High-pressure water jet

Hammelmann KAMAT FALCH,URACA-NLB-DENJET AQUAJET 144

Condition: new, PAK-1 Unbalance Measuring Unit is designed to modernize your balancing machine. A balancing machine has a long mechanical life, but prolonged use leads to gradual failure of electronics and measuring instruments, causing problems with spare parts and lack of technical support. Minimize downtime and ensure the reliability of your balancing machine by upgrading it with a new advanced measuring unit. The PAK-1 unbalance measuring unit works in all balancing machines of most existing designs and manufacturers. Confidence in results and ease of use: Easy to set up and work with, our devices do not require any special theoretical knowledge. Wide range of functions for your balancing machine: The use of modern microprocessor technology and many years of experience of our developers allows us to implement functions that were previously unavailable to other manufacturers. Your machine complies with ISO 21940: Balancing machines equipped with the PAK-1 unbalance measuring unit fully meet the precision requirements of modern standards. HIGHLIGHTS • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. Iaedpeq Ttn Defx Amieu INCLUDES: 1) vibration sensor signal processing unit, 2) fanless industrial computer with touch screen, 3) new vibration and speed sensors, 4) metal protected cable set. SEQUENCE OF WORKS for modernization of the measuring unit - Replacement of the existing measuring system with the balancing complex PAK-1 based on an industrial computer; - Installation of new vibration sensors and rotor speed sensor - Replacement of all connecting cables; - Adjustment of the measuring unit on the balancing machine; - Training of personnel with skills to operate the machine. VTM GROUP offers to upgrade your balancing machine. We repair and modernise various old balancing machines of all types from all manufacturers. It's cost effective. An alternative to buying a new balancing machine in 95% of cases. Urgent. Work can be done at customer site within 1-2 days. New components for modernization of your machine: • Installation of new measuring system and vibration and speed sensors. • Installation of new electrical equipment • Manufacturing or repair of the rotation drive • Manufacturing of new rollers Every business is different. Let's discuss your task. We can offer a solution for any balancing machine. Please contact us to get the best offer! 👇

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Isdslxyhfepfx Amijau essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Iajdpfxeh Invrj Amiou Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Speed of the working disc 45/70/90/140 rpm Main drive performance 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with control panel Full-fledged lapping machine, conventional control

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Ijdpsxyh Hvsfx Amisau Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min

Condition: used, Year of construction: 2022, operating hours: 45 h, functionality: fully functional, operating pressure: 3,000 bar, fuel: electricity, Demonstration machine, Machine available immediately. Only used for demonstrations. Only 45 hours on the hour meter. Technical condition: like new. Complete set: Iaedpfx Amjxwb Egeisu Robot + radio remote control + control unit + support winches. Operates with a 200 kW high-pressure pump (recommended by the manufacturer, but can be configured differently). Worldwide shipping available. Similar to, but better than: Vertidrive, Falch, Kamat, Robot PlusPlus. SPIDERJET® surface preparation devices — Whether cleaning, paint stripping, or de-coating large steel structures such as ships, tanks, or vessels, the SPIDERJET® surface preparation equipment delivers fast and clean results and, thanks to compact versions, can be maneuvered even through the narrowest areas. Minimal setup times ensure rapid deployment, and the use of high-pressure water without additives or chemicals protects the environment. High coverage rates and semi-automatic operation reduce working time and costs while increasing work safety.

Condition: excellent (used), Well-maintained Hammelmann HDP 42, 970 bar and 16.5 litres, year of manufacture 2012. Ijdpfxjxgvhnj Amijau

Year of construction: 1991, condition: not inspected (used), Uraca 624 pump Isdpfx Aoh Tyd Hemijau

Condition: good (used), Year of construction: 2009, pressure: 330 bar, operating pressure: 330 bar, Hammelmann HDP 77 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Delivery rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Ijdpfsrzuwmex Amisau Year of construction: 2009 Condition: In good used condition.

Condition: good (used), Heavy duty high pressure washer. Iaedpjh Rkilofx Amiou Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available.

Condition: good (used), Year of construction: 1980, Table size 1300 x 355 mm Tool holder, vertical + horizontal ISO 50 Travel X-axis 1000 mm Y-axis 350 mm Z-axis 450 mm Vertical milling head, swiveling R + L Quill stroke 100 mm Speed range 22.4 – 1400 rpm Feed range 6.3 – 630 mm/min Rapid traverse 2.5 m/min Drive power approx. 5 kW Space requirement L x W x H 1900 x 1800 x 2100 mm Weight 3200 kg Accessories / Special features: • 3-axis digital display, make FAGOR • Swiveling vertical milling head (R-L) with quill adjustment 100 mm • Vertical and horizontal milling spindle ISO 50 • Milling spindle vertical + horizontal • Large Clamping table 1350 x 350 mm • Feed and rapid traverse in all axes • Wide, stable guideways • Central lubrication • Swiveling control panel • Coolant system • EMERGENCY STOP switch Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Iasdovu Dv Tspfx Amisu