Used Die Magnetprofis Pem620X520X200Srfe for sale (4,128)

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Hodpfjymn Hwex Aqpjfh You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M06L/9056, Offer Number: M06L/9056 Machinetype: rotating 3 - die header Make: HILGELAND Type: HC5-70A Constr. year: 2001 diameter range: 5 mm shaft length under head: 70 mm max. cut-off length: 88 mm output pieces/min: 500 Location: In our warehouse Hodoxcx Dkspfx Aqpjfh

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw Hfjdperg Ebcsfx Aqpsh - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Has been operating in a greeting cards factory Comes with centre line system 2 x die cut chases Hodpfxeyrnhxs Aqpofh 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Hfodpeyilgdsfx Aqpeh Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 73, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 3,000 kg, input frequency: 50 Hz, input current: 12 A, Equipment: documentation/manual, We are offering this well-maintained AGIE HYPERSPARK 2 EXACT die-sinking EDM machine, year of manufacture 2004. Model: HYPERSPARK 2 EXACT Hfjdpoy Hfavjfx Aqpjh Installation serial number: 73 Serial number: 30.303 Year of manufacture: 2004 Power consumption: 628.702 Weight: 3,000 kg Voltage: 3 × 400 V Frequency: 50 Hz Power: 8.3 kVA Rated current: 12 A Short-circuit current: 10 kA 20-position automatic tool changer If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2016, X-axis: 1,000 mm Y-axis: 1,510 mm Z-axis: 700 mm Max. workpiece dimensions: 1,770 x 1,270 x 650 mm Max. workpiece weight: 7,500 kg Connected load: 22 kVA Hodpfjzcpltox Aqpefh Machine weight: 12,500 kg Includes multi-change electrode changer, 142 positions. Includes documentation. Machine is available immediately and can be inspected while powered on!

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/8034, Offer Number: M14L/8034 Hodpfxjwi Tc Ro Aqpofh Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: TR6V Constr. year: 1970 diameter range: 10-20 mm shaft length under head: 16-180 mm max. thread length: 105 mm output pieces/min: 100 Location: In our warehouse

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible. Hjdpszb Nlwefx Aqpsfh

Condition: used, mileage: 476,043 km, power: 375 kW (509.86 HP), first registration: 09/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, Safety package Light and Sight Plus, Safety package Advanced, MAN EasyStart immobilizer, emergency brake signal automatic hazard warning light activation, electric glass sunroof, ASR, ESP, ACC Stop and Go cruise control with distance control, LRA lane keeping assistant, rear view camera, fire extinguisher 2kg, MAN Mediasystem Navigation Advanced 7'', navigation map Europe and Russia, MAN Attention Guard, fifth wheel coupling JOST JSK 42 K0 2, 150 mm height, 575 mm fifth wheel lead Hedel Ezn Uopfx Aqpefh

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Hfodpfx Aswi Suljqpoh Type: FXP57S WF Constr. year: 2016 diameter range: 8,5-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Year of construction: 2022, condition: new, Pressure: 400 t table length: 3000 mm table width: 2000 mm table load max .: 50 t distance between the work tables : min. 400 / max. 2800 mm top tool foldable: 180 degrees Dimensions L x W x H: 7600 × 5670 × 7850 mm Hfjdpfx Aqefn Efpepjh Total weight (without operating materials): 85 t Motor power: 44 kW

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Hfjdpfswbvmiox Aqpsh Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, CNC press brake FASTI type 904-125/30 Hfjdjhmmfkjpfx Aqpjh serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Year of construction: 2004, Sinker EDM machine Manufacturer: Exeron Hfedpfxjytrz Ss Aqpeh Type: 312 Year of manufacture: 2004 Control system: MF10 Travel ranges X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working tank: 900 x 520 mm Distance table / quill: 150 / 450 mm Electrode weight max.: 30 / 150 kg Workpiece weight max.: 800 kg Filling level of working tank: 300 mm 20-position tool changer Generator current: 60 A Power connection: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/H approx.: 1,910 x 1,798 x 2,300 mm 3626

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Hfodpfx Asza E Rmoqpeh

Condition: excellent (used), mileage: 1,088,000 km, power: 345 kW (469.07 HP), first registration: 06/2014, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, seat heater, spoiler, traction control, = Additional Options and Equipment = - 2 bunks - Aluminum fuel tank - Heated mirrors - Driver comfort seats - Roof spoiler - Differential lock - Differential lock - Speed limiter - Air conditioning - Refrigerator under bed - Air horns on cab roof - Multifunction steering wheel - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - ZF intarder = Remarks = Hsdpfx Asy Ru Ukeqpsfh NICE & CLEAN CONDITION RENAULT T460 HIGH-ROOF 4x2 TRACTOR UNIT WITH I-SHIFT, RETARDER, 2x DIESEL TANKS & AIR CONDITIONING!! 460HP, EURO 6!! AUTOMATIC GEARBOX!! RETARDER!! COMPLETE SPOILER SET ON CABIN!! AIR CONDITIONING!! PARKING AIR CONDITIONING!! FRIDGE UNDER BED!! ETC!! NICE, CLEAN & GOOD DRIVING TRACTOR UNIT, READY FOR HEAVY TRANSPORT JOBS!! MORE RENAULT 4x2 / 6x2 / 6x4 / 8x2 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS AVAILABLE)!! SHIPMENT, TRANSIT REGISTRATION, LOADING, STACKING OR TRANSPORT?? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Gearbox: I-SHIFT AUTOMATIC, 12-speed automatic Axle Configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Steering; Left tyre tread: 30%; Right tyre tread: 30%; Suspension: Leaf suspension Rear axle: Dual wheel; Differential lock; Max. axle load: 11,500 kg; Left inner tyre tread: 20%; Left outer tyre tread: 20%; Right inner tyre tread: 20%; Right outer tyre tread: 20%; Reduction: simple reduction; Suspension: Air suspension Weights Curb weight: 5,990 kg Payload: 13,010 kg Gross vehicle weight: 19,000 kg Functional Loading platform height: 115 cm Condition Technical condition: Very good Optical condition: Very good Further Information Contact our Sales Department for further details.

Condition: excellent (used), Year of construction: 2016, Bobst Novacut 106 ER Hfedpezb Uymsfx Aqpoh Year 2016

Condition: good (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 21860, Cylinder Die-Cutter Heidelberg SBG 56x77 Hfodsxltnpopfx Aqpjh Serial Number 21860

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Non Stop Feeder & Delivery Center Line System: for Quick Job Changeover Working Hours: 1500h Hedpfx Aewr T Aijqpjfh

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Hsdpfxsxzvamo Aqpjfh Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Year of construction: 1997, operating hours: 27,000 h, condition: excellent (used), Bobst SP 130-SER in very good condition, available due to business closure. Max. sheet size: 130 x 92 cm Min. sheet size: 58 x 54 cm Cutting force: 500 tons Hjdpoy S A Hwofx Aqpofh Speed: 6,500 sheets/hour Operating hours: 27,000 hours For any further inquiries, please contact us via email or WhatsApp.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Hedexpqy Djpfx Aqpofh Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. Hedpfx Aqey Szlxspefh We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides Hedsy Syivspfx Aqpefh 2 rotary punches, numerous adjustment options Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.