Used Weinig Weinig Cross Clamp 45X45 for sale (13,538)

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder Itodpencc Igsfx Akpen only machine machine is dismantled, immediately available Transport can be organized

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. Itsdpfx Akeq Dzi Tepjn New Proscale.

Condition: good (used), Panel lifting clamp, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper -Sheet metal claw -Wingspan: up to 152 mm Itodpodi Smlofx Akpen -Load capacity: 2500 kg -Number: 1x terminal available -Price: per piece -Weight: 29 kg/piece

Condition: reconditioned (used), functionality: fully functional, 430 mm chain width 120 mm Cutting height Itedpjt Aad Sjfx Akpon 55 KW saw motor infinitely variable feed speed Machine workshop checked Machine cleaned and repainted

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Ijdeulnr Aopfx Akpjtn Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table

Condition: excellent (used), Year of construction: 2005, Weinig Dimter OptiCut S 90 optimizer with 2 ejectors – after technical review – German production – year of manufacture 2005 Itsdpfx Aei Apgmskpjn TECHNICAL PARAMETERS: max. length of cut material 4500 mm max. width 360mm max. height 160mm automatic length measurement optimization in 4 quality classes total power 13 kW blade motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m component marking printer cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600 / 240 / 190 cm weight ~ 1800 kg

Year of construction: 2010, condition: good (used), Weinig GRECON TURBO S finger jointing line Itodpfx Aein Uulskpen - German production - DTR, CE - year of manufacture 2010 - high efficiency up to 200 elements / min - 28 km / 8h TECHNICAL PARAMETERS: Wood parameters - width 60 - 225 mm - thickness 18 - 48 mm - length 300 - 2000 mm - pressing length 8100 - 16400 mm - power consumption 150 kW - air consumption 3100 Nl/min - suction capacity 14845 m3/h - two milling stations - undercutters - connecting with a dash and a zigzag - loading with a conveyor with spacers - package width 600 mm - divided ironing length Folded machine dimensions - length 42000 mm - width 6000mm - height 2100 mm

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm Itedjir Eubjpfx Akpon - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) KOCH T-100-B belt conveyor (250x4550) 3) Weinig Uniplan milling machine 4) KOCH T-100-B belt conveyor (250x7050) 5) KOCH SF-3 tenoning machine 5a) Lower belt conveyor for waste (at the tenoning machine, 300x6050) Itedpfx Aohm Exdskpon 5b) Side belt conveyor for waste (at the tenoning machine, 300x1800) 6) KOCH T-100-B belt conveyor (250x5020) 7) KOCH T-100-A belt conveyor (300x3050) 8) KOCH T-100-B belt conveyor (300x3500) 9) KOCH T-100-B belt conveyor (300x4530) 10) Weinig U2G milling machine 11) KOCH belt conveyor (250x4050) The line has been used for very few hours and is in like-new condition. The production year of the machines that make up the line is 1995. In addition, I am including a complete set of Leitz milling cutters for each machine, suitable for a Euro 68 profile window. The cost of a new line is currently over 1 million euros.

Year of construction: 1971, condition: used, Shaft Arrangement 1. Lower shaft – 4 kW, 2850 rpm 2. Right side shaft – 3 kW, 2850 rpm 3. Left side shaft – 3 kW, 2850 rpm 4. Right side shaft – 3 kW, 2850 rpm 5. Upper shaft – 5.5 kW, 2850 rpm 6. Lower shaft – 4 kW, 2850 rpm Ijdpfx Aksigqzrspotn Dimensions: 4900 mm x 1300 mm x H 1500 mm Weight: approx. 5500 kg

Condition: excellent (used), Year of construction: 1981, 4-SIDE PLANER MOULDING MACHINE WEINIG UNIMAT 17 A With 5 spindles Technical specifications: Working width: max 180 mm Iedpfx Ajgqrunekpstn Working height: 120mm Spindle speed: 6000 rpm Diameter of the spindle: 40 mm Smallest tool diameter: 100mm Max. tool diameter: 160mm Max. diameter of the vertical spindles : 180mm Max. tool diameter of the 2nd right spindle: 195mm Max. tool diameter of the upper spindle: 200mm Max. tool diameter of the lower spindle: 180mm Feed speed variable: 7 - 18 m / min Throughfeed with springs pressure Trasmissione a catena ( non cardanica) Spindle arrangement: 1. spindle bottom hotizontal(planer), KW 4 2nd spindle vertical right KW 3 3rd spindle vertical left- KW 4 4th spindle upper horizontal KW 5,5 5th spindle bottom horizontal KW 4 1 set of Planing tools are included Volt 380/50 hz SECOND-HAND MACHINE IN GOOD CONDITIONS, TESTED IN OUR WORKSHOP BEFORE DELIVERY

Condition: excellent (used), Year of construction: 2004, Weinig Dimter Opticut 200 Classic optimizer - after the technical review - year of production 2004 - declaration of conformity, DTR - German production Itodegz Tbdspfx Akpsn TECHNICAL PARAMETERS: min./max. entry length of the element 800/3500 mm min./max. entry width of the element 80/200 mm min./max. element input thickness 12/80 mm type of wood hard / soft dash cutting wood classification max. feed speed 120 m / min acceleration 5 m / s saw blade diameter fi 500 mm saw hole diameter 30 mm saw spindle speed 4600 U / min duration of 1 cycle 0.7 - 1.2 sec a powered conveyor at the entrance and a marking station with side tables for two markers conveyor belt total power 15 kW length measurement - fluorescence camera for 3 qualities receiving station - conveyor belt full optimization total length 8300 mm stub diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 Ijdsrhig Eepfx Akpotn - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: good (used), Year of construction: 1993, functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 7,500 W, height adjustment type: electric, planer shaft diameter: 50 mm, number of spindles: 8, input frequency: 50 Hz, Equipment: cabin, motor brake, 8 spindles, Working width: 230 mm, Iodpfx Aker Axwnjpotn working height: 180 mm, spindle diameter: 50 mm, feed rate: 7.5 kW / 6 - 36 m/min, Spindle arrangement: 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-Right (11 kW) 4-Left ( 11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table

Condition: used, Load capacity: 3 t Itjdpob Nwkxefx Akpen Opening width: 38 mm Weight: 15 kg

Condition: excellent (used), Weinig LTB250/3500G belt lifter Length 3500mm Width 250mm Itedpfx Aeu Eclrskpsn Speed 22m/min

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES Itedpfx Akoz N Szhjpon 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: excellent (used), Year of construction: 2005, We offer a Weinig Super 4 planer in very good condition with EM 15 feed unit, year of manufacture 2005. Manufacturer: Weinig Model: Super 4 Year of manufacture: 2005 Condition: very good Type: planer Itodpfxeylagme Akpsn If you have any questions or need further information, please send us a message or contact us by phone.

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Ijdpeu Damdsfx Akpotn

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Itedjqu Sc Hopfx Akpon Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Year of construction: 2008, condition: like new (used), Four-side planer Weinig Powermat 500 Isdpfx Aoltla Sjkpetn - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder TECHNICAL PARAMETERS: planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW five upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242 cm weight 3000 kg

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm Itsdpfxjncc Ics Akpen crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized

Condition: good (used), Year of construction: 2008, Raimann FlexiRip 4200 rip saw - German production, user manual - year of production 2008 - automatic material collection TECHNICAL PARAMETERS: Itsdpfshzg Agsx Akpsn cutting length max. 4200 mm cutting width max. 600 mm cutting height max. 130 mm feed continuously adjustable up to 80 m / min main engine power 11 kW disc diameter max. / min. 600 mm / 400 mm 100 dimensions can be programmed line laser two-stage blade feed touch panel control stub diameter 2 x 160 mm dimensions of the machine (length / width / height) 620/160/220 cm weight 2250 kg

Condition: excellent (used), Low-voltage jaw (28144) Low-voltage clamping jaw Manufacturer: AMF Type: 6494-19 Itodpfx Aksg Er Igspen Groove width for screws up to 19 mm Thickness h1 = 25 mm Overall length 150 mm Overall width 50 mm Overall height 60 mm 3 pairs available Weight per pair: 3 kg Original price per pair: 271 Euros

Condition: good (used), Year of construction: 2002, Weinig Unimat 23 EL four side planer - machine in stock - German production - year of production 2002 - DTR TECHNICAL SPECIFICATIONS: Iodpfx Akshhyr Ajpotn - planing width 230 mm - planing height 170 mm - feed adjustable on the inverter 6-26 m / min - spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW 6 upper spindle 7.5 kW - 4 kW feed motor power - feed on cardan shafts - pneumatic pressure - five top steel rollers - four upper rubber rollers - electric height adjustment - diameter of the stub pipe 140 mm - central lubrication - length of the top 1980 mm Machine dimensions: - length 520 cm - width 210 cm - height 210 cm - weight 4000 kg