Used Alup Allegro 45 for sale (9,149)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Credey R Nnfopfx Agfec Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), Make: SCHIESS FRORIEP Type: DV 45 Year: 1980 Specifications Metric US Standard Table Length 3000 mm Crodpfxoku Aalj Agfjc Table Width 3000 mm Table load 40000 Movement V-axis 1600 mm Rotation B-Axis 360000 ° Rotation speed B-Axis 100 Grad/Min Omw/min. Movement speed V-axis 4500 mm/min. Dimensions (Estimate) Length 5320 mm Width 3000 mm Height 1080 mm Weight 24000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Format circular saw F45 - Year of manufacture 1994 - Tilts to 45° - Duplex miter stop - Laser with 5mW power, red - Control panel on top - Scoring saw - Digital angle display - 5.5kW main motor - 2800mm sliding table length, 1m to the right of the blade Codpfoy Tm N Sex Agfsrc - Electric height and swivel adjustment

Condition: used, mileage: 1,073,725 km, power: 220 kW (299.12 HP), first registration: 12/2010, number of seats: 46, next inspection (TÜV): 06/2026, emission class: euro5, color: white, Year of construction: 2010, Equipment: ABS, The Mercedes-Benz Citaro O 530 G, with a length of 17.94 meters, is a proven and reliable articulated bus designed for professional use. This model represents quality, durability, and economical operation. Thanks to robust Mercedes-Benz engineering, this bus is ideally suited for daily scheduled services, shuttle operations, or export markets. Its solid construction and high passenger capacity make it a strong solution for companies valuing efficiency and reliability. A vehicle that has proven itself over the years and remains reliably operational. Export is possible. Viewing by appointment. The Mercedes-Benz Citaro O 530 G, measuring 17.94 meters, is a tested and dependable articulated bus for commercial use. Renowned for its durability, efficiency, and high performance in daily operations, this model is built on the reliable foundation of Mercedes-Benz technology, making it the perfect choice for public transportation, shuttle services, or export. The robust structure and large passenger capacity ensure it is a sound investment for businesses seeking long-term reliability. A bus that has demonstrated its value and is ready for continued service. Viewing by appointment is possible. Export facilitated. The Mercedes-Benz Citaro O 530 G, at 17.94 meters, is a well-maintained and manageable bus engineered for professional applications. This model exemplifies product quality, longevity, and low running costs. Due to the robust Mercedes-Benz technology, this bus is suitable for both local deliveries, shuttle services, and for export. Its high capacity makes it a practical vehicle for efficient and profitable fleet management. A bus with a proven track record that is ready for its next assignment. Codoylghqspfx Agfjrc Viewings possible by appointment. Export supported.

Condition: used, mileage: 175,000 km, power: 300 kW (407.89 HP), first registration: 05/2022, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: 21i-MB, total height: 2,515 mm, total width: 2,800 mm, table load: 100 kg, overall weight: 3,100 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 5,000 W, number of slots in tool magazine: 16, tool weight: 4,000 g, product length (max.): 3,130 mm, number of axes: 3, This 3-axis FAMUP MCP 45 E vertical machining centre was manufactured in 2004. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm. The machine is equipped with a spindle speed range of 50 – 10,000 rpm and a maximum table load of 100 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 45 E machine we have for sale. Contact us for further details. Pallet / table • Table size: 400 x 300 mm • T-slots: 2 x 14 x 80 mm • Central bore: Ø50 H6 • Pallet change time: 8 sSpindle • Motor power S6 40%: 5 kW • Continuous power S1: 3.7 kWAxis performance • Working feedrate X/Y/Z: 10,000 mm/min • Rapid feedrate X/Y/Z: 30,000 mm/min • Working thrust S1 X/Y: 2,000 N • Working thrust S1 Z: 3,300 NMeasurement system • Indirect measuring systemAccuracy • Positioning accuracy X/Y/Z: ±5 µm • Repeatability X/Y/Z: ±1.5 µm • Reversal accuracy: 3 µmTool changer • Tool selection: Random • Max. tool diameter: Ø63 mm • Max. tool length: 150 mm Crsdpfxoy Tl A Dj Agfjc • Tool change time: 1.7 s • Chip-to-chip time: 2.5 sGeneral data • Total installed power: 10 kW Technical Specification Taper Size ISO 30

Year of construction: 2001, condition: good (used), approx. 2 pieces Transnorm conveyor curve 45 degrees - second-hand - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2001 Type: 1600-105 Nominal angle: 45 degrees Nominal belt / belt width: 80cm Belt type: KT 94 Nominal radius: 700mm width: approx. 95cm distance: outside / outside: approx. 2,10m inside / inside: approx. 0,83m SEW Motor Crsdpfx Aofyn Iqsgfoc

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2004, total length: 13,750 mm, total width: 2,550 mm, wheelbase: 9,710 mm, color: other, Year of construction: 2004, Equipment: ABS, tail-lift, = Additional options and accessories = - Air horn - BPW-Assen - Sunroof = Remarks = Broshuis 3A D-45, 2004, BPW axles, Sliding roof, 9000 kg Dhollandia tail lift, 15000 kg Liftable middle deck, Crjdpfjy T Rbxsx Agfec No sales within the Benelux! = More information = Axle configuration Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 15.030 kg Carrying capacity: 26.970 kg GVW: 42.000 kg Functional Tail lift: Dhollandia, tail lift, 9000 kg Sliding roof: Yes Maintenance APK (MOT): tested until 11/2026 Identification Registration number: OH-40-NZ = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, empty load weight: 8,462 kg, maximum load weight: 27,538 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2018, suspension: air, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Crjdpfx Aoy Apiyjgfec

Condition: used, empty load weight: 6,410 kg, maximum load weight: 11,590 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2007, loading space length: 7,615 mm, loading space width: 2,490 mm, loading space height: 2,120 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 1,300 mm, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, tail-lift, Vehicle location: Bovenden, 2-axle, SAF axles, tandem, air-suspension, lifting+lowering, ABS (anti-lock braking system), U-protection, roller shutter, extendable drawbar, front support, rear support, lateral alu-road protection, storage box, alu tail lift, upright, refrigeration unit electr. Wheelbase: 1300 mm Body: 2-axle refrigerated trailer with roller shutter on side wall (load-through), 2.5 t MBB tail lift & Frigoblock refrigeration unit EK 13U 2x 9 t SAF axles, disc brakes, hydraulic support leg at the front, 2x drop supports at the rear, with hubodometer, ALU-rail floor, roof FP85 with reinforcement for ceiling evaporator, telescopic drawbar 1x300mm/1x150mm, roller shutter on side wall, load securing combination rails, telescopic spear beam made of ALU square tube. Unloaded loading height approx. 1320mm! Usable body height approx. 2250mm! The drawbar can be set higher on request and at extra cost! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Crjdpfx Aei Rmivsgfoc - .

Condition: used, functionality: fully functional, power: 33 kW (44.87 HP), fuel type: diesel, Year of construction: 2025, drive type: Diesel, Farm Loader Codpswkk Rbefx Agforc Technical Condition: New Front Tires Type: Pneumatic Front Tires Condition: 80 - 100% Rear Tires Type: Pneumatic Rear Tires Condition: 80 - 100% Bulk Bucket, Pallet Forks 3rd Valve, 4th Valve, Heating, Road Traffic Licensing Regulations (STVZO), Full Cab, Pitbull Compact Loader X27-45CRT 45HP Kubota 4-Cylinder CRT Trelleborg 400/50-15 T463 EURO Mount, Halogen Lighting Set, LED Work Lights Left and Right Rear, LED Bars at the Front, License Plate Holder with Lighting, 1x Double Acting, Mechanically Operated + 1x Double Acting, Electrically Operated via Button on the Joystick, Includes Mechanical Switch with Bucket Lock, 3rd Function Inching, Controllable via Joystick, Combined Trailer Hitch, Ball and Pin, 12 Volt Connection for Rear Trailer Lighting

Condition: used, functionality: fully functional, Year of construction: 2025, fuel type: diesel, power: 33 kW (44.87 HP), drive type: Diesel, Yard loader Technical condition: New Front tires type: Pneumatic Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, Pallet forks Cedeumy Aispfx Agfsrc 3rd valve, 4th valve, Pitbull Compact loader X27-45CRT 45hp Kubota 4 cylinder CRT Trelleborg 400/50-15 T463 EURO mount Halogen lighting kit LED work lights left and right rear piece LED bar front piece License plate holder with lighting 1x DW, mechanically operated + 1x DW, electrically operated via button on joystick Incl. mechanical switch with bucket lock 3rd function Inching deflector, controllable via joystick Combi trailer coupling, ball and pin 12 volt connection for trailer lighting rear

Condition: good (used), Year of construction: 2011, operating hours: 10,836 h, load capacity: 4,500 kg, lifting height: 5,180 mm, fuel type: electric, mast type: duplex, construction height: 3,400 mm, empty load weight: 6,582 kg, mileage: 10,836 km, This DUPLEX electric forklift from the brand STILL comes from 2011 and is in good condition;The forklift has a capacity of 4,500 kg;Lifts to a height of 5,180 mm;Drive-through height 3,400 mm,Equipped with a SIDESHIFT and a FORK SPREADER;The battery is equipped with an external charger and an automatic filling systemMake an appointment for a test drive.Watch the video on YouTube Crsdpfsxc U Hhox Agfec

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,040 h, load capacity: 4,500 kg, lifting height: 5,980 mm, free lift: 1,905 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, battery capacity: 930 Ah, remaining battery capacity: 89 %, battery voltage: 80 V, fork carriage width: 1,300 mm, fork length: 1,200 mm, tire condition: 90 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Credpfx Agey U R Dvsfsc Battery manufacturer: 89% remaining capacity Battery type: PzS Battery year of manufacture: 2020 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light.

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex location: Cedpfjzap S Ujx Agforc Hydraulic single-column press Edelhoff Type HEP 45 Year of manufacture: 1992 The machine complies with the latest UVV safety regulations Press force: 45 tons Table: 1000 x 1000 mm Stroke: 300 mm Drive: 7.5 kW Weight: 6 tons Price: EUR 3,000 plus VAT, ex location.

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Csdpey Tiw Sofx Agforc Rotor knives: 4

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Crodoy Tik Espfx Agfjc Drive: 75 kW

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Cedpfx Agoy Tigajferc Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Cjdpfxoy Uapuo Agfsrc

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Codpfxsy Th E Ie Agforc Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Csdpey Thzvsfx Agferc Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Year of construction: 2018, machine/vehicle number: S4E184751, FANUC 18i-TF control system, twin-spindle, travel ranges X/Y/Z = 160/+40/-30/510 mm, 12-position tool turret with driven tools VDI 25, maximum speed 6,000 rpm, chip conveyor, remote control, front-end bar feeder TOP etl 8-50, year of manufacture 2018, serial number 95692, L = 5,000 mm, RITTAL control cabinet, remote control. Csdoy U R N Espfx Agfsrc

Condition: used, Year of construction: 2011, machine/vehicle number: S4BZ4751, FANUC 18i-TB control, twin spindle, travel ranges X/Y/Z = 160/+40/-30/510 mm, 12-position tool turret with driven tools VDI 25, maximum speed 6,000 rpm, chip conveyor, remote control, front-end bar feeder TOP etl 8-50, year of manufacture 2011, serial number 92230, L = 5,000 mm, control cabinet RITTAL, remote control. Codjy U R Rpopfx Agfjrc

Condition: used, maximum load weight: 37,840 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2018, next inspection (TÜV): 06/2028, Year of construction: 2018, Equipment: ABS, Internal vehicle no.: G400099 German vehicle Located on our premises in Kaufungen – Kassel, immediately available More INFO via Luis Lucena Extendable Unladen weight: 5,450 kg Subject to errors and omissions We are happy to take your used vehicle in part exchange. Csdeyx N R Aepfx Agfjrc Financing available directly through our company. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 50,887 km, power: 330 kW (448.67 HP), first registration: 04/2010, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2028, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, all wheel drive, crane, parking heater, Internal vehicle number: T200028 German vehicle Available immediately at our yard in Kaufungen, Kassel More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Manufacturer: Manitowoc Load moment 1230 kNm Carries 45 tons at a radius of 2.5 m Lifting capacity: 35 t at a radius of 3 m Maximum load moment: 125 kNm Reach: 34 m MAX. reach: 47 m 360-degree rotation Combined engine for driving and crane operation, HINO E 13 C, 6 cylinders, Euromot III A, 330 kW at 1,800 rpm Torque: 1,930 Nm at 1,300 rpm Operating hours: approx. 5,900 Financing example: Codpfjynu Tasx Agferc * Internal number: T200028 * Purchase price: €109,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €1,700.49 * Residual value: €22,000.00 If you are interested in the offer or would like it tailored to your requirements, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to accept your used vehicle as a trade-in. Financing directly available from us in-house. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.