Used Marunaka + Masina Ascutit Sl-25T for sale (2,825)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Iedpfx Adszdupljqjtk 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX TURRET 12 STATIONS, DRIVEN TURRET RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS HYDRAULIC STEADY Ijdjymmqbjpfx Adqstk FULL SET OF MANUALS MIST COLLECTOR VERY GOOD RANGE OF TOOLING NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Chip Conveyor Coolant System Machine Data Itjdpfx Ajx Hp Hgsdqok Machine Weight: approx. 5,000 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

Condition: ready for operation (used), EXCELLO DLZ 500 LZ - 3 Meter Turning Length / Lead and Feed Screw Lathe - Centre height: 250 mm - Centre distance: 3000 mm - Swing diameter over bed: 500 mm - Swing diameter over cross-slide: 310 mm - Spindle bore: 65 mm - Spindle speeds: 28 - 1400 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric etc. Isdpjyntkqjfx Adqjtk - 3-jaw chuck 250 mm - 4-jaw chuck 250 mm - Multifix toolholder with inserts - Steady rest - Tool cabinet - Documentation Dimensions (LxWxH): 5.5x1.4x1.6 meters / Weight: 3800 kg Subject to errors and input mistakes

Condition: used, Year of construction: 2003, turning diameter 430 mm turning length 519-525 mm control Mori seiki MSX-805 Itsdpfsy Sblxox Adqjk x-axis 230 mm z-axis 520 mm weight of the machine ca. 4100 kg

Condition: used, Year of construction: 2013, operating hours: 18,995 h, functionality: fully functional, machine/vehicle number: VH-20053, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: mittig, spindle speed (max.): 3,500 rpm, spindle speed (min.): 50 rpm, table width: 1,050 mm, table load: 5,000 kg, table length: 2,100 mm, table height: 860 mm, total height: 3,500 mm, total width: 4,485 mm, total length: 5,550 mm, type of input current: AC, workpiece weight (max.): 5,000 kg, overall weight: 11,000 kg, control cabinet width: 600 mm, power: 25 kW (33.99 HP), control cabinet length: 1,275 mm, control cabinet height: 2,370 mm, Equipment: rotational speed infinitely variable, For sale is an MTE BF-2000 CNC bed-type milling machine, year of manufacture 2013, in very good condition with comparatively low hours of use. The machine is ideal for precise and heavy machining operations in mechanical and tool engineering. Thanks to its rigid bed construction and powerful spindle, large and heavy workpieces can also be machined reliably. The machine is well maintained, fully functional, and can be inspected by appointment. Further technical data and accessories are available on request. Control: Siemens 840D SL Spindle taper: SK50 (DIN69871) The quoted price is exclusive of dismantling, packaging, and shipping. Sale ex works; subject to prior sale. Machines are sold in used condition; any guarantee and warranty are excluded. Itodpfxjytqdrs Adqsk

Year of construction: 2018, condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Manufacturer: Jiangsu, heat exchanger type SL-421 Itsdpfxjxl R Rns Adqok -Pump: Aulank CPS-20 1.5 kW -Flow rate: 180 l/min -Container: Material stainless steel, with level indicator -Transport dimensions: 1180/780/H760 mm -Weight: 80 kg

Condition: used, maximum load weight: 30,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2017, next inspection (TÜV): 01/2027, Equipment: ABS, * Schmitz 3-axle aluminum tipper approx. 26 m³ * SKL 24 SL 7.2 * Lifting axle * Disc brakes * Air suspension * Ride height control Iodpfx Aey Arpcodqetk * Platform * Okuslide * Sliding tarpaulin * Schmitz axles * MOT 01/27-SP 07/26 * Unladen weight 5030 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Isdpfjzvd Unsx Adqetk Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: used, Year of construction: 2001, functionality: fully functional, CENTAURO SL 3000 longitudinal cutting saw Cutting length: 3400 mm Iedpfx Aszmf Idsdqotk Cutting width (max.): 600 mm Cutting height (max.): 160 mm Saw blade diameter: 550 mm Main motor power: 11 kW Feed rate: up to 80 m/min Machine dimensions: 5285 x 1532 x 2150 cm (H) Weight: 1500 kg Year of manufacture: 2001

Condition: excellent (used), XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Itodpozuxnasfx Adqek Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Itjdpezu S U Hefx Adqjk Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, spindle speed (max.): 20,000 rpm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 480 mm, controller model: SIEMENS 840D SL, TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 520 mm Travel Z-axis: 480 mm Rapid traverse X: 40 m/min Rapid traverse Y: 40 m/min Rapid traverse Z: 30 m/min Isdpfsxrctnox Adqjtk Tool holder: HSK 63A Max. spindle speed: 20,000 rpm MACHINE DETAILS Control model: SIEMENS 840D SL Dimensions & Weight Passage size: 2.40 x 2.80 m Net weight: 8,500 kg EQUIPMENT Chip conveyor Swivel head Digital linear scales (0.0001 mm) CTS spindle cooling Chip extraction system

Condition: used, empty load weight: 7,950 kg, maximum load weight: 11,050 kg, overall weight: 19,000 kg, axle configuration: 1 axle, first registration: 03/2002, loading space length: 10,500 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, total length: 10,750 mm, total width: 2,600 mm, total height: 3,850 mm, suspension: air, tire size: 295 / 80 R 22,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, tail-lift, Vehicle location: Bovenden, 1 axle, BPW axles, air suspension, last axle forced steering, lifting and lowering, ABS (anti-lock braking system), portal doors, lashing rails, side aluminum fender, twin tires, aluminum loading platform, diesel/electric refrigeration unit. Iedpfx Asi Rngvjdqjtk Body: Thermo King SL 200e, city semi-trailer, Chereau body, year of manufacture 2004, disc brakes, partition, lashing rails in the outer walls, loading platform: Dautel 2000 kg lifting capacity, year of manufacture 2014, diesel operating hours: 22,916 hours, electric operating hours: 1,596 hours. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: excellent (used), Year of construction: 2016, For sale: three professional wrapping robots for flexible and efficient pallet wrapping. Available from stock: a Cyklop CSM Robot PRS from 2016, a Cyklop GL robot from 2013, and a Robopac S6 from 2017. All machines are suitable for various pallet sizes and ideal for companies that require flexibility and reliability in their logistics process. Cyklop CSM Robot PRS This mobile wrapping robot from 2016 is equipped with a new battery from 10-2024 and operates completely independently around the pallet. Key features: - Mobile wrapping robot suitable for all pallet sizes - Powered pre-stretch system for efficient film saving - Automatic height detection - Adjustable wrapping programs - Ready for immediate use thanks to the new battery - €3950 Cyklop GL robot A compact and reliable wrapping robot that is very suitable for variable pallet dimensions and irregular loads. Key features: - Flexible application for various pallet types - Simple operation - Suitable for intensive daily use - Suitable for nets - New batteries - €3450 Robopac S6 A modern and powerful wrapping robot with extensive setting options. Key features: - Advanced wrapping programs - Suitable for high wrapping heights and variable loads - Reliable and stable operation - Equipped with a film cutter, which cuts the film at the end of the wrapping cycle - €3950 Condition of the machines All three machines are in good condition, fully functional, and ready for immediate use. Videos of the machines can be sent via WhatsApp. We also supply wrapping film. For more information, please feel free to contact us. Trade-in of a (defective) pallet wrapper is possible. See also my other advertisements. Film wrapper, pallet wrapper, wrap machine, wrapping machine, pallet wrapping machine, wrapper, robot wrapper, wrapping robot, robot wrapper, wrapper, film, wrapper. Itodpfx Adozbyc Tsqsk

Condition: used, maximum load weight: 29,539 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2026, Equipment: ABS, Schmitz Cargobull SKI SCB?S3D SL 8.2 Steel Round Body 31.9 m³ * Rear tailgate (overlapping) * Air suspension * Pneumatic controls * Disc brakes * Lifting axle on the 1st axle * Automatic lowering during tipping * Load pressure gauge * Hubodometer * Sliding tarp * Foldable underrun protection * LED lighting system * LED auxiliary headlights * SCB axles * 15-pin ABS connection * 15-pin power connection * 2 x 7-pin power connections * ISO air couplings with red and yellow coupling heads Itsdpfx Adey Nhdvsqjk Interim sale and errors expressly reserved! Sale exclusively in accordance with our General Terms and Conditions. Important notice – Important information: Despite careful inspection of all details in our offer, errors may occur. Some may be caused by transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal entitlement. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it is information for initiating a contract. The details provided are without guarantee and therefore do not constitute warranted characteristics.

Condition: ready for operation (used), Year of construction: 2015, An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible. Itjdpfx Aswnr I Nodqjk

Condition: used, Year of construction: 1988, turning diameter ca. 570 mm turning length ca. 530-610 mm control FANUC ohne Gewähr x-travel ca 160-200 mm y-travel ca. 560 mm weight of the machine ca. 4,5 - 5 t Isdpfeyiu Tpex Adqstk ca 10 oder 12 spindle bore 52-76 mm weight of the machine ca. 4 t

Year of construction: 2008, condition: like new (used), MULLER mobile lifting column/jib with 1/2 rotation of the tank Load capacity 150 Need to be connected to lift Total weight 490kg Sold with 5 tanks: * 1 tank of 100 liters Ijdpev Dtihsfx Adqstk * 2 tanks of 200 liters * 1 tank of 150 liters * 1 tank / hopper, with valve for powder, of 90 liters

Condition: good (used), functionality: fully functional, empty load weight: 6,945 kg, maximum load weight: 28,000 kg, overall weight: 34,945 kg, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 01/2003, next inspection (TÜV): 12/2026, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, loading space volume: 20 m³, total length: 8,000 mm, total width: 25,000 mm, total height: 3,600 mm, suspension: air, tire size: 385/65R22-5, tire condition: 100 %, wheelbase: 1,350 mm, maximum speed: 70 km/h, color: green, trailer brake: trailer unbraked, Year of construction: 2000, operating hours: 2,000 h, Equipment: tail-lift, 2 IDENTICAL UNITS FOR SALE, CARNHEL BRAND DUMP TRAILERS, FOR CONSTRUCTION WORK. NEW SUSPENSION, GENERAL INSPECTION OF INSTALLATION FOR TECHNICAL INSPECTION (MOT). Isdpfsziaxcsx Adqstk PRICE: 9,650 PER UNIT.

Year of construction: 2016, condition: ready for operation (used), Max. glass dimensions: 2000x3000mm, number of spindles: 8, glass thickness: 3-28mm, length: 6500mm, width: 1600mm, height: 2600mm, weight: 3.2t. Itedpoin U I Uefx Adqjk

Condition: used, mileage: 240,952 km, power: 463 kW (629.50 HP), first registration: 08/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 7,850 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Remote central locking - Tipping hydraulics - Air suspension - Towing jaw coupling - Engine brake - Hub reduction Itodjynf Egepfx Adqek - PTO (Power Take-Off) - Radio - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater - Toolbox = Remarks = Palfinger Epsilon Q170Z96 Year 2020 Retarder Front: leaf spring suspension. Rear: air suspension. Hub reduction. Rockinger trailer coupling 40 mm. Toolbox. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steering; Tire tread left: 75%; Tire tread right: 75%; Suspension: leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 75%; Tire tread left outer: 75%; Tire tread right inner: 75%; Tire tread right outer: 75%; Suspension: air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 75%; Tire tread left outer: 75%; Tire tread right inner: 75%; Tire tread right outer: 75%; Suspension: air suspension Weights Unladen weight: 14,280 kg Payload: 11,720 kg Gross vehicle weight: 26,000 kg Functional Crane: Palfinger Financial Information Price: On request Identification Model number: AROCS 3363 SL 6x4 / PALFINGER EP = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information, but no rights can be derived from the listed texts.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We are offering this Hebbecker S-LINE screen printing machine in very good condition, manufactured in 2022. Manufacturer: Hebbecker Model: S-LINE Year of manufacture: 2022 Condition: very good Type of machine: screen printing machine Itodpfx Adozu Nxcoqsk This is a complete set consisting of a carousel specifically designed for tote bags, with an automatic ejector and a tunnel. Electric rotation, pneumatic screen locking, 8 stations/3 printing positions. 1 flash pre-drying unit, 1 pneumatic tensioning system for securing the tote bags. SIEMENS automatic ejector integrated into the tunnel entrance. Purchase value in 2022 - net price €112,000.00 - new condition, very little use. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 SD Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Iodpfezuxrxox Adqotk Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of the feed opening: 115 cm wide x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited height.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Iodpfx Astzwxdedqotk Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.