dcox Abyen feed 100 - 1000 mm/min total power requirement 1,1 kW

Condition: new, weight max. 20 t workpiece diameter 500 - 3800 mm drum diameter 350 x 150 mm feed 100 - 1000 mm/min Lhedpfofv A Dgex Abyen total power requirement 1,5 kW weight of the machine ca. ca. 1,8 t Dimensions (LxWxH) 2,2 x 2,7 x 0,9 m

Condition: new, weight max. 5 t workpiece diameter 250 - 2500 mm drum diameter 250 x 100 mm Ljdpfx Abefv A D Dsyjhn feed 100 - 1000 mm/min total power requirement 0,75 kW

Condition: new, weight max. 10 t Lhodpfx Abefv A D Ieyjn workpiece diameter 320 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 1,1 kW

Condition: new, weight max. 40 t workpiece diameter 600 - 4500 mm drum diameter 400 x 160 mm Lsdpfx Absfv A Eaoyehn feed 100 - 1000 mm/min total power requirement 3 kW

Condition: new, thread dia. M5 - M16 mm 250 U/min. 48 Nm air pressure 6 - 8 bar working area 150 - 1900 mm The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: Lsdpfx Abofg U Sieyjhn - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base.

Condition: new, thread dia. M6 - M22 mm Lhjdpfxjfg U Ske Abyon 60/200 U/min. 105 Nm air pressure 6 - 8 bar working area 400 - 2000 mm

Condition: new, thread dia. M10 - M33 mm Ledpefg U Sljfx Abyshn 35/115 U/min. 320 Nm air pressure 6 - 8 bar working area 400 - 2000 mm

Condition: new, weight max. 20 t workpiece diameter 150 - 3800 mm drum diameter 350 x 150 mm Ledpfxef Ep Dme Abyjhn feed 100 - 1000 mm/min total power requirement 2 x 1,1 kW

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Meta (Thyssen) The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 140 x 50 mm Beam type: HN 140|15 Bracket: 4 HK (hooks) clear width: 2,700 mm Max. load per pair of beams 4,000 kg, with evenly distributed load Lhodpeuny A Sefx Abyon 02x safety pins, used Version: completely galvanized For securing the longitudinal beams Against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, sheet width 1050 mm plate thickness 1,5 mm distance between columns -- mm weight of the machine ca. 280 kg dimensions of the machine ca. 1300 x 750 x 1515 mm Manual folding machine FSBM 1020-20 HSG / 3770103 - The workpiece is clamped using a foot pedal, so both hands remain free for material feed - Different tool variants available E, S2, HS2 and HSG - The strong auxiliary cylinder makes bending easier - Wide clearance between the upper and lower beam of up to 25 mm Lhedpeudc Izofx Abyen - Self-lubricating slide bearings - Clamping pressure of the upper beam can be easily adjusted using handy knurled screws - Adjustment of the material thickness by means of a knurled screw - Adjustable stop for bending angle Equipment details: FSBM 1020-20 HSG - With segmented goat foot tools, segmented bending bar and segmented bed pad - Segments have a hardness of HRC24-26 VA steel 1.2 mm Aluminum 2.4 mm

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Lhedsuddcgspfx Abyjn Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Lodsukkvnjpfx Abyshn

Condition: good (used), Metos Proveno CoolPro 80E combi kettle Lsdpfx Abjt T Egasyehn Stainless, 80L, combi kettle, jacketed, 20.75Kw, temp range from 0'C to 120'C, with variable speed agitation, adjustable timer and temperature settings and more, with manual, 3Ph

Condition: excellent (used), BLB GmbH, supplier of new and used warehouse technology. You can obtain shelving systems, industrial trucks, accessories and other warehouse inventory from us. In this ad you buy as follows: Used pallet racking / Manufacturer Meta Plug-in system with pre-assembled frame, very quick assembly Positioning : 10 x rack bays with 4 x pairs of beams per bay Bay width 2700mm / beams 120 x 50mm / color black Quantity scaffolding 11 pieces Frame height approx. 7,500mm / depth 1100mm / painted black / pre-assembled 80 pcs. cross beams 120 x 50mm, painted black, incl. safety pins The display is available 2 x ! MORE - SMALL QUANTITIES POSSIBLE ! PLEASE ASK FOR YOUR DESIRED QUANTITIES Further accessories available for an extra charge ground anchor Lodpep I E Taofx Abyshn Impact protection Crash barrier Wire mesh Net price: 2950€. ex warehouse Weißenhorn, invoice with VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please ask for your transport costs.sale of used goods without guarantee & warranty. Errors / prior sale of used goods expressly reserved.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 734, Drill diameter: 35/40 mm Spindle mounting: MK 3 Spindle speeds in 2 ranges and continuously adjustable: 160 - 2250 rpm Drilling stroke: 140 mm Overhang: 293 mm Drive motor: 380 V, 1.5/1.9 kW Weight: 250 kg Lhedpfx Aboz Divqsysn Space requirement: 900 x 550 x 1830 mm

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth Lodpfxez I Ub Hs Abyohn adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 38,800 kg, Year of construction: 2023, operating hours: 1,707 h, Conveyor belts: hydraulically foldable Engine type / engine power: C4.4 Tier 4 Final / 102 kW Ledpfxezxq N Ro Abyjhn Transport weight: approx. 38,800 kg Engine manufacturer: Caterpillar Transport dimensions: 18,500 x 3,200 x 3,400 mm (L x W x H) Volume of feed hopper: 10 m³ Grizzly screen: hydraulically foldable with remote control Screen area, lower deck: 5,490 x 1,524 mm Screen area, upper and middle decks: 6,100 x 1,524 mm Screening plant type: classifying screen with three screen decks Throughput: up to 600 t/h (application-dependent)

Condition: ready for operation (used), Alzmetall AB 45 S Pillar Drill Machine, Drilling Machine Speed: 25-640 rpm Overhang: 350 mm Quill stroke: 180 mm Drilling capacity in steel: 45 mm Dimensions: approx. 1200 mm x 800 mm x 2300 mm (W x D x H) Weight: 950 kg You are welcome to come by for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Ledezyp Axjpfx Abyehn Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 5122, Offer 26250 Technical data: Drilling capacity in steel ST 60: 32 mm Drilling capacity in steel ST 60: 40 mm Long spindle, MK 3 Drilling spindle speeds, continuously variable: 160 - 2250 rpm Drilling spindle stroke: 120 mm Overhang: 293 mm Column diameter: 115 mm Machined base plate with T-slots: 400 x 400 mm Max. distance from base plate to spindle: 600 mm Emergency stop button Space requirement: approx. W 450 x H 1250 x D 900 mm Lhodpfx Abjz I Sd Soyon Weight: approx. 250 kg Quick-change drill chuck Table stand