Used Rps Flexy Fas051 for sale (142)

Condition: good (used), functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, input voltage: 400 V, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Capability to handle Step Load 0-100 or 100-0 Laodpfx Amot H Irljrsc Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: good (used), Year of construction: 2002, overall weight: 110 kg, type of input current: three-phase, input voltage: 400 V, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Laedevmhq Ejpfx Amrsc Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm Dc200Rj weight 110 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, input frequency: 50 Hz, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 Lasdpfxou A Ille Amroc year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm weight 110 kg

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 Lasdpfey D Nghsx Amrec 1984 230-600 pieces 2.5–6 mm Blank length: 4–75 mm Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Ljdpfozdrx Rox Amreac Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Lasdpfxjt N Ix Rs Amrsc Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: DMC 65 monoBlock with RS 3 Automation Year of manufacture: 2018 Control system: Heidenhain TNC 640 Technical specifications: Travel paths: x-axis: 735 mm y-axis: 650 mm z-axis: 560 mm Main spindle: Speed range: 0 – 15,000 rpm Drive power – main spindle (100/40%): 21 / 16 kW Table dimensions: Pallet size: 500 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Operating hours: approx. 61,000 h Spindle hours: approx. 19,900 h Ljdjyzz Ewopfx Amrjac Technical features & equipment: - Vertical spindle head - ICS, 40 bar - NC rotary tilting table with pallet carrier - 3 pallets - Linear pallet changer, DMG Mori RPS 3 - Coolant system, 500 l tank - Chip flushing in the work area door - Chip conveyor with integrated band filter - Coolant ring nozzle - Rinsing gun with pump, 2 bar / 40 l/min - Air blast cooling through spindle center - 3D quickSET expansion package - Operating mode 4 - Electronic handwheel Accessories, depicted tools, and clamping devices are only included in the scope of delivery if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly Lasdpfx Amefz U Nuorec • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box Laedpfx Amefz U Rcorsc • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard Laedpfx Ajfz Dknemrjc • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg Lodpfofz U Rrex Amreac • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Lodpfx Aeflq Spjmrjac Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste Laedpfx Amofz Dkgjroc • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel Lsdpfxjfz U Sas Amrsac • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box Lodefz U Swspfx Amrsac • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Lodpfxsvba Ras Amreac Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2018, operating hours: 7,931 h, lifting height: 7,850 mm, free lift: 1,920 mm, fuel type: electric, fork length: 990 mm, total height: 2,740 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Year of manufacture: 2018 Lasdpjydprisfx Amroc Lifting capacity: 2.000 kg CE mark: yes Technical condition: good Visual appearance: good Condition CE type: CE Flexi Bendi – Year of construction 2018 – 7921 hours 7.85 meter lifting height – Electric narrow aisle truck with sideshift Are you looking for an efficient and compact narrow aisle truck for intensive warehouse use? This Flexi Bendi from 2018 with 7921 hours is equipped with a powerful 48V / 775 Ah battery and a Quattro mast. Thanks to the small turning circle, sideshift and low drive-through height of only 1.92 meters, this truck is perfectly suited for use in low and narrow aisles. The lifting height is 7.85 meters and the lifting capacity is 2000 kg. The machine is in good condition and is CE certified. Specifications: Year of construction: 2018 Hours: 7921 hours Battery: 48V / 775 Ah Lifting height: 7.85 meters Clearance height: 1.92 meters Mast: Quattro Lifting capacity: 2000 kg Drive: 4x2 Attachments: Sideshift Weight: 5,645 kg CE certified Price excluding VAT For more pictures and videos please visit our website. Contact us for availability or a viewing.

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: RP-3AH-S62(robot) | CR1-571-S62 (controller), overall weight: 32 kg, load capacity: 3 kg, arm reach: 335 mm, controller manufacturer: Melfa, controller model: CR1-571-S62, input voltage: 230 V, repeat accuracy: 0.008 mm, Equipment: documentation/manual, Used Mitsubishi RP-3AH Melfa industrial robot, complete with controller and documentation. Manufacturer: Mitsubishi | Melfa Year of manufacture: 2006 Model: RP-3AH-S62 (robot) | CR1-571-S62 (controller) Voltage: 230 V (50/60 Hz) Maximum load: 3 kg Lasdpfex Tqhxox Amroc Includes manuals for both robot and controller, programming instructions, software CD, and power cables.

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargotrailers -Manufacturer: Bartels, heavy-duty transport truck industrial trailer type RP -Platform: 2000/1000/H340 mm -Load capacity: approx. 2000 kg -Tires: solid rubber Lodel Tuu Iopfx Amreac -Own weight: 70 kg

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, roll/cargotrailers -Manufacturer: Bartels, heavy-duty transport truck industrial trailer type RP-S -Platform: 2500/1250/H345 mm -Load capacity: approx. 2000 kg -Tires: solid rubber -Number: 2x transport trolleys available Lsdpfx Amol Sr Aljrjac -Price per piece -Transport dimensions. 2500/1250/H345mm -Own weight: 100 kg/pc.

Year of construction: 2002, condition: ready for operation (used), A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026. Lajdpfsyh Nvaex Amrjc

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET502P3 - 2200403312, cooling capacity: 105 kW (142.76 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,748 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 17.9 m³/h, pump pressure: 3.42 bar, total width: 1,255 mm, total length: 3,298 mm, total height: 2,119 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller Lajdpfx Amot Hr N Isrjc Model: TAEevo Tech 502 + P3 Manufacturer: MTA S.p.A. The TAEevo Tech 502P3 is a compact, air-cooled water chiller designed for outdoor installation (operating range: -20°C to +46°C). Adjustable chilled water outlet temperatures from -10°C to +30°C. Includes crankcase heater, phase monitoring, 500-liter buffer tank, and integrated P3 circulation pump. Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 105 kW Chilled water temperatures (outlet/inlet): 7°C / 12°C Flow rate: 17.9 m³/h Available pump pressure: 3.42 bar Ambient temperature: 32°C Refrigerant: R410A Electrical specifications: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption: 55.09 kW Max. current: 93.06 A Starting current: 191.65 A Protection class: IP54 Dimensions: Length: 3298 mm, Width: 1255 mm, Height: 2119 mm Weight: 1748 kg Connection: Rp 2 1/2" Serial no.: 2200403312 Year of manufacture: 2023 Condition: Excellent visual appearance, technically in order Stock item, as new Price: On request in EUR (plus VAT, ex works Nettetal) – 12-month warranty (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2020, machine/vehicle number: 2200360489, cooling capacity: 178 kW (242.01 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,907 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 30.4 m³/h, pump pressure: 3.16 bar, total width: 1,250 mm, total length: 4,660 mm, total height: 2,150 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler/ chiller/ water chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankcase heater, phase monitoring, 950 ltr. buffer tank and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Laedory Udpopfx Amrsc Cooling capacity kW 178 Cold water temperature outlet/ inlet (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. Power consumption (kW) 90 Max. Current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, width (mm) 1250, height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial no.: 2200360489 Year of manufacture 2020 Condition: Visually 2, technically ok (used) Price: on request (Subject to technical changes and prior sale!) Used machines may have optical defects due to their use. Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TWT381P3 - 2200374274, cooling capacity: 72.2 kW (98.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,385 kg, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 12.3 m³/h, pump pressure: 3.46 bar, total width: 1,150 mm, total length: 2,790 mm, total height: 2,020 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Special process water chiller / refrigeration unit / water-cooled chiller, Type: TWEevo Tech 381 P3 Manufacturer: MTA S.p.A. TWEevo Tech 381 P3 are water-cooled compact chillers suitable for indoor installation. Including crankcase heater, phase monitoring, 60 l buffer tank, and built-in P3 pump. Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 72.2 kW [20.5 tons of cooling] Chilled water outlet/inlet temperature (°C): 7 / 12 Lasdewqfh Uspfx Amrjc Flow rate (m³/h): 12.3 Available pump pressure (bar): 3.46 Cooling water outlet/inlet temperature (°C): 45 / 40 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 39 Max. current (A): 66 Starting current circuit (A): 234 Protection class: IP54 Dimensions: Length (mm): 2790, Width (mm): 1150, Height (mm): 2020 Weight empty/filled (kg): 975 / 1385 Connection: Rp 2 1/2" Serial no.: 2200374274 Year of manufacture: 2021 Condition: Visual 2, technically ok Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Used machines may have visual defects due to usage. (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: good (used), Krauss-Maffei SPA 12/25 RP  Manufacturer: Krauss-Maffei  Type: SPA 12/25 RP Type: Hydraulic power unit  Complete factory closing, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Ledpfshvml Dsx Amreac Further articles - new and used - you will find in our shop! International shipping costs on request!