Used König Kgn Ii for sale (2,234)

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of supply as per the photos. Ledpfx Abji Ecaysyoru

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A, part number E4809-045-086-A / 1911-1509-44-90, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as per photos. Lsdpsi Eca Dsfx Abyeru

Condition: used, Year of construction: 1992, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW Ledoudqb Aspfx Abyjru -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 2,938 mm, total height: 1,622 mm, total width: 888 mm, compressed air connection: 8 bar, air demand: 100 m³/h, roll width: 480 mm, air pressure: 6 bar, film width: 480 mm, product height (max.): 120 mm, We offer this Italian Pack ITALIAN PACK Perseus VAC II packaging machine in very good condition, manufactured in 2019. Parameter Typical value for Perseus VAC Machine dimensions approx. 2938 × 888 × 1622 mm Lrsdpoz Eci Hefx Abyeu Max. tray height 120 mm Film roll width max. 480 mm Roll diameter approx. 250 mm Required compressed air 6–8 bar Vacuum pump standard approx. 100 m³/h Performance approx. 5–15 cycles/min, depending on the process Length of the infeed zone approx. 1648 mm The machine has two tools and two GN 1/2 and GN 1/4 molds. If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, table length: 900 mm, table width: 300 mm, Travel distances: Travel – X: 500 mm Travel – Y: 350 mm Travel – Z: 400 mm Lodoznly Nepfx Abyoru Grinding wheel: 400 x 50 x 127 Table size: 900 x 300 mm Installation dimensions: approx. Width: 2500 Depth: 2000 Height: 2100

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Ledpfx Abjzcfhdsyeru

Condition: ready for operation (used), Year of construction: 1997, A 1.5-times linked IMA edge processing line with automatic Venjakob workpiece transfer is offered. Max. working width: 2500mm, transfer angle: 90°, distance between the workpiece edges: 6000mm. Control system: Siemens S5. Including peripheral equipment and conveying system. Required installation space: approx. 250-300m², overall dimensions X/Y: approx. 19000mm/13600mm. IMA. Operator PC: renewed in 2018. Inspection possible by appointment. Lodpozh Nh Rofx Abyjru

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Ledpfxsy Tav Eo Abyjru

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Ledpfx Ajzc Rdkebyoru

Condition: ready for operation (used), Year of construction: 1985, A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement. Lodpfjzf Nb Ssx Abyeru

Condition: ready for operation (used), Year of construction: 2013, A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Lrjdoxqgxrjpfx Abyeu

Year of construction: 1978, condition: ready for operation (used), Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible. Lrodpfoxtpq Njx Abyeu

Condition: ready for operation (used), Year of construction: 2024, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 105 mm, controller manufacturer: FANUC, controller model: i Series, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 2600Y II was manufactured in 2024. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a main spindle speed of 4,000 rpm and a turret with 12 tool stations. If you are looking to get high-quality turn-mill capabilities, consider the DN SOLUTIONS PUMA 2600Y II machine we have for sale. Contact us for further details. • 15" color touchscreen display • iHMI Easy Operating System (EZI & Machining Cycle) • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Number of axes: 4 (X, Z, Y, C) • Maximum turning diameter: 376 mm Lsdpfx Aszlqpqobyoru • Maximum turning length: 760 mm • Bar capacity: 81 mm • Main chuck size: 255 mm (10") • Hardened & ground hard jaws • Main spindle motor power: 22 / 15 kW • Built-in spindle design • C-axis functionality • Milling spindle power: 7.5 / 1.5 kW • Live tool speed: up to 10,000 rpm • Turret type: BMT65P • Number of tool stations: 12 • Automatic electric tool setter • Programmable live tailstock • MT5 live center • Coolant pump: 1.1 kW / 1.0 MPa / 20 L/min • Flood coolant for rotary tools • Coolant tank on right side • Thermal compensation structure • Chuck clamp confirmation • Bar feeder interface • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • 128 tool offset pairs • 8 work coordinate systems • Built-in transformer • Electrical line filter • 3-color signal tower (red / yellow / green) • Tool number display Additional equipment • Hinged belt chip conveyor (right side) • Belt-type oil skimmer • Parts catcher with collection box • Coolant gun • Air gun

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,148 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 650 mm, spindle motor power: 37,000 W, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, positioning accuracy: 0.008 mm, tool weight: 20,000 g, number of slots in tool magazine: 48, number of axes: 5, This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details. Technical Data • Machine Type: Twin-Spindle Horizontal Machining Center • Control Unit: Siemens SINUMERIK 840D sl • Operator Panel: Siemens OP15T with integrated TCU • ECO Mode • Remote Diagnostics (eWON Router) • PROFIBUS Interface for Automatic Workpiece Loading • Signal Tower (3-color LED) Travels • X-Axis Travel: 750 mm • Y-Axis Travel: 660 mm • Z1-Axis Travel: 650 mm • Z2-Axis Travel: 650 mm Rapid Traverse • X-Axis: 60 m/min • Y-Axis: 60 m/min • Z1/Z2 Axes: 90 m/min Axis Performance • X-Axis Acceleration: 6 m/s² • Y-Axis Acceleration: 6 m/s² • Z1/Z2 Axis Acceleration: 9 m/s² • Feed Force X: 15,000 N • Feed Force Y: 15,000 N • Feed Force Z1/Z2: 10,000 N • Positioning Accuracy: 8 µm Spindle • Number of Spindles: 2 • Precision Motor Spindles • Tool Holder: HSK-A63 (DIN 69893-1) • Spindle Speed: 12,000 rpm • Spindle Power: 37 kW (40% ED) • Spindle Torque: 85 Nm (40% ED) • Maximum Torque: 100 Nm • Direct Drive Axes / Swivel System • 2 NC B-Axes • 2 NC Rotary Axes (A-Axes) • Swivel Range: 0°–180° • Swivel Time (0°–180°): approx. 5 s Technology • Independent X, Y and Z Axes for both Spindles • Separate Direct Measuring System for each Axis • Independent Z-Axis Correction Range: 5 mm Tool Magazine • 96 Tool Stations (2 × 48) • Maximum Tool Length: 400 mm • Maximum Tool Diameter (Adjacent Pockets Occupied): 80 mm • Maximum Tool Diameter (Adjacent Pockets Free): 250 mm • Maximum Tool Weight: 20 kg Lubrication • Automatic Central Lubrication • 5-Channel Media Transfer (Oil or Air) Cooling / Coolant • 70 bar Through-Spindle Coolant • Coolant Tank Capacity: 2,300 l • Coolant Flow Rate: 400 l/min • High-Pressure Pump: 15 kW • Automatic Coolant Refill • Coolant Cleaning System • Water Cooling • Cooling Water Temperature: 22 °C • Cooling Water Flow Rate: 800 l/h Chip Management • Scraper-Type Chip Conveyor • Chip Conveyor Discharge Height: < 1,150 mm • Dry Machining Ready • MMS (Minimum Quantity Lubrication) Compatible Electrical Data • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V DC • Connected Load: 150 kW Additional Features • Automatic Workpiece Loading Interface • Automatic Tool Changer • Closed Machine Enclosure • Machine Lighting • Pneumatic Equipment • Energy Monitoring System • Automatic Media Connections • Modular Machine Design Additional Information • Motor Spindle 11 replaced in Week 19/2024 • Motor Spindle 12 replaced in Week 24/2023 Technical Specification Lsdpfxezqr Skj Abysru Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle No Driven Tools No

Condition: good (used), Level limit switch, level measuring device, sensor, switch, level transmitter, limit level detector, limit switch, level switch, level sensor -Manufacturer: Endress+Hauser, boundary level detector set, unused, original packaging -Type: Soliphant II FTM30-A2AA1 -Quantity: 1 detector available Ledpfozmq Nysx Abyoru -Dimensions: 360/125/105 mm -Weight: 1.6 kg

Condition: excellent (used), functionality: fully functional, EKOCHEM Underwater Granulation Head RW-440-II - Water Ring Granulation - WRG The EKOCHEM RW-440-II is a high-performance underwater granulation head for processing a wide variety of polymer materials. Its robust construction, pneumatic knife pressure system, and closed water circuit ensure reliable and economical operation, even with high throughput rates. Lrjdpfsznu S Uex Abyju A suitable centrifuge for drying the granules is already installed together with the granulation unit. Technical Data * Model: RW-440-II * Throughput: 600–1,500 kg/h * Number of granulation knives: 4 * Cutting knife speed: 2,910 rpm * Cutting knife drive power: 3.0 kW * Heating zone power: 3.8 kW * Max. operating temperature: 280 °C * Max. permissible melt pressure: 120 bar Features / Advantages * Compact and robust design * Pneumatic knife pressure system * Precise knife centering thanks to linearly guided knife holder * Fast and easy knife change * Free access to the interior for maintenance work * Short setup and maintenance times * Suitable for a wide range of polymer materials * Granule size can be individually adjusted The system is in very good condition, fully functional, and immediately available from stock. An inspection can be arranged at any time.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 120J434, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, controller model: FANUC 18 M, table width: 550 mm, table length: 1,200 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Table size 1200 x 550 mm Longitudinal travel 1020 mm Cross travel 610 mm Vertical travel 560 mm Max. distance spindle to table 710 mm Max. load on table 1.000 Kg Ljdpfx Abeymmh Toyoru Spindle speeds 10.000 rpm Rapid movement 24 m/min Tool change 24 pcs Spindle taper ISA 40 Control FANUC 18 M Cycle hours 7100 Timer

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Lrodpjzil S Iefx Abyju Supply voltage: 380 V, 50 Hz

Condition: used, mileage: 150,023 km, power: 105 kW (142.76 HP), first registration: 03/2018, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro6, total length: 6,961 mm, total width: 1,993 mm, total height: 2,612 mm, loading space length: 4,330 mm, loading space width: 1,780 mm, loading space height: 1,930 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Mercedes-Benz Sprinter II Box Van 314 CDI 4x2 !!! 6 identical Sprinters in stock !!! Wheelbase: 4325 mm Payload: 1144 kg Color: Silver Cargo area: Length: 4.33 m Width: 1.78 m Height: 1.93 m Special equipment: Audio system Audio 15 (radio with color display), Outside temperature display, Roof control unit with reading light (driver/passenger side), Rear door (opening angle 270 degrees), Wooden floor in the cargo area, Metallic paint, Navigation system Becker MAP Pilot, Parktronic system (PTS), Rear stabilizer, Reinforced front stabilizer, Rear door step, Interior paneling in the cargo/passenger compartment: plastic, Auxiliary heater (air) electric, Generator 250 A Additional equipment: 3rd brake light, Adaptive brake light, Airbag (driver side), Washer fluid level indicator, Exterior mirrors, electrically adjustable and heated, both sides, Exterior mirrors with integrated turn signal, Battery 74 Ah, Braking system with ABS+ASR, Roof lining in the cab, Lockable glove compartment, Body/superstructure: box van with high roof, Child safety lock, Fuel tank: main tank 75 liters, Full-height cargo area partition, Load securing/tie-down points, Headlight range adjustment, Model update, Engine 2.1 L - 105 kW CDI CAT, Wheelbase 4325 mm, Tire repair kit with compressor, Low emissions according to Euro 6 emission standard, Sliding door, cargo/passenger compartment, right side, Lrsdpjzr Stdefx Abysu Safety belt system with warning system (driver side), Seat cover/upholstery: fabric Lima, Seats in the cab: adjustable passenger seat, Service interval display Assyst, Heat-absorbing glass, Permissible total weight 3.50 t Cargo area with shelving system We would also be happy to assist you with financing/leasing through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: ready for operation (used), Description: Lrsdpfszpzhrox Abysu Geiger MiniServo II 1.5, a servo-motorized demolding device or sprue picker, used on an ARBURG 270 S injection molding machine. The device is designed to precisely and quickly remove sprues or small molded parts from the mold and place them aside. Swivel axis (A): 0-105° Demolding stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Servo-motorized drive of the main axes Fail-safe mechanism (Y): electromechanical Sliding console Gripper F Rotary module B (pneumatic) with stop 1 compressed air circuit for gripper 1 compressed air circuit for rotary module B 1 vacuum circuit with monitoring Gebtkoy Tn Rdsqqtioiu Programming assistant for programming standard demolding sequences with 1 pressure and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable 5 m Deposition area behind and in front of the machine RAL 9016 white Additional control HT7, vacuum circuit, and consoles Input voltage: 230 V Since I was unable to observe the device in operation, I cannot provide a guarantee. According to maintenance records, it is in good working order, but it stalled once or twice a week. Switching the main switch off and on again would resolve the issue. Therefore, it is not suitable for continuous operation. I am selling it as a spare parts unit.

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Lredpfjzy Upkjx Abyeu Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, mileage: 280,000 km, power: 120 kW (163.15 HP), first registration: 04/2018, fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 15 m³, loading space length: 4,266 mm, loading space width: 1,860 mm, loading space height: 1,890 mm, Year of construction: 2018, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, soot filter, Mercedes-Benz Sprinter II refrigerated box van, Carrier, navigation system, Euro 6 For inquiries: 0926788 * Condition: very good * Engine power: 120 kW * Engine displacement: 2,143 cc * ABS + ASR * ESP * Audio system: Audio 15 radio with color display * Digital tachograph * Navigation system: Becker MAP Pilot * Seats in the cab: double passenger seat * Driver's seat: comfort seat Lodjzz Dr Rjpfx Abyjru * Reinforced front stabilizer bar * Fleece battery 95 Ah * Reinforced front axle * Electrically adjustable and heated exterior mirrors * Wheelbase: 4325 mm * Emission standard: Euro 6 Body/superstructure: refrigerated box van Refrigeration unit: Carrier - Xarios 350 Cargo space length: 4,266 mm Cargo space width: 1,860 mm Cargo space height: 1,890 mm Tires: Front axle: 205 / 75 R 16, 30% tread Rear axle: 205 / 75 R 16, 30% tread ----Price: 19,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale are subject to change.

Condition: good (used), Year of construction: 1977, HERA UM2 folding machine Lsdpfjzupxcsx Abyjru Brand: HERA Year of manufacture: 1977 Type: UM 2 Control type: Conventional Sheet thickness (mm): 2 mm Working width (mm): 3000 mm Machine weight (kg): 3000 kg Length (mm): 3820 mm Width (mm): 800 mm Height (mm): 1850 mm

Year of construction: 2001, condition: good (used), machine/vehicle number: KBK3, DEMAG KBK crane headliner crane runway dimensions approx. 20 x 9 m Track length can be combined variably !!! Any size is possible. Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK2 rails, bridge made from KBK3 Mounting height variable, chain length approx. 4 m The system is delivered complete: -KBK rails, rail connectors - Undercarriages, end plates, cable towing, holders/hangers, etc Lrsdpjhvpzhefx Abysu including bridge with Demag 0.25 to chain hoist Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items! Dispatch by forwarding agent, please ask for postal code. Please ask for other dimensions or shipping prices, we will make you a non-binding offer immediately!

Year of construction: 2006, condition: good (used), machine/vehicle number: WIZ, Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails External dimensions of steel construction (space required) 13.2 x 5.5m Height of steel construction 4.85 m, UK steel construction 4.65 m UK runway crane 4.4m, UK bridge 4m, hook height 3.8m Support spacing 4 + 4 + 4.9m The system is delivered complete: KBK rails, rail connectors Undercarriages, end plates, drag cables, holders/hangers, etc + complete steel construction (HEA180) Ledeiwdaqepfx Abyoru incl. Demag DC 500KG chain hoist Crane is dismantled and available immediately Item location is 75053 Gondelsheim Good condition, see pictures (contaminated by oil mist - can be easily cleaned) Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items!