Used Langheinz Chilled Water for sale (7,758)

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pjdpfjw Uf Ihex Akisgu Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Pjdpew Uvdgjfx Akiegu Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit

Year of construction: 2011, operating hours: 8 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S071361/01, USED GODWIN 12 INCH PUMP MODEL : CD300M SERIAL : S071361/01 ENGING MODEL : CATERPILALR C9 ENGINE SERIAL NO : JSC22260 Pgedpfxexiwawj Akiju YEAR : 2011 HOUR : 7.8hrs

Year of construction: 2007, condition: good (used), Filtration unit consists of: water tank, gravel filter, pressure pump, activated carbon filter. System for insulating glass production line. Psdpfjw I Hgrjx Akijgu Width: 2000 mm / water tank 2100 mm. Height: 2200 mm / water tank 1700 mm. Depth: 600 mm / water tank 750 mm. Weight: approx. 250 kg / water tank: approx. 100 kg.

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Pgedpfxjyizqne Akiju Heating capacity: 6 MW Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer

Condition: used, 100,000 litre – underground tank - double-walled - cleaned - 2 manholes - slight traces of dismantling present - internal coating possible upon request - Approved for service and firefighting water Loading and transport can be offered! Podpfoxcgg Tox Akisgu Only serious and credible enquiries with the following details will be answered: Name, e-mail address and telephone number.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. Pgjdjua Tbwopfx Akiou SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, functionality: fully functional, New Brunswick Scientific G76 Water Bath Shaker. New Brunswick Scientific water bath shakers are equipped with a one-piece seamless water bath of deep-drawn stainless steel which is easy to keep clean. Model G76 is equipped with a triple-eccentric Gyrotory drive which is precision-machined and stabilized to rotate the shaker platform in a 13 mm diameter circular orbit. The gyrotory shaker is engineered to handle any workload from 25 mm test tubes to 1,000 mL flasks with equal ease. Features: Podpsupvtiofx Akiegu Reliable, Sophisticated and Convenient Platinum RTD Sensor Precise Temperature Feedback Regulation Triple-Eccentric Gyrotory Drive Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2025, operating hours: 400 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Pgodpevgrpxefx Akiju GWARANCJA PRODUCENTA SILNIK DEUTZ TCD 6.1 ST5 140 KW DOSTĘPNY OD ZARAZ

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Podpfxsvmz Ide Akiogu Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Pjdpsvw A T Nefx Akijgu Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: used, Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump Pedpfx Ajd Ergpokiogu -Connection: volts -Power kW - Delivery rate: 100 l / min -Dimensions: O 250 / H330 mm -Weight: 20 kg

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 25,000-liter storage tank for storing water and wastewater, as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer's certificate according to DIN standard and a type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 8,390 mm, Diameter: approx. 2,000 mm, Weight: approx. 4,500 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-coupling connector according to DIN can be offered as an additional option. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer cost-effective delivery on request. Inspections of our systems are possible at any time. Additional tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free of charge for loading. Delivery can be offered at a reasonable additional cost. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, Podpoc Nkyzefx Akiegu from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 1995, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company in accordance with the German Water Resources Act (WHG) Dear Sir or Madam, we offer a 50,000-liter storage tank for the storage of water and wastewater as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer’s certificate according to DIN standard and type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 10,900 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-release coupling according to DIN standard can also be offered. Of course, you can also participate in the design of your tank system! All our systems are extensively inspected and checked by selected employees in our company. We also offer a cost-effective delivery service on request. You are welcome to visit our facilities at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please feel free to call us – one of our experienced employees will be happy to advise you. General information: Pgedpoc Nkzgefx Akisu All offers are valid ex works Warstein, free loading. Delivery can be offered at a reasonable cost for an additional charge. Delivery time = immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as an approved specialist company in accordance with the German Water Resources Act (WHG), professionally empty, clean, dismantle and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2018, condition: new, Condensate treatment: new Kaeser oil/water separator CF 38 Technical data: max. flow rate for oil-cooled screw compressors and oil types in climate zone 2 (= Central & Southern Europe, parts of South America, North Africa): 22.5 m³/min for the oil types S-460, MOL, MOH, PAO, VCL 29.3 m³/min for the oil type VDL Tank size (volume): 115.5 l Filling volume: 84.3 l Condensate inlet connection: 3 x DN 13; 1 x DN 25 Pgedpfx Akodmqy Ijisu Water drain connection: DN 40 Oil drain connection: DN 40 Oil collection container: 2 x 10 l Weight: 36.5 kg Dimensions W x D x H: 530 x 764 x 1090

Year of construction: 2006, condition: like new (used), Details on request Pedpofla Emefx Akiegu

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Psdpfx Asrm Ilfokiogu Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: Pgjdpfx Asi U Dxuokieu 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) Pjdpfjg Ey T Eex Akiogu -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Inspection is possible at any time by prior appointment. We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Pgsdohh Sprspfx Akieu

Condition: refurbished (used), 80 m³ / 80,000 liter fire water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight: approx. 13,250 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. New or used, immediately available! The container has been emptied, cleaned, completely overhauled, and inspected for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the form B design without a gauging port - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Externally coated with bitumen for protection - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Psdpehh Sr Uefx Akisgu Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. Inspection is possible at any time by prior appointment. If you require further information, please call us or send us an email to b.barth(at)barth-tank.de We can also offer trade-in and purchase options for tanks/containers of all kinds; please do not hesitate to contact us. We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), 150 m³ / 150,000 l fire water tank according to DIN 14230 Tank volume: 150,000 liters / 150 m³ Length: approx. 22,500 mm Diameter: approx. 3,000 mm Weight: approx. 32,000 kg Material: Steel grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked on and driven over (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. Available new or used, ready for immediate delivery! The container has been emptied, cleaned, fully overhauled, and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in design B without a level indicator. - Vent flange stub with a cap, total length approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. - Externally coated with bitumen for protection. - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion). Pedpfx Akohh St Ioiogu - It is also possible to line the container with a plastic inner liner. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. An inspection is possible at any time after prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de. We can also accept and purchase tanks/containers of all types; please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Year of construction: 1996, condition: good (used), Offer: Drinking water treatment plant Water treatment plant 120 cubic meters/hour Year of manufacture: 1996 Fully functional Housed in a 6m container Control system and pumps included. Podpfxohr D Hne Akijgu Previously used to supply a container village.

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator Podpfx Akev Aip Uoijgu -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Pgedpfx Ajtmp T Dekiju Possibility to equip the machine with additional accessories for an extra charge.