Used Mazak Nexus Hcn 6000 for sale (2,504)

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency-controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate -Belt width: 600 mm Kedpfoihi Ubsx Akpedu -Conveyor length: approx. 6000 mm -Installation dimensions: 6010/950/H340 mm -Transport dimensions: 4140/950/H430 mm Total weight: 300 kg

Condition: ready for operation (used), Mitsubishi / Mazak FX 06E BN624A496G53 circuit board, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Kdedpfx Aji Eb Epekpju

Year of construction: 2025, condition: new, Transport trailer Payload: 6000 kg Length: 4000 mm Width: 1600 mm Height: 540 mm Ksdehwna Aepfx Akpodu Turntable steering Fixed trailing axle Wooden floor: 27 mm Reinforced band tires 415 x 100 with steel rims Paint finish: RAL 2000 Drawbar with 40 mm eye and safety lock

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Kdsdpfjhw Ng Ijx Akpsu Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: new, Roller conveyor length 6000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 160 kg length in width 620 mm length in total 6000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. Kdodpfx Aof Nb Eiokpou

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg Kodpfogbt Sqjx Akpedu surface plate measures: 1500 x 1500 mm dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg

Condition: new, Year of construction: 2024, load capacity: 6,000 kg, Equipment: foot remote control, Welding rotary table, container rotating device, 6000 kg load capacity with hand and foot remote control Diameter from 160 mm to 4000 mm Drive roller diameter 300 mm Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable, 50 - 2000 mm/min. Motor AC 380 V Kjdpfxjgfql Aj Akpsdu

Condition: new, Year of construction: 2024, functionality: fully functional, The SLV and SLH hydraulic presses are designed for the thick-layer gluing of wood (window profiles, glued beams, etc.), with natural drying of the glued joints. Kdjdpegf A S Nsfx Akpju The work surface is equipped with hydraulic compression units and hydraulic trolleys for aligning the elements. Adjustment is possible for each segment individually or collectively. Each cylinder can be closed independently. The surfaces that come into contact with the adhesive are protected with stainless steel tape. The press is designed in such a way that the segments can be upgraded later to the desired working length.

Condition: good (used), Textile screen printing flash dryer Kdsdpfsvnrkfex Akpsu Acosgraf Texflash SE 6000 6000W 400V 3 phases 6 x 1000W independent lamps for auto or manual machines automatic use with sensor very clean We ship everywhere in Europe (shipping cost to be added)

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A Ksdpfxjvwgl Aj Akpsdu - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

Year of construction: 2025, condition: new, Dimensions (L/W/H) 8015x1635x2125 mm Weight 2400 kg Kjdpfxsvz E Nbo Akpodu Total power requirement 13,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 0 kw Kdodpfx Aovz Eq Sokpeu

Year of construction: 2002, condition: excellent (used), 4 shaft shredder for shredding of thick-walled pipes. Feed via feed shaft Keded Rby Depfx Akpodu (not included in delivery, alternatively producible) Manufacturer Vecoplan Drive: Shaft 1: 37 kW Shaft 2-4: 30 kW (each)

Year of construction: 2003, condition: excellent (used), Working travels 6000x1000x1200mm Kdsdpfjd Rz Uvjx Akpeu B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Coolant through spindle Tool measuring device Zero point clamping system 3R MARCELS MASCHINEN CH

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 6000 rpm -Power: 1 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Number: 1 piece of motors available -Price: per piece Ksdjdqckyjpfx Akpjdu -Dimensions: 500/165/H210 mm -Weight: 18 kg

Condition: excellent (used), functionality: fully functional, For sale: this lathe, currently connected and available for testing. Accessories for the machine included. A video of the machine can be sent via WhatsApp upon request. Kdodpev Nw A Njfx Akpsu Swing over bed: 1050 mm Distance between centers: 6000 mm Swing over carriage: 840 mm

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Kdjdpowctn Hefx Akpsu Ask for additional information!

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-426 Kdjdpougbrqsfx Akpeu Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5300 mmVertical traverse Y: 1050 mmTransversal traverse Z: 1500 mmVertical capacity (VC): 80 - 1130 Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X,Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: UndeterminedMachine weight approximate: 43000 kgMachine dimensions approximate: 11560 x 6150 x 3538 mm Accessories Guarding: 2 front sliding doorsAutomatic tool changer: ATC40Chip conveyor: 2 longitudinals hinge typeElectronic handwheel: HR-410Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: good (used), Servo motor, electric motor, DC motor Kjdob Dk D Sepfx Akpedu -Max. speed: 6000/49 rpm -Power: 0.52 kW -Motor torque: 1.15 Nm -Shaft: Ø 25 mm -Design: B5 -Transmission manufacturer: SEW Eurodrive -Type: RF27 AQH80/2 -Translation: 1:28,37 -Dimensions: 410/140/H140 mm -Weight: 8 kg

Condition: good (used), Year of construction: 2005, OMGA opti cut IDC000080 - Manufacturer: OMGA Kedpfxst D Duks Akpsdu - Year of production: 2005 - including table before and after - Control cabinet - Working condition

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Kdodpfszc Izgox Akpou Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2020, condition: used, This listing is for Agilent MagnisDx NGS Prep System The unit is in full working condition and ready for immediate use The Agilent MagnisDx is an automated benchtop system for NGS library preparation and target enrichment. It supports automated workflows using Agilent SureSelect chemistry, with barcode checking, pre-set protocols and integrated workflow automation for reproducible results Transparency Report and Technical Audit: Software and Media Disclosure: Kedpfx Ajzw Dv Ijkpedu As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test Kjdpfxjz D S Ezj Akpsdu AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Condition: ready for operation (used), Yamazaki / Mazak MV4- Servo Drive 200W, used, normal signs of use, 100% functional, scope of delivery as per photos Kdjdpfx Ajz Adn Uskpou

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 20,000 m/min, table load: 1,000 kg, with multi-angle head for efficient and productive 5-sided machining of long parts, such as beams, profiles, tubes, etc. • Max. travel distances: X-axis: 6000 mm working range Y-axis: 800 mm working range Z-axis: 600 mm • Max. load capacity: 1500 kg • Main spindle drive power: 11 kW asynchronous motor • Main spindle speed: 8000 rpm • Tool holder: SK 40 • Rapid traverse rate X-axis: approx. 30000 mm/min • Rapid traverse rate Y-axis: approx. 20000 mm/min • Drilling capacity: ø 36 mm in S355 • Thread cutting: M20 in S355 • Servomotors for separate drive of the Y and Z axes with ball screw; X-axis with helical and hardened rack and pinion drive Kdedpfx Akoznlkzopju • Limit and reference switches in non-contact design • Spindle overload protection • Robust, precise cross table, generously sized • Safety device combined with light curtain and/or safety fence • Tool diameter: max. 100 mm • Tool length: max. 270 mm • Approximate footprint (L x W x H): 9050 x 3600 x 3150 mm • Total weight: approx. 8 tons • Customer-side connections: Connection power: 30 kW / 63 A • Compressed air: 6 – 8 bar • Control system: Heidenhain TNC7 Basic • Main computer: MC 355 with 19" FullHD multi-touch screen • Mobile machine control panel with keyboard TE 350 - Tool changer, 24-position - Minimum quantity lubrication and/or coolant system - Chip conveyor including discharge chute Heidenhain options, such as: - Heidenhain electronic handwheel - Heidenhain 3D probing system for workpiece measurement - Heidenhain CAD import software option - Heidenhain tool length measuring system - 6 pcs. Mechanical-hydraulic vises MSH 150, clamping width 300 mm - Pendulum operation duo (divided working area) - Multi-angle head (moving, automatically interchangeable, controlled rotary axis 360°, lockable every 15°, automatic tool changer, 10-position, angle head length approx. 215 mm, usable length approx. 160 mm, machine-side mounting: SK 40 with 4-point clamping system, hydraulic, tool-side design: BENZ HSK 50 or comparable, translation 1:1, max. speed 3000 rpm, cycle operation, max. torque: 100 Nm, lubrication: grease/continuous, weight approx. 50 kg, minimum quantity lubrication with 1-2 nozzles.