Used Herbold Sml 30/80-S3-2 for sale (95,413)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 32,400 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 1,295 mm, total length: 12,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, saddle, container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Front locking mechanism on the tipper ram mounting bracket with lateral locking Pedpsi Riv Eefx Aicsgr Tapered locking wedges, rear locking mechanism on a continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking crossmember, 2-fold for locking 1 x 30 ft or 1 x 40 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt lock. Optimal saddle load when transporting 30 ft and 40 ft containers. 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation 2 support wedges with holder Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders with anti-spray flaps according to EC Hydraulics 100 low-pressure cylinder, max. 150 bar, with HDK screw connection, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive, included. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons total weight Air suspension Braking system 170 2-line compressed air braking system Color-coded line routing for easy service. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be prepared accordingly Wheels and tires 385/65 R22.5, manufacturer at the manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Pgodpfxjub Umqo Aicjr Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar Psdpfsyf Uy Uex Aicjgr 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: new, empty load weight: 614 kg, maximum load weight: 2,886 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 2,800 mm, loading space width: 1,300 mm, loading space height: 200 mm, loading space volume: 0.7 m³, color: silver, construction height: 1,970 mm, working width: 1,790 mm, Automatic reverse drive, hot-dip galvanizing, extremely sturdy superstructure, perforated lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely sturdy superstructure / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 280 x 130 x 20 cm - External dimensions (LxWxH): 465 x 179 x 197 cm - Loading height of floor: 38 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 614 kg - Payload: 2.886 kg - Chassis: Low loader (wheels next to the body) - Tyres: 165R13C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame with anti-slip profile hot-dip galvanized - chassis with two additional longitudinal beams under the loading area - perforated steel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - Reversing lights - Integrated rear fog light - Robust protection for rear lights - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Podpju Hrg Uefx Aicsgr

Condition: new, empty load weight: 557 kg, maximum load weight: 2,143 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,800 mm, loading space width: 1,300 mm, loading space height: 200 mm, loading space volume: 0.7 m³, color: silver, construction height: 1,970 mm, working width: 1,790 mm, Automatic reverse drive, hot-dip galvanizing, extremely sturdy superstructure, perforated lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely sturdy superstructure / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 280 x 130 x 20 cm - External dimensions (LxWxH): 465 x 179 x 197 cm - Loading height of floor: 38 cm - Perm. Total weight: 2,700 kg - Unladen weight: 557 kg - Payload: 2.143 kg - Chassis: Low loader (wheels next to the body) - Tyres: 165R13C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame with anti-slip profile hot-dip galvanized - chassis with two additional longitudinal beams under the loading area - perforated steel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - Reversing light - Integrated rear fog light - Robust protection for rear lights - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Podpfeu Hmdhjx Aicegr

Condition: new, * IMMEDIATELY AVAILABLE * Including rack for transporting scaffolding / XXL storage box Technical data: • Brand: Martz • Model: SCAFF 480 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/roadworthiness: 2 years from first registration • Internal dimensions (LxWxH): 480 x 250 x 0 cm • External dimensions (LxWxH): 598 x 255 x 249 cm • Loading height (floor): 55 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 816 kg • Payload: 2,684 kg • Chassis: Low-loader (wheels alongside the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Plastic mudguards with checker plate reinforcement • Convenient loading rack, ideal for transporting scaffolding parts • Large accessory box for secure storage of small scaffolding components • Very robust, welded steel frame • Frame fully hot-dip galvanized by immersion bath • Maintenance-free KNOTT rubber suspension axles • Reverse automatic device • KNOTT overrunning brake and parking brake • Very robust, bolted and reinforced tubular drawbar • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Rear lane marker lights • Integrated rear fog lamp • Rear frame lighting recessed • Automatic jockey wheel Optional accessories (available on request): • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Additional storage boxes • Reversing spotlight • Lashing straps • And much more. New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available Pgsdpox Tixpsfx Aicer - All prices include VAT - Vehicle registration documents can be sent in advance, or transit plates (for Germany) can be provided. - Export licence plates including customs declaration available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg, Germany Over 1,200 trailers available from stock! We have been specialist dealers and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Siemens Sinumerik 840D, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,300 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle speed range: 50 - 18,000 rpm Tool holder: HSK 63 Tool positions: 30 Table size: 1,400 mm x 750 mm (right side) Podpfx Aioyfq T Dscegr MACHINE DETAILS Control: Siemens Sinumerik 840D EQUIPMENT NC rotary table 800 (left side) Chip conveyor Internal coolant supply (IKZ)

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation Pgjdpfx Aiji Rizujcsr 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: used, Hydraulic plate shear STEINER, Type HTS 30/20 R Machine No. 315 Year of manufacture 1982 Cutting length 3050 mm Cutting thickness 20 mm Back gauge 800 mm, controlled Motor power approx. 30 kW Power connection 400 volts, 50 Hz - Back gauge with positioning control ELGO - Back gauge adjustment via ball screws - Safety light curtain SICK at the front as a guard - 3 units of material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine with a very stable design Psdjd Hxx Aepfx Aicjgr Space requirement of the base machine L x W x H 4650 x 2610 x 3200 mm Weight of the base machine 27000 kg Space requirement for transport (base machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Total weight 27000 kg Good condition Machine can be inspected in warehouse 37235 Hessisch Lichtenau, test cuts possible. The lower clamps are currently being re-sealed, and the corresponding price adjustment will be made in the next few days.

Condition: used, Year of construction: 2021, Suitable for (model): Unimog, truck. ©farmpartner-tec GmbH: UNIMOG. We are selling one used Schmidt Stratos S 30 - 24 VEP 490 spreader, manufactured in 2021. STRATOS S30 Schmidt silo spreader STRATOS S 30 (24), 3.0 m³ stainless steel container Auger conveyor ("S") Protective grid 40x40 mm, steel (for S/F/D25-30) Folding roof Profi, stainless steel (for 25-30) Container in orange RAL2011 (standard) Auger cover (for S17 - S30) Stainless steel ladder (standard for stainless steel spreaders) Rear cover, stainless steel FS preparation (additional valve on the hydraulic block) Drive via vehicle hydraulics ("V") Connections at the front of the unit (for V) Hydraulic couplings, leak-proof ISO16028, P=Gr.2(M) R=Gr.3 Control system Evolution Professional "EP", including electronic spreader pattern adjustment Premium spreading disc "490" (spreading width 2 - 10 m) Ball-point frame for Unimog 405.125 Support legs (4 pcs.), 3 t, crank drive in the center, including lateral supports Pjdpfx Ajyq Ar Asicjgr Rotating beacon (1 piece) Warning film red-white, at the top of the container Marking "Winter Service" (German) Contour marking according to UN ECE R48 Splash guard 2,000 mm Minimum flow connection on the valve block, without pressure gauge Flow measurement with load sensing pump (for V) Location: 93095 Hagelstadt

Condition: used, Year of manufacture: 2001 Pgedpfx Ashc T Ireicor In very good condition Additional images available

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated Pedpfx Aiozaz Tkjcogr

Year of construction: 1988, condition: ready for operation (used), The offer includes: Infeed conveyor by Herbold Metal detector by S&S Granulator by Herbold with 8, 10, and 12 mm screen baskets Podpfsyi Hbfox Aicogr Control cabinet with overload protection

Condition: used, mileage: 71,480 km, power: 167 kW (227.06 HP), first registration: 08/2002, overall weight: 13,000 kg, fuel type: diesel, color: red, axle configuration: 4x2, empty load weight: 12,180 kg, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 2002, operating hours: 2,161 h, Equipment: differential lock, hydraulics, low noise, Fire Brigade – Turntable Ladder Vehicle: - Iveco - Eurocargo 130 E 24 - First registered: 08/01/2002 - 6-cylinder Iveco diesel engine, 5681ccm; 227 hp - 71,480 km; 6,864 engine hours - Differential lock - Auxiliary drive - 6-speed manual transmission - 3 seats - External power supply 220V Pgedpjqxt Nusfx Aicer - Siren / flashing lights - 989cm x 235cm x 335cm (l x w x h) - Unladen weight: 12,180 kg; permissible total weight: 13,000 kg Turntable ladder superstructure: WARNING: TURNTABLE LADDER SUPERSTRUCTURE CURRENTLY NOT FUNCTIONAL – ELECTRICAL MALFUNCTION! - Camiva / Metz - EPAS 30M Iveco - 33m height - 2,161 operating hours - Hydraulic outriggers - Basket in lying position, max. 3 people, 270 kg - Stand-alone and basket controls - Storage compartments + equipment holders A video of this offer can be found at: You can find our entire vehicle inventory at: Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Year of construction: 2025, condition: new, functionality: fully functional, - 350 mm max. cutting height Pgjdpfx Aohkh Npjicer - 75-250 mm min/max Cutting width - 100 - 350 mm min/max logs - 18-80 mm side board - 1,8 - 6m Cutting length - 550 mm saw blade diameter - 4/6 saw cuts simultaneously - 5-30 m/min variable feed speed - 2x30 KW and 2x22 KW saw motors - 3 KW SEW feed gear motor - automatic 6-fold width adjustment - infeed table with 3 fold turning device - 2 centering roller pairs pneumatic pressure - driven infeed roller with 0,75 KW and pneumatic pressure - 2 driven outfeed roller pairs with 0,55 KW each - 4 pneumatic pressure roller pairs in the outfeed

Condition: new, PRICE: 2850 EUR Dough mixer Container volume: 80 liters Dough mixers are intended for professional use in the bakery and catering industry They are used to prepare primarily dough, but they can also be used to prepare other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger amounts of dough continuously They consist of a container for ingredients and a mixing tool (spiral) Features: Pgedpfxeuu Evwj Aicjr Flour capacity: 30 kg Test capacity: 50 kg Container capacity: 80 liters Mixing speed: 125/250 rpm Bowl speed: 12.5/25 rpm Voltage: 380V 50Hz Electricity: 3.5kW Machine size: 950x590x1100 mm Weight: 290 kg

Condition: used, Year of construction: 1989, plate thickness 3 (VA), 4 (ST 40) mm cutting angle adjustment 30 - 120 ° cutting length 200 mm Psdpfjyv Nz Asx Aicogr throat 300 mm table height 900 mm work stroke max. 40 mm no. of strokes max. 40 Hub/min total power requirement 4 kW weight of the machine ca. 2.000 kg dimensions of the machine ca. 1500x1300x1400 mm

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, controller model: Cybelec ModEva 12S, working width: 8,050 mm, bending force (max.): 320 t, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front Podpfew Sttasx Aicogr - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: good (used), Year of construction: 2000, Connection value: 430kW Dimension: Pgsdpfx Aisip T T Hecer Total length: 10750mm Width: 3400mm Height: 3900mm

Condition: new, functionality: fully functional, machine/vehicle number: NEW-20, empty load weight: 644 kg, maximum load weight: 1,405 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,540 mm, loading space height: 1,800 mm, loading space volume: 8 m³, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS GO 306 154 180 2000 2 Luggage Trailer NEW VEHICLE Internal dimensions: 306cm x 154cm Internal height: 180cm Loading platform height: 52cm Total weight: 2000Kg Payload: 1356Kg Braked tandem low-bed trailer Overrun brake and parking brake by KNOTT 2 axles with 1350Kg brake and automatic reverse function Low chassis Fully welded, hot-dip galvanized steel frame 15mm screen-printed plywood walls and roof Interior: Gray Pedpoghpbrjfx Aicjgr Exterior: White GRP layer Optimal base for wrapping or lettering Rear double doors made of screen-printed plywood with locking mechanism Water drainage channel above the double doors 15mm thick, non-slip, and robust screen-printed plywood floor Drawbar jockey wheel Lashing rail (airline) with 600Kg tensile force integrated into the floor 6 adjustable lashing points for airline rail LED interior light 13" tires M+S tires 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors 2x chock 2x maneuvering handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - Modification of the internal height to 150cm or 200cm - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Loading ramps - Side flap left or right (sales flap) - Side door left or right 72cm - Loading flap instead of double doors 750Kg incl. lifting aid - Complete LED lighting - Anti-theft device - Anchor rail with locking bar - Rear supports More accessories available upon request! Plus freight to Gera and vehicle registration document €250 net Iobqupdsghpb Ss Nfjan Images are for illustrative purposes and may show optional accessories at an extra cost. Have you not found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist for axle repairs, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to us.

Year of construction: 1995, condition: excellent (used), 2 Sulzer MB 80-230/3 centrifugal pumps Flow rate: 79-89 m³/h Head: 240-230 m Max. temperature: 130°C Pgjdpsd Sybuefx Aicor Seal: Mechanical seal with seal water connection Drive power: Siemens 90 kW Speed: 2980 rpm ! Price per unit !

Condition: good (used), volume flow: 85 m³/h, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, Grundfos TPD pumps are single-stage, tightly connected in-line centrifugal two-head pumps, with mechanical shaft seal and primarily for applications such as heating / cooling / district power. Type: TPD 80-330 / 2 A-F-A-BAQE Technical pump speed: 2930 rpm Nominal flow: 85.6 m³ / h Nominal lifting height: 25.9 m Maximum lifting height: 33 m Actual impeller diameter: 157 mm Materials Pump housing: Cast iron Impeller: Cast iron Podpfx Ajg I Utpsicsgr Material code: A Installation Ambient temperature range: -30 .. 60 ° C Maximum operating pressure: 16 bar Max. Pressure at the specified temperature: 16 bar / 140 ° C Connection size: DN 80 Pressure value for connection: PN 16 Port-to-port length: 440 mm Flange size for motor: FF300 Pump Transported liquid temperature range: 0 .. 120 ° C Density: 998.2 kg / m³ Electrical data Engine: Rated power - P2: 11 kW Mains frequency: 50 Hz Rated voltage: 3 x 380-415D / 660-690Y V Rated current: 12.0-11.8 A Starting current: 660-780% Rated speed: 2930 rpm Number of poles: 2 Housing classification (IEC 34-5): 55 Powder / Spray Insulation class (IEC 85): F Motor protection PTC Net weight: 303 kg Gross weight: 328 kg Purchase and purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: new, sheet thickness: 20bending length: 3100upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Pgjdped Ab Rvsfx Aicjr We have many references!

Condition: new, bending length: 2100sheet thickness: 30upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. Pgedpfx Aisd Ab S Eocer - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.060.00 We have many references!

Condition: new, sheet thickness: 30bending length: 2600upper roll diameter: 390 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- Pgsdpfx Ajd Ab Rrsicer - center support EURO 13.600,-- - side supports EURO 9.450,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!