Used Hidrobrasil Hydraulic 20 T Concrete Press for sale (94,570)

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Hedpfx Aqey S Rqwepjfh Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: good (used), Year of construction: 2014, operating hours: 5,321 h, load capacity: 2,000 kg, fuel type: electric, mileage: 5,321 km, This electric ride-on pallet truck from the German brand Linde is from 2014 and is in good condition; Capacity is 2,000 kg; 5,312 operating hours; Fork length 1,150 mm; Battery equipped with automatic filling system and external charger; Maintained by an authorized LINDE DEALER. Watch the video on YouTube. Hjdpfey Sm Npsx Aqpsfh

Condition: used, machine/vehicle number: 7033, Year of construction: 1984, operating hours: 21,102 h, 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Traglast. 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Hjdpszcbmiofx Aqpefh Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Hfedpfx Aqozcv Uhopoh Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Hfedpfezcv Ubox Aqpoh Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Hydraulic double-column straightening press Dunkes Hedpfx Aozcv T Rsqpjfh Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1992, Available immediately from our location: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Machine complies with the latest UVV regulations Pressing force 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive power 7.5 kW Weight 6 tons 4 guide pins of the upper ram are broken. These need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Hsdpezcv Twofx Aqpsfh Price: EUR 3,000.00 plus VAT, ex works.

Condition: like new (used), Year of construction: 2016, operating hours: 930 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer & model: LINDE T 20 * EX * Proplan 3GD / Zone 2 - 22 ID: 25050.8953 Category: Demo Forks: 1150 x 560 mm Load capacity: 2,000 kg Year: 2016 Operating hours: 930 hours Battery: Completely NEW * 24v / 230ah * Year 2025 Hedpfezafz Ssx Aqpsfh Options: Special construction with hydraulically tiltable forks! Ideal for emptying IBC containers * EX * Proplan! System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat 3D (approved for ZONE 22 – dust) Gas group = IIIB Temperature class = T 135°C

Condition: like new (used), Year of construction: 2016, operating hours: 708 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 & 22 ID: 25070.8428 Category: Demo Forks: 1150 x 560 mm Capacity: 2000 kg Year: 2016 Hours: 708 hours Battery: Completely NEW * 24v / 230Ah * Year 2025 Hedpfx Aszafxweqpsfh Options: Special build! With hydraulically tilting forks! Ideal for example for emptying IBCs * EX * Proplan! System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temp class = T4 Type = Cat 3D (approved for ZONE 22 – Dust) Dust group = IIIB Temp class = T 135°C

Condition: like new (used), Year of construction: 2016, operating hours: 1,176 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 & 22 ID: 25070.8807 Category: Demo Forks: 1150 x 560 mm Capacity: 2000 kg Year: 2016 Hours: 1176 hours Battery: Completely NEW * 24V / 230Ah * Year 2025 Options: Special build! With hydraulically tilting forks! For example, for emptying IBCs *EX* Proplan! System = ATEX 14 Proplan 3002 X Hfjdpjzafxqefx Aqpoh Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat 3D (approved for ZONE 22 – dust) Gas group = IIIB Temperature class = T 135°C

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Hedpfx Aqezcxn Dspofh Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Colour: Grey Empty weight: 800 kg Price: On request Hfedpfxoxan Ute Aqpjh - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons -Stroke: 110mm -Piston rod: Ø 80 mm -Shots: inside 145 x 47 mm, see photos Hodpfxelxulce Aqpofh -Number: 1x cylinder available -Price per piece -Dimensions: 810/155/H410 mm -Weight: 66 kg/pc.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 80 t, stroke length: 350 mm, table width: 1,400 mm, table length: 840 mm, oil tank capacity: 230 l, total width: 1,600 mm, total height: 3,600 mm, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, NEW EXNER hydraulic testing press, type PG 80 Number of press cylinders: 2 Hedjza Em Uepfx Aqpefh Nominal force (adjustable): 2 x 400 kN Retraction force: 2 x 150 kN Ram stroke: 350 mm Ram width: 1400 mm Ram depth: 840 mm Guide length: 750 mm Ram speed, load up to 100%: approx. 0-10 mm/s Ram speed, retraction: approx. 0-20 mm/s T-slots, table/ram according to DIN 650 = 22 mm Installation height – stroke at top: 600 mm Table width: 1400 mm Table depth: 840 mm Column clearance, front: 1000 mm Column clearance, side: 600 mm Table height above floor: 1100 mm Nitrodyne control / retraction, spring force to be compensated under spring tools: max. 150 kN Accuracy: Maximum deviation of plan parallelism from the ram surface to the table surface (from right to left) in free travel (absolute) < 0.05 mm in eccentric loading with maximum force (absolute) < 0.10 mm Table/ram deflection at nominal force and 2/3 surface coverage: 0.10 mm Starting accuracy U.T. without mechanical depth stop: ± 0.05 mm Optionally, a servo roll feed can be offered and installed.

Condition: used, Punching force: 200 kN Thread, for example a 13 mm hole in 12 mm steel Viewfinder via handwheel Hfjdpfxjrmudgo Aqpeh Assortment of tools is included in the price

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Hfodpfsy R Nnfex Aqpoh Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Hjdokvmi Sspfx Aqpjfh Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Hfedpowp Nv Hofx Aqpsh Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Table Length: 1600mm Length: 3400mm Width: 3400mm Height: 3500mm Hfsdswyuqkjpfx Aqpsh Weight: 19000kg

Condition: excellent (used), Year of construction: 2006, Table size 3500 x 2500 mm Siemens Simatic OP7 controller Max. work load 80 Ton Hodpsxam Sdsfx Aqpofh New price 1 Mil EUR Working force up to 250 Bar Power 30 kW Distance between column:3700mm Hight under roof: 2650mm Table Length: 3500mm Ram stroke: 2100mm Approche speed: 80mm/min. Working speed: 8mm/min. Return speed: 50mm/min. Length: 7800mm Width: 5500mm Height: 6510mm Weight: 135000kg

Year of construction: 1980, condition: used, strip width: max. 2.000 mm strip thickness: 0,4 - 4 mm coil weight: 20 t Hfjdpfockanpjx Aqpjh cone Ø: 300 - 1.000 mm

Year of construction: 2017, condition: excellent (used), strip width: 800 - 2.400 mm strip thickness: max. 3,5 mm coil weight: 20 t Hsdpfxsg Ewanj Aqpsfh mandrel Ø: 600 mm

Year of construction: 2026, condition: new, functionality: fully functional, • A vertical guillotine shear with a 3 mm or 6 mm steel cutting capacity on a 3 m width, with a motorized back gauge, an optical system for contour cutting, and an optional pneumatic sheet support. • A 50 or 100 T press brake with a 3 m distance between uprights, with 3 digitized axes (X, the back gauge, and synchronization of the left Y1 and right Y2 cylinders). A CYBELEC touch-screen CNC control with digital or graphical programming. Features: With minimal floor space in the workshop, you have the equivalent of 2 high-end conventional machines: • A vertical guillotine shear equipped with a motorized back gauge (700 mm length), an optical system for contour cutting, proportional clamping relative to the cutting force, 2 reversible 4-sided blades, and an optional pneumatic sheet support. • A press brake equipped with a motorized back gauge (700 mm length) and fully electronic angle management with 2 digital rulers (synchronization of the left Y1 and right Y2 cylinders with force management), allowing bending either in a single stroke or in the air with a positioning accuracy of 0.04 mm. - Distance between uprights = 3200 mm - Unlimited bending capability, as there is no interference with the gooseneck! - Direct angle programming + graphical programming with automatic calculation of the developed length and 2D bending simulation. - Automatic pressure control in real time. - A complete set of tooling with a 9-V die + gooseneck punches + adjustable punch holders. - A 2-year warranty. Available in several versions: - Cutting capacities: 3 or 6 mm steel - Cutting lengths: 1250 / 2040 / 3040 mm - Bending pressure: 50 and 100 T - Bending lengths: 1400 / 2200 / 3200 mm - Cybelec graphical CNC control, 3 axes. More than 1000 installations in Europe. Inquire now! With the COMBI and its 3 digitized axes X, Y1, Y2, you really have the equivalent of 2 excellent machines, with the added benefit of technology typically intended for industrial applications (Y1 Y2 synchronization). Since 2004, JC COLOMBO has been distributing the COMBI combined shear and press brake. With ideal capabilities for locksmithing and metalworking activities (3040 x 6 mm shear and 3200 x 75 T bending), the COMBI allows all companies that do not have space for 2 conventional machines to equip themselves and become fully self-sufficient and much more responsive to complete projects. Workshops with 100 m² and 2 employees have opted for the COMBI! Hfedpfezcyx Dex Aqpeh A 50 T version has also been specifically designed for the production of cladding for aluminum joinery companies. Furthermore, with equipment such as the automatic sheet support for the shear, the Y1 Y2 cylinder synchronization, and the direct angle setting program, the customer really has the equivalent of 2 excellent industrial-grade machines at a lower cost. To date, more than 600 professionals use the COMBI in France.

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Hfedpfowag Risx Aqpjh Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: new, Year of construction: 2024, functionality: fully functional, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Hedpfx Asvd Aavjqpjfh Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Throat Depth: 410 mm Table Height: 900 Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order SEAL AND SIGNATURE PROFORMA INVOICE Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany