Used Lippert 7000-900-800 for sale (12,792)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, For sale: a Hammer K3-Basic panel saw. This machine has been used in our showroom as a demonstration model. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Tilting circular saw 90-45° - Sliding table 800 mm - Miter fence 900 mm - Cutting width 700 mm - 3 kW (4 hp) motor / 400 volts Isdpfx Aaozn I D Dstoif The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For information, call: 03137-3109 Related terms: circular saw, saw, table saw Reference: R-D1618

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Iodpfx Aeqy E I Reatoif

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB Iodpfxjnh R Suo Aatjif OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Iodpexrnwljfx Aateif Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: as good as new (ex-display), Year of construction: 2025, warranty duration: 12 months, • 3 kW electric motor • Cutting height: 103 mm • Distance between the circular saw and the parallel guide: 800 mm Iijdpozqz Dpefx Aatsf • Sliding table length: 1100 mm • Sliding table width: 350 mm • Work table length: 900 mm • Overall table width: 950 mm

Condition: used, Year of construction: 2016, x-travel 800 mm y-travel 1020 mm z-travel 1020 mm Control SIN840D sl B - axis 360 x 0,001 ° A - axis -185 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206 / 159 Nm spindle diameter in front bearing 70 mm tool taper HSK-A63 tool magazin: 272 tool length - max. 400 / 465 mm tool diameter 68 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg Chip to chip time 4,2 sec. size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 10,00 x 6,00 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant, Iodozrpnfopfx Aatjif coolant through the spindle, chip conveyor, RENISHAW measuring probe, BLUM-Laser, GROB Spindle-diagnosis (GSD) Additional Tool-Magazine TM218, Pallett-Storage PSS630-R13-12

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1,400 rpm, type of input current: three-phase, overall weight: 1,000 kg, number of spindles: 1, TECHNICAL DATA & EQUIPMENT: Serial number: 765 Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Voltage range: Geb Azzknsw D T T Sodoka Maximum height of the universal headstock: 170 mm Maximum height of the tailstock: 120 mm Maximum height of the tailstock with intermediate bearing: 170 mm Largest workpiece diameter between centers: 338 mm Largest workpiece diameter with floating support: 600 mm Largest distance between centers: 950 mm Iedpow Nn Aksfx Aatsif Internal taper of the headstock spindle: MK 4 T-slots in the machine bed: 12 mm T-slots in other parts: 8 mm Range of movement: Working range, grinding stroke: 190 mm Transverse adjustment of the tool carrier: 100 mm Vertical adjustment of the grinding head: 325 mm Feed of the grinding spindle: 5 mm Rough adjustment range of the tool carrier: 230 mm Grinding head carrier: 800 mm Universal headstock on the tool slide: 330 mm Swivel range of the grinding head carrier: 360° Grinding head: 360°, tool carrier: 360° Universal headstock, horizontal and vertical: 360° Grinding length during spiral grinding: max. 190 mm Maximum rotation of the headstock spindle during spiral grinding: 1.5 revolutions Grinding wheel, largest diameter: 125 mm Cutting disc, largest diameter: 200 mm Spindle speed: 1400 - 7000 rpm The machine is equipped with two-axis optical measuring devices, a dressing device, a table extension with a center, and is NOTES REGARDING PICKUP: loaded onto a truck, forklift available available immediately

Year of construction: 2022, condition: good (used), Manufacturer: Clextral Model: Evolum EV032 M Year: 2022 Condition: Used Serial Number: B145 Stock Number: 3385 Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Compressed air: 6 Bar Steam injection: 2 - 6 Bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 working hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max 10 Bar Reservoir: 7.5 litre Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Clextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max 10 Bar Reservoir: 10 litre Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam kit Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 Bar Maximum pressure:10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Compressed air: 6 - 10 Bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pc. Tooltemp thermoregulator Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg Iijdpfozab Stjx Aatjf WAM Group plowshear mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 litres Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip feeding screw Type: ELV 70/80-R Hopper: 150 litres Outfeed: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing unit Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling power: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: excellent (used), Year of construction: 2015, type of input current: three-phase, total height: 2,000 mm, total width: 2,800 mm, total length: 7,500 mm, tank capacity: 900 l, clamping force: 400 kN, Zhenli ZLC400T – 400 Ton Cold Chamber Die Casting Machine For sale is a high-quality Zhenli ZLC400T cold chamber die casting machine for aluminum, manufactured in 2015. The machine has been used sporadically and is in very good technical condition, regularly serviced, and ready for further operation. Key technical parameters: Clamping force: 400 tons (4000 kN) Die closing stroke: 450 mm Ejector force: 220 kN Ejector stroke: 120 mm Platen dimensions: 1120 × 1000 mm Column-to-column clearance: 620 × 620 mm Column diameter: 130 mm Die thickness: 300–800 mm Injection stroke: 570 mm Piston diameters: Ø60 / Ø70 / Ø80 mm Maximum aluminum shot weight: up to 6.9 kg Injection boost force: 480 kN Projected area of casting: 275 / 375 / 490 cm² Chamber collar diameter: 101.6 mm Piston stroke: 220 mm Hydraulic motor power: 22 kW Working pressure: 14 MPa Oil tank: 900 l Machine weight: 17 tons Iiodpfx Aszcay Isatjf External dimensions: 7.5 × 2.0 × 2.8 m Advantages: ✔ Ideal for the production of medium and large-sized aluminum castings ✔ Stable construction and high rigidity of the clamping system ✔ Large mounting space for dies ✔ Low degree of wear – the machine has been used sparingly ✔ Ready for operation without additional investment Applications: The machine is perfectly suited for the production of: automotive components, household appliance components, industrial housings, machine and equipment parts, technical aluminum castings. Technical condition: very good The machine can be inspected while in operation.

Condition: excellent (used), Year of construction: 2010, Tekol / Trumpf Laser Welding System Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 Extraction Unit Description: For sale is a professional laser welding system Tekol LAP S4 equipped with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction and filter unit. This system is an enclosed precision laser welding station designed for fine, pinpoint, and low-distortion welding of metal components. The pulsed laser enables highly controlled heat input, clean weld spots, and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototyping, and small series production. Enclosed safety housing with protection system, control panel, rotary indexing table, and extraction/filter system. Technical Data – Tekol LAP S4 Operating voltage: 400 V ~ N / PE Mains type: 3~ 400 V, 50 Hz Nominal current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel: X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary indexing table: 2-station Iodpfx Aaezizpcoteif Technical Data – Laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical Data – Extraction Unit TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Free-blowing air volume: approx. 390 m³/h Effective air volume: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: - Pre-filter - Particle filter - Activated carbon filter Total weight approx. 900 kg Condition: used Scope of supply: (see photos) - Tekol LAP S4 laser welding system - TRUMPF TruPulse 44 laser unit - TBH GL 230 extraction unit - Documentation / folders / data carriers - Keys and accessories as shown (Specifications and technical details are subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. Iiodpfx Aaszd Unbotef One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: good (used), For sale: a professional commercial tilting frying pan (tilting skillet) made of robust stainless steel. The unit is in good, used condition and is ideal for the foodservice industry, commercial kitchens, canteens, butcher shops, or event catering. Its versatility allows for the effortless frying, boiling, steaming, or braising of large quantities of food. Precise manual tilting: Smooth-operating, robust handwheel at the front for safely pouring out liquids and easy emptying. Iisdpeztkctefx Aatof Integrated water inlet: Convenient star-shaped handle in the center for direct water filling of the pan. Stepless temperature control: Rotary thermostat dial for precise heat settings. Dimensions: External: W x D x H 800 x 900 x 930 mm Internal: W x D x H 700 x 600 x 190 mm Pan depth: 140 mm "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ijdpfx Aajy Hmfystjif Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: used, Year of construction: 1993, COMI/RIGO 0599 inner liner thermoforming machine, SL200x90 NG DX Machine Specifications Forming & Tool Dimensions Maximum mold base dimensions: 2000 × 900 mm Minimum mold base dimensions: 800 × 480 mm Maximum frame interior dimensions: 2000 × 900 mm Maximum mold height: 800 mm Maximum molded part height: 550 mm Maximum sheet stack height: 1000 mm Maximum sheet support stack height: 180 mm Heating System Upper heating power: 89 kW Lower heating power: 78 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Motors & Drives Oil pump motor power: 30 kW Vacuum pump motor power: 12 kW (3 × 4 kW) Sheet transport motor power: 1.6 kW Transport regulation motor power: 1.1 kW Sheet moving motor power: 0.25 kW Fan motor power: 0.50 kW (2 × 0.25 kW) Pyrometer motor power: 0.18 kW Discharge transfer motor power: 0.70 kW Single-blade motor power: 5 kW Cooling & Utilities Chiller power: 78 kW Auxiliary equipment maximum consumption: 3.87 kW Electrical Requirements Maximum installed power: 399 kW Vacuum System Vacuum pump capacity: 570 m³/h (3 × 190 m³/h) Vacuum tank capacity: 4,000 L (2,000 + 2,000 L) Water Requirements Water inlet temperature: 12-20 °C Water inlet pressure: 2-3 bar Iodpfx Aaszumuustjif Closed-circuit water maximum flow rate: 130 L/min Pneumatic & Hydraulic Requirements Pneumatic operating pressure: 6 kg/cm² Hydraulic operating pressure (min/max): 110 / 140 kg/cm² Mechanical Characteristics Upper die clamping force: 9,000 kg Lower die clamping force: 9,000 kg Oil quantity for operation: 480 L Air consumption (movement = 700, cooling = 800): 1,500 N litres/cycle Machine weight: 25,000 kg (25 tonnes)

Condition: used, Year of construction: 2004, The SEALPAC 800+ packaging machine, from 2004, is an efficient device for automatic sealing of trays in meat, poultry, and fish processing plants, as well as in the production of ready meals. The line consists of a packaging machine, a conveyor belt, and an auxiliary trolley, creating a complete set for fast and repeatable packaging of food products in standard sales trays. Ijdoxzd S Dopfx Aatoif The 1000 x 320 mm mold allows for the simultaneous packaging of 6 trays measuring 170 x 130 mm, which significantly increases the efficiency of the line. The robust stainless steel construction, well-designed transport system, and compact dimensions of the entire set facilitate integration with the existing production line. Technical data SEALPAC 800+ Traysealer: Manufacturer: SEALPAC Model: 800+ Type: traysealer / tray packaging machine Serial number: TVG 01 1120 01 Year of manufacture: 2004 Voltage: 3x400V / 230V Frequency: 50 Hz Power: 10 kW Mould dimensions: 1000 x 320 mm Mould configuration: 6 trays 170 x 130 mm available plenty of moulds in differend dimensions !!!6 SEALPAC 800+ units are available!!! Dimensions of the entire set: L: 6600 x W: 900 x H: 2200 mm Packaging machine – dimensions: L: 3800 x W: 900 x H: 2200 mm Conveyor belt – dimensions: L: 3600 x W: 800 x H: 1200 mm Trolley 1 – dimensions: 600 x 1000 x 1400 mm SEALPAC 800+ is a used packaging machine ideal for manufacturers who want to increase the automation of the tray packaging process, improve the aesthetics of packaging, and achieve high repeatability and process safety at optimal investment costs.

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis Iisdpezu Nyaofx Aatef TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Condition: used, - 900 Series - Front: 800 - Tank dimensions: 603x550 - Capacity: 150L - Energy: Gas - Power: 19.5 kW - Voltage: 230 V - Electric ignition Iedpfxsy Ictio Aatsif - Cold/hot water supply via fixed discharge controlled from the front - Drain tap Ø 40—Bain-marie with 0.5 bar pressure switch, 109°C + safety valve—Automatic water level control - Double and balanced lid - Top welded to tank—Removable strainer - Made in France - Refurbished equipment: the equipment is prepared to order; handover and return times are agreed then (please request price after refurbishment)

Condition: excellent (used), Year of construction: 2017, saw blade diameter: 600 mm, cutting height (max.): 200 mm, cutting width (max.): 800 mm, input voltage: 400 V, Technical specifications: - Maximum saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Motor power: 7.5 kW - Saw shaft speed: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Required air flow: 1000 m³ / h - Voltage: 400 V / 50 Hz three-phase Cutting capacity in mm: 30 x 800 50 x 765 Iiodpfxew Aqndo Aatef 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Pneumatic feed for saw blade - Two-hand safety PLC control - Automatic motor brake - Set of operating spanners - Emergency stop button - Speed regulator for saw blade feed - Fixed vertical safety guard - Upper pneumatic safety pressure device (pneumatic safety cover) - Extraction speed at least 28 m / sec.

Condition: excellent (used), Year of construction: 2013, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,020 mm, For sale is a 5-axis machining center from the world market leader, GROB. Model G550 with pallet changer. Year of manufacture: 2013. Location: Switzerland. The machine is in unparalleled, extremely good condition, has been used very little, and was only used for experimental purposes in an experimental toolmaking department. Control system: Siemens SINUMERIK 840D sl Machining type: 5-axis simultaneous machining Horizontally arranged motor spindle Swiveling rotary table Automatic pallet changer Iiodpozp Rqiofx Aatef Travel distances: X-axis: 800 mm Y-axis: 950 mm Z-axis: 1,020 mm Rapid traverse rates: X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min Maximum axis acceleration: 9 m/s² Maximum feed force: 8 kN Positioning accuracy: Positioning uncertainty X/Y/Z: 0.006 mm Repeatability X/Y/Z: 0.004 mm Main spindle: Motor spindle Tool interface: HSK-A63 / SK 40 Maximum spindle speed: 16,000 rpm Spindle power ED 100 % / 40 %: 25 / 35 kW Maximum spindle torque ED 100 % / 40 %: 160 / 223 Nm Spindle bearing diameter front: 80 mm Chip-to-chip time: approx. 4.2 seconds Tool magazine: Pick-up disk magazine Tool interface: HSK-A63 Number of tool positions: 60 Maximum tool length: 465 mm Maximum tool diameter without restriction of adjacent positions: 72 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool weight: 8 kg Maximum tilting moment: 12 Nm Workpiece area: Maximum pallet load: 700 kg Maximum table load: 800 kg Maximum workpiece diameter: 800 mm Maximum workpiece height: 900 mm Pallet system: Automatic pallet changer Pallet size: 630 x 630 mm 2 pallets Coolant and media supply: High-pressure internal coolant system: 80 bar Minimum quantity lubrication: Lubrix V7 Switching between MMS and coolant Pressure booster: 10 bar Compressed air storage tank: 20 liters Chip conveyor Coolant and filter system Electrical connection data: Connection voltage: 3/PE 400 V AC Frequency: 50 Hz Rated current: 55 A Fuse rating: 160 A Power requirement: at least approx. 42 kVA Required air pressure: approx. 5 bar Machine weight: Approx. 24,000 kg including pallet changer Equipment: 5-axis simultaneous machining Siemens SINUMERIK 840D sl Motor spindle with 16,000 rpm HSK-A63 tool interface Automatic pallet changer Pallets 630 x 630 mm Tool magazine with 60 positions High-pressure internal cooling 80 bar Minimum quantity lubrication Lubrix V7 Pressure booster Compressed air storage tank Chip conveyor Coolant and filter system

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production – primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle travel: 800 mm Travel ranges: x: 900 mm y: 900 mm z: 1200 mm Clamping area: 1000 x 1200 mm Max. workpiece weight: 4000 kg Accuracy: 0.02 mm Please note: The machine has already been disassembled and is ready for loading onto a truck in an open area. Various tool holders and clamping devices are included as accessories. If you are interested, we can send you photos. Important conditions: Please note that the sale of this machine is only possible under the following conditions: Iedpfoxbn A Tex Aatjif • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Sales / transfer conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your reply so that we can discuss the further details directly.

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Iiedpfx Asyr Dfaoatjf Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Isdpfx Aasyxnuajtjif

Condition: ready for operation (used), L & Z Lathe / WEILER CONDOR VS 2 with new 3-axis digital readout from training workshop - 3-axis digital readout "NEW" - Center height: 165 mm - Swing diameter over bed: 330 mm - Center distance: 800 mm - Speed range: 28 - 2800 rpm - Automatic longitudinal / cross feeds - Spindle bore - Tailstock with center - Collets / quick-clamping device incl. 25 collets - 3-jaw chuck Röhm 200 mm with reversible jaws - Multifix / new with insert - Work light - Emergency stop - Bed stop - Machine feet - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900 kg Ijdpfjy Ral Iox Aatjif Subject to errors and input mistakes.

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Iedpfx Aaow Nacvjtoif Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: used, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Iodpfoyhymisx Aatsif DMS RL2590 Rotator Bucket / incl. Rotator / MS01 Coupler / NEW unit / in stock & immediately available Price: €4,190.00 net / €4,986.10 gross - Weight: 101 kg - Cutting width: 900 mm - Volume: 100 l - Max. output rotation speed: 9–10 rpm - Max. torque: 1,337 Nm - Recommended oil flow for rotation: 12–16 l/min - Max. operating pressure (rotation): 210 bar - Excavator class: 1 – 2.5 t Optional: - MS01 Coupler: €330.00 net - MS03 Coupler: €560.00 net We have a very large selection of various DMS products in stock and available for immediate delivery! Mr. Herden is happy to assist you (by phone). Upon request, we are pleased to provide you with a financing offer. We are an official sales and service partner for the following brands: - DMS - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and prior sale excepted! = Additional Information = New: Yes Intended use: Construction Unladen weight: 101 kg Contact Marius Herden for more information.