Used Fliegl Log Transport for sale (18,121)

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 R22,5", Further information Chassis Saddle Container Welded fine-grained steel construction, fifth-wheel plate with replaceable 2 kingpins and 2 kingpin positions Front locking on tipping ram support frame with guide wedges on both sides, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking cross member, 2-fold for locking 1 x 20 foot container (Note! low fifth wheel load for 20 foot containers) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Free support foot corner dimension or free swing radius to the rear approx. 1850 mm 2 wheel chocks with holder Half-shell mudguard with anti-spray flaps according to EG Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK Screw socket, fixed part, NW 48 mm. (without hose connection) Hydraulic actuation via truck power take-off Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension 3 SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons Gross train weight Air suspension. Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Gbsdsi Ri Euopfx Afksn Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck instal. calibrated scales) Wheels and tires 6 385/65 R22.5 tires of the manufacturer's choice 6 steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Country of registration/ plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: used, Crane Hook/Pulley - lifting capacity 10 t - weight approx. 190 kg - pulleys Ø 500mm; width 58mm; rope groove 40mm - cargo hook length 420mm; hook opening 90mm; intake 110mm with safety device Gbsdpfeu Nvlgsx Afkjn Only one crane hook/pulley left on sale! *

Condition: used, 4 pieces telescopic crane carrier / price per crane carrier Part for sale as spare parts Gjdju Nvn Iopfx Afksbn Weight per telescopic arm = 0.8 to *

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage 1 x 45 ft with gooseneck tunnel and rear overhang Middle telescope, 2nd stage, front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45 ft with long gooseneck tunnel and angled corners Middle telescope as an interlocking central tube frame with pin lock with height adjustment at the rear and foldable center supports for containers without a tunnel Container guides at the front, pluggable and removable Plug-in adapter for front locking, for securing the container without tunnel from below, with holder when not in use Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) Rear extension mounted on rollers, with hand crank Gsdpfx Afoi Ri R Sskjbn 24 tons, 2-speed support legs, single-sided operation Rear underrun protection, extendable for 45 ft containers Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured, reducing tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting assist, activation via 3x brakes (starting assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system, colored line routing for easy servicing Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Caution: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note: in certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total towing length of 16,500 mm is exceeded! The rear underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Customized Transport Solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Front locking on tipping cylinder support with bilateral wedge inserts, rear locking on continuous rotating shaft with return spring Container attachments: Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container. Adjustment via central telescope as interlocking central tube frame with bolt locking 24 tons, 2-stage support wind, single-sided operation, with straight lower part, without thrust compensation Free support leg angle or free pivoting radius to the rear approx. 1850 mm 2 chock blocks with holder Semi-shell fenders with anti-splash flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons total weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab, truck must be suitably prepared, no truck installation. Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable additional LED work light at the rear, switched via reversing light Country of registration/ signs Gbedpfx Aoi Ri Avefkon Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,860 kg, maximum load weight: 33,140 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, saddle, container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage 1 x 45 ft with gooseneck tunnel and rear overload Middle telescope, 2nd stage, front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45 ft with long gooseneck tunnel and angled corners Middle telescope as an interlocking central tube frame with pin locking without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connecting plate for electrical, air, and brake connections Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support winch, single-sided operation Retractable underrun protection for 45 ft containers Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured, reducing tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons total vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, actuation 3x brake Brake system 2-line pneumatic brake system, color-coded lines for easy servicing Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 keyed coupling heads at the front, without connection cable EBS, electronic brake system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units which ensure the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, 4 x 3-chamber lights + 1 round reversing light and + 1 round rear fog light, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin keyed sockets at the front, without connection cable Operating instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear of the vehicle and the total vehicle length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Gsdpfx Aoi Ri E Aefksbn Approval / signs Germany Test approval according to EC 2007/46 24/7 service hotline prepared for license plate holder, single-row Warning sign according to ECE - 70 Contour marking

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, saddle, and container Fine-grained steel welded structure, saddle plate with 2 interchangeable kingpin and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush at the rear Middle telescopic extension, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescopic extension, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel and overloaded towards the rear. Middle telescopic extension as an interlocking central tube frame with pin lock with height adjustment at the rear and foldable center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension on roller bearings, with hand crank 24 tons, 2-speed support winch, one-sided operation Underrun protection extendable for 45 ft containers Half-shell mudguards with anti-splash flaps according to EG Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Gbjdei Ri Exopfx Afkjn Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axle offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain tractor units, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame, front section + rear extension hot-dip galvanized Rear area DB 7350 Novagrau - 10-year warranty against rusting or hot-dip galvanized - 15-year warranty against rusting

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 interchangeable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support 2 chocks with holder Aluminum side guard Galvanized steel underrun protection Half-shell fenders with anti-spray flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the screen in the driver's cab, the truck must be suitably prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Gbsdpfxoi Riv No Afksn Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! With certain tractor units, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched on via the reversing light Operating instructions Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with Dekra approval and certificate (according to §13 EG - FGV) prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10 years guarantee against rust or hot-dip galvanized - 15 years guarantee against rust Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, saddle, and container Fine-grained steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush at the rear; note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and overhang to the rear Without height adjustment at the rear and without folding center supports; transport of containers without a tunnel is not possible. Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use. Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support legs, single-sided operation 2 support wedges with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Gjdpfsi Ri Eqox Afkebn Half-shell fenders included With anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total weight Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist; activated by 3x brake (starting assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded lines for easy maintenance 200 spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the cab; truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! With certain tractor units, false diagnoses may occur, although the function is present) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear of the vehicle and the total length of the combination of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration/signs Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for license plate holder, single-row 390 contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Support legs black coated

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: Gbsdpfxoi Rizue Afken 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guides at the front, pluggable and removable Plug-in adapter for front locking, to secure containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x brakes (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving stability system Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab; truck must be correspondingly prepared Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin fail-safe sockets at the front Operating instructions Special permit required if the overall length of the combination exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear of the vehicle and the overall length of the combination of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Gbsdpfx Afoi Ri Ayoken Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with 2 interchangeable kingpins Container mounts: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload Transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Gbedpfx Asi Riwmefkon Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Semi-fender with anti-spray flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure on the EBS module, located externally. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau, 10-year guarantee against rust penetration Support legs black coated without pallet box paint Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. With additional holder at the rear Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Gbsdpfxozb Iu Ds Afkon Frame: Hot-dip galvanized including passivation or pa

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,840 kg, maximum load weight: 21,160 kg, overall weight: 26,000 kg, axle configuration: 2 axles, loading space length: 12,050 mm, loading space width: 2,550 mm, total length: 12,200 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, transport company Fine-grained steel welded construction, turntable with replaceable 2" kingpin, reinforced mounting point for "gallows" attachment, and with sturdy wear plates all around, attachment rail for aluminum ramps at the rear Outer frame slightly inclined, new design with "Load-Lock profile" for securing lashing straps, "patented Load-Lock cross" for securing lashing straps, in the cross member under the outer frame, 24-ton, two-speed support winch, single-sided operation, with straight lower part, without stroke compensation, free support foot angle or free swivel radius to the rear approx. 1920 mm, without supports, 2 shims with holder, aluminum side impact protection, steel under-run protection, quarter panel fenders in front of and behind each axle, without bull bar, spare wheel holder for 1 spare wheel, with wheel fastening kit, spare wheel, manufacturer same as standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock Axles + Suspension Drum brake axles, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, without steering, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded line routing for easy maintenance, spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve, vehicle stability system Gbsdpfx Afjzb Ikfeksn Wheels and tires 205/65 R17.5, manufacturer's choice for 8-ton axle load at 80 km/h, steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED work lights in a curved design (switched via reversing light), if technically possible, additional LED work light at the rear, switched via reversing light Floor Sieve-printed panels approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5600 kg Front wall / front corner posts 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in full volume design Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Please note: The images shown are archive images! The vehicle may still be in use! Further information: Fine-grained steel welded construction, front stop, adjustable lengthwise and foldable, pair of removable guide rollers, front and rear, Swap Guard – changeover body guide, in front of and behind each container lock, 4 container locks with robust outriggers for 20-foot changeover containers 7.15 and 7.45, turntable with robust ball bearing race, support wedges with holder, aluminum side impact protection, side impact protection positioned inwards for optimal clearance to the changeover body supports, steel underrun protection, shortened underrun protection for optimal clearance to the changeover body supports, lighting system mounted in a protected manner, quarter-shell fenders in the front and half-shell fenders in the rear, without impact protection, spare wheel holder in chassis design, plastic toolbox. Drawbar (L = 2,200 mm) with tested 40 mm drawbar eye, drawbar length, drawbar height adjustment via spring. Gbjdpoi Ri Dzsfx Afkjn SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. 2-line compressed air braking system, color-coded line routing for easy servicing, air reservoir 208 liters, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, EBS, electronic braking system with EBS connector at the front, with connecting cable. (Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!) with raise and lower valve, holding function in both the lower and raise position, brake release function via a button on the vehicle next to the raise and lower valve, to release the brake in the coupled state, EBS power supply must be ensured! 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole connector at the front, with connecting cable, additional LED work lights at the rear, switched via the reversing light, LED work light at the front in the center between the beams, shining towards the rear, switched via the reversing light. Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, ADR warning sign at the rear, foldable, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Please note: The images shown are archive images! The vehicle may still be in use!

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Please note: the images shown are archive images! The vehicle may be in use. Further information: Fine-grain steel welded construction, front stop, adjustable in length and foldable, pair of removable guide rollers, front and rear, pair of removable guide rollers, plus 4 container locking mechanisms with robust outriggers for 20-foot standard containers 7.15 and 7.45, turntable with robust ball bearing race, support wedges with holder Aluminum side impact protection, steel under-run protection, quarter panel fenders at the front and half-panel fenders at the rear 1 spare wheel holder for 1 spare wheel, with wheel fastening kit in chassis design Drawbar with tested 40 mm drawbar eye, drawbar height adjustment via spring Gbsdpfx Afji Riz Hoksn BPW disc brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension 2-line compressed air braking system, color-coded line routing for easy servicing. Air reservoir 208 liters Spring-loaded parking brake, 2 tamper-proof coupling heads at the front, with connecting lines to the towing vehicle, EBS manufacturer Wabco, electronic braking system with EBS connector at the front, with connecting cable, (Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!) with raise and lower valve, holding function in both lower and raise positions 24 Volt, 4 x 3-chamber lights + 1 round reversing light + 1 round rear fog light, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin connector at the front, with connecting cable, 1 additional LED work light at the rear, switched via reversing light, 1 LED work light at the front, centered between the supports, emitting light towards the rear, switched via reversing light Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Please note: the images shown are archive images! The vehicle may be in use.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, total length: 10,020 mm, total width: 2,550 mm, tire size: 445/45 R19,5", color: grey, Further information Fine-grained steel welded construction 1 gear support foot at the front, with straight lower section and single-sided operation in FR right Wheel chocks with holder, aluminum side bumpers, steel underride guard Half-shell mudguards protrude slightly over the main frame, bumpers at the rear Tandem trailer towing device Towbar with tested 50 mm towing eye, forwarding agent version, under-coupler towbar Axles + suspension BPW disc brake axles, manufacturer's choice Air suspension with lift & lower valve Wheels and tires Gbjdjni Udzopfx Afksn 445 / 45 R 19.5, manufacturer's choice, steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake, Duomatic connection at the front, with connecting cable to the motor vehicle, EBS, electronic braking system with EBS plug at the front, with connecting cable Make Haldex, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Floor: Platform length approx. 7,300 mm, screen-printed floor Front wall: aluminum approx. 1,200 mm, steel corner stanchions in volume design Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin plug at the front, with connecting cable Approval / plates Country of registration: Germany, with Dekra approval and certificate 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT21301005260, empty load weight: 2,500 kg, maximum load weight: 10,900 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2015, tire size: 285/70 R19,5", Further information Chassis: fine-grained steel welded construction, telescopic support leg, wheel chocks with holder, steel underride guard, half-shell mudguards Towing equipment for tandem trailer: Towbar with tested 50 mm towing eye, under-coupler, mechanically length-adjustable towbar Gbodpfxsi Ri Rrj Afkon Axles: BPW disc brake axles, air suspension with lifting & lowering valve, electronic dolly steering system Brake system: 2-line compressed air brake system, spring-loaded parking brake, Duomatic coupling head at the front, with connecting lines to the tractor unit, interchangeable coupling heads to the trailer, EBS, electronic brake system with EBS plug at the front, with connecting cable Electrical system: 24 volt, amber lighting at the sides, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable to the truck, 1 x 15-pin plug with connecting cable to the trailer Approval: Contour markings with reflective strips to ECE R 048, warning sign to ECE - 70, truck Saddle height approx.: 950 mm

Condition: used, machine/vehicle number: WFDFLT33902026418, empty load weight: 7,156 kg, maximum load weight: 27,844 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2019, next inspection (TÜV): 02/2026, loading space length: 14,980 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 15,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", color: grey, The images are archive pictures! Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, X-tra Long, with an internal length of 14,980 mm, outer frame slightly slanted with "Load-Lock profile" for securing lashing straps. 24 t, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with shim compensation. One wheel chock with holder, aluminum side underrun protection, galvanized steel rear underrun protection, quarter-shell mudguards in front of the 1st axle and behind each axle, "Heavy Blocker" rear cross ramming protection + "roller buffer side impact protection." Pair of ferry lashing rings, yellow marked, heavy-duty pallet stops on both sides, approx. 15-20 mm high, with lashing option every 200 mm, loading height reduced by approx. 15-20 mm, spare wheel holder for 1 spare wheel, with wheel mounting kit, spare wheel of same brand and specification as main tires, steel rim, plastic toolbox, with drawer and intermediate shelf, width=650 / height=520 / depth=670 mm, lockable with padlock. Axles & Suspension: BPW disc brake axles, "axles/chassis laser measured" to reduce tire wear and fuel consumption, hubodometer/kilometer counter, air suspension, air spring diameter 360 mm, total lift approx. 260 mm. Brake System: 2-line compressed air brake system, spring-loaded parking brake, 2 non-swappable coupling heads at the front without connection line, EBS by Knorr, electronic braking system with EBS socket at front, no connection cable. Wheels & Tires: 435/50 R19.5" steel rims, factory silver, ET 120. Electrics: 24 volt, 4 x 3-chamber LED taillights with resistors, + 2 round combination reverse/fog lights in LED, yellow LED side lighting. License plate lighting in LED. 1 x 15-pin socket at the front, without interconnection cable. Floor: Approx. 30 mm thick phenolic coated plywood, cross joints with omega inserts, on longitudinal subframe for high point load capacity for forklift axle loads up to max. 7,100 kg. Superstructure: Mounted superstructure. Front bulkhead / corner posts at the front have signs of use. 2,580 mm high, volume version steel corner posts, side curtain release device at bulkhead, "Crash Blocker"—internal steel ramming guard approx. 140 mm high at the bottom. Center posts: Pair of sliding posts adjustable over the entire length, with 7 multiple stake pockets. Insert slats: Rows of aluminum V-insert slats incomplete. Fliegl "I-Lock" integrated door locking mechanism. Tarpaulin shows signs of use, with welded horizontal and vertical straps. Roof: Sliding roof, rear end liftable, with roof sliding from rear to front, L- type, tarpaulin color: white. Hydraulic lift roof on both sides, one cylinder with hand pump per post, can be lifted by 400 mm, front with 3 driving positions: inside height approx. 2,900 mm / 2,950 mm / 3,000 mm, set to approx. 2,950 mm. Anti-ice system with 1 hose in the middle, automatic forced venting via brake light (not available in combination with sliding roof openable from the front). Optimum rain gutter at the rear, top of the end hoop, above the doors. Operating instructions: Gedpfsy Efzkjx Afkjbn Special permit required if total towing length exceeds 16,500 mm. Approvals / Certificates: Load securing certificate according to EN 12642 XL (valid only with 4 rows of aluminum slats), additional DC 9.5 certificate, heavy-duty pallet stops on both sides, approx. 25 mm high, loading height reduced by approx. 25 mm. The images are ar

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024288, empty load weight: 6,075 kg, maximum load weight: 32,925 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: blue, The images are archive photos! The vehicle may still be in use! Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment. Note! To attach the straps in combination with sideboards, the sideboards must be opened! 24t, 2-speed landing gear, single-sided operation, with straight base, without compensating slide Pull-out ladder at the rear Side door retainers 2x wheel chocks with holder Attention! Only Chassis No. 2024286 - 89: Pallet box for 30 Euro pallets (ground clearance approx. 220 mm) Underrun protection, galvanized steel Quarter-mudguards in front of and behind axle assembly With EC-compliant anti-spray flaps Rear impact protection Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (padlock not included) Axles + Suspension SAF axles "Axle/chassis laser aligned" reduces tire wear and fuel consumption Gbjdpfx Aey Dfprefkjn Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by "brake 3x" (starting aid functions up to a 30% axle overload and up to max. 25 km/h) Brake system 2-line compressed air brake system, color-coded lines for easy servicing. Spring-type parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels and Tyres 385/65 R22.5, manufacturer at the manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Front bulkhead / corner stanchions 2, 580mm high, steel corner stanchions in volume design, release mechanism for side curtain at the front bulkhead "Crash-blocker", internal steel impact protection at about 140mm height Center stanchions 3 pairs of sliding stanchions movable along the full length, with 4 insert pockets and a long pocket at bottom 3 pairs of stanchion positions Rear wall / rear corner stanchions Rear corner stanchions up to the lower edge of the roof, curtain attachment with round tube and ratchet tensioner Rear portal doors, two-leaf, each with two internal rotary bolt locks Tarpaulin Tarpaulin with integrated horizontal and vertical belts Tension latches made of stainless steel Roof Sliding roof, rear liftable end, can be slid from rear to front, tarpaulin color: white Optimized rain gutter at rear, on top of the rear bow, above the doors Operating instructions When assembling combinations, ensure compliance with the legally permitted overall vehicle height! If the total height exceeds 4,000 mm, please observe the following: The transport contractor is responsible for any resulting damages. The transfer agent must obtain permission according to § 29 StVO We assume no liability for the transfer of the vehicles. The images are archive photos! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Gbsdsyxq A Hepfx Afksn Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: blue, The images are archive photos; the vehicle may still be in use! Chassis Platform Semi-Trailer for Freight Forwarders Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock" profile for lashing strap attachment Note: In order to attach the straps in combination with side walls, the side walls must be opened! Pair of additional lashing rings integrated into the outer frame, each rated at 2.5 t 24 t, two-speed landing leg, single-sided operation, with straight base, without compensation mechanism Pull-out ladder at the rear Side-mounted door retainers Wheel chocks with holders Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or rear swing clearance approx. 1,930 mm Underrun protection, galvanized steel Full-width rear spray flaps Half-shell mudguards With anti-spray mud flaps only on the last axle Rear impact guard "Blocker" – galvanized crosswise steel angle as forklift and hinge protection Pair of ferry lashing eyes, marked yellow Pallet stop on both sides, approx. 15-20 mm high, bolted design; loading height is reduced by approx. 15-20 mm Spare wheel holder for one electronic wheel, including wheel mounting kit, basket type, brand Schoch! Spare wheel, same brand/type as main tires, steel rim Stainless steel toolbox, width=600/height=400/depth=500 mm, with polished, lockable door Stake pockets Front right: 5 rows of aluminum V-stake inserts Front left: without stake inserts Rear wall / rear corner posts Rear corner posts made of steel up to the lower edge of the roof, curtain pole mount with round tube and curtain tension ratchet Rear portal doors, 2-leaf design, each with 2 internal rotary bolt locks Curtain Godpewyiw Eofx Afkebn Curtain with welded horizontal and vertical straps Quick Lock system for side curtain with central locking, on left side only Stainless steel tension locks on right side Customs rope all around with holder at front wall (no customs seal, not in combination with Quick Lock) Customer labeling on side curtains and rear portal Curtain with high-strength embedded spring steel strips, left side (Attention! When fitted, no stake inserts front left) Roof Sliding roof, rear end-lift foldable upwards, sliding tarpaulin from rear to front, tarpaulin color: white EcoLift – roof can be raised by approx. 380 mm, both sides, gas strut assisted Optimal rain gutter at rear, upper end rail, above the doors Paintwork Frame: Hot-dip galvanized incl. passivation Landing legs: black coated Front corner posts: galvanized and painted to match front wall color Front wall: MB 5328 blue Rear corner posts: galvanized and painted to match rear wall Rear wall: MB 5328 blue Curtain: RAL 5010 gentian blue Pallet box lid: RAL 2011 deep orange The images are archive photos; the vehicle may still be in use!

Condition: used, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Further information Chassis: Welded steel construction, double offset with drop deck in front of and behind axle unit, drop deck slanted towards entrance, turntable with strong ball bearing slewing ring, folding rear support, wheel chocks, side collision protection, quarter-shell mudguards Lashing eyes: above front axle: 2 pairs of ring lashing eyes per 5 tons at the front on the offset drop deck/rear axle: 6 pairs of lashing eyes laterally in the drop deck per 8 tons, 6 pairs of lashing eyes per 5 tons between the side members, pair of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 tons ring lashing eyes embedded in the floor. Ring lashing eyes embedded in the floor Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Gbodpfx Afei Ri N Uskon Brake system: 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads Electrical system: 24 volt, multi-chamber lights, amber lighting at the sides, 2 white position lights at the front 2 white/red lane departure lights at the rear, rotating beacon with holder, pair of warning signs illuminated and extendable to 3,000 mm, 2 x 7-pin interchangeable plugs at the front Floor: Front offset with steel / checker plate covering, storage box recessed in drive-over slope to offset, tramline area and in the middle between the beams with steel / checker plate covering, rear slope with 70 mm softwood floor, deep loading area incl. rear slope 5900 mm Drive-on ramps: Hook-in strip for aluminum ramps across the entire width. as U-profile across the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, transport company Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219, 2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension, Godpewhp A Dsfx Afkebn without lift axle. The images are archive images; the vehicle may still be in use.

Condition: used, machine/vehicle number: WFDFLT21601003373, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2013, tire size: 285/70 r19,5, Further information 4 VEHICLES AVAILABLE! - 4 VEHICLES AVAILABLE! - 4 VEHICLES AVAILABLE! - 4 VEHICLES AVAILABLE! Fine-grained steel welded construction, fifth wheel coupling, make of our choice for 2\ kingpin with ball bearing slewing ring, max. 20° stop, telescopic support foot, 2 wheel chocks with holder, steel underride guard, half-shell mudguards \CLG\ under-coupler drawbar with tested 50 mm drawbar eyes to the dolly and to the motor vehicle. BPW disc brake axles, air suspension with lifting & lowering valve 2-line compressed air brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit2 non-interchangeable coupling heads to the trailer EBS, electronic brake system with EBS plug at the front, with connecting cableEBS connecting cable to the trailer Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition for trucks via EBS, without truck instal. 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable to the truck 1 x 15-pin plug with connecting cable to the trailer Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Gbjdpji Ri N Rjfx Afkon Fine-grained steel welded construction, fifth wheel coupling, make of our choice for 2 kingpins with ball bearing slewing ring, max. 20° stop, telescopic support foot, 2 wheel chocks with holder, steel underride guard, half-shell mudguards CLG under-coupler drawbar with tested 50 mm drawbar eyes to the dolly and to the motor vehicle. BPW disc brake axles, air suspension with lift & lower valve 2-line compressed air brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit2 non-interchangeable coupling heads to the trailer EBS, electronic brake system with EBS plug at the front, with connecting cableEBS connecting cable to the trailer Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition for trucks via EBS, without truck instal. 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable to the truck 1 x 15-pin plug with connecting cable to the trailer Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour markings with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Saddle height approx.: 1150 mm