Used Elbaron Ron A 200 Sh for sale (79,218)

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) Hnsdpfxjwbilxo Aagjl ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! Hnodpfswbilljx Aagol ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? Hnedpfx Aajwbil Sjgjl For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: new, Chiron 1122242 / 562 006 HSK-A63 coupling gripper SN: H308, unused, 100% functional, scope of delivery as per photos. Hsdpfx Aasy Np Ipogjnl

Condition: new, Chiron 1122242 / 562 006 HSK-A63 clamping gripper SN: 9F08 with 5721028100 / 95281 tool arm 1088539/00 CW49/15, unused, 100% functional, scope of delivery as per photos. Hnodpfoy Np Ivjx Aagjl

Condition: used, operating hours: 1,330 h, Equipment: all wheel drive, Sale on behalf of customer---- Vehicle/Machine Type: Construction machine (Other construction equipment) Structure: Tracked mobile stockpile conveyor Manufacturer: Pronar Model: MPT 30/1 G Power: 55.4 kW Displacement: 2,800 cc Drive Type: Diesel OBD Drivetrain: All-wheel drive Transmission: Automatic Operating hours (read): 1,330 hours Hsdpfx Aey Skcmoagsnl Exterior color: green Dimensions and Weights External dimensions (L x W x H): 12,620 mm / 2,950 mm / 3,248 mm Permitted total weight: 15,500 kg Standard and Special Equipment Standard equipment: - Conveyor belt length (total structural length): 30 meters - Maximum discharge height: 13.8 meters - Maximum incline angle: 25 % - Belt width: 1,000 mm - Maximum belt speed: 2 m/s - ...and much more. ----The machine is offered as-is, not refurbished! Nationwide delivery available at extra cost. Errors and prior sale excepted. Trade-in of your vehicle is possible. Financing/leasing available with no down payment! Do you have any questions? We are happy to advise you!

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro C7200x’ colour production system Items for sale: 1 x Ricoh Pro C7200x with the following specifications: Includes Fiery Controller E-45A Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5050 incl. Banner Sheet option Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,403,577 pages Colour: Approx. 1,749,798 pages Black: Approx. 653,779 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. Hnedpfx Aaey Dffyjgsl For further information, you are of course welcome to contact us directly.

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Hnedpfx Aasgkgwfsgjl Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Year of construction: 2007, condition: good (used), Used Bystronic Model VR – 3100mm x 6.5mm guillotine for sale Make: Bystronic Byshear Hodjq Dpuhepfx Aagenl Model: VR 6.5-31 Cutting capacity: 6.5mm Cutting length: 3100mm Rake angle 0.5-2.5 Back gauge range 1200mm Max Back gauge speed 180 mm/s Hydraulic Variable Rake Guillotine Shear. Including cnc control CYBELEC DNC 60 Programmable Back Gauge. Auto Blade Gap Adjustment. Front Supports & Squaring Arm. New/year 2007 Bystronic vr 6.5 x 3000 – 3metre x 6mm guillotine for sale

Condition: used, maximum load weight: 24,266 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 06/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 3,990 mm, Year of construction: 2020, Equipment: ABS, Krone SD Curtain Mega Liner Semi-Trailer SZP 18 Edscha, hydraulic lifting roof, color: black-black, 2-axle 2-axle Payload: 24,266 kg Tyres: 435/50 R 19.5 Krone axles Edscha sliding roof Sliding curtain Hydraulic lifting roof with 500 mm total lift Floor type: BO13620 30 mm thick, waterproof plywood floor, cut edges fully sealed, large-area, watertight bonding between chassis and floor panel using permanently elastic high-performance adhesive. Strength according to EN283, for floor loads up to max. 7,000 kg forklift axle load. Premium visible sealant Accessories: Rear external steel impact corners as trapezoidal box, Delta rubber buffer profile rear cross on rear frame, pallet stop welded on left side rail, approx. 20 mm high, pallet stop welded on right side rail, approx. 20 mm high Continuous steel bulkhead with reinforced corner stanchions, inner front wall reinforced with phenolic resin-coated board Loading area: 13,620 x 2,480 x 3,000 mm Fifth wheel height unladen: 975 mm Multilock external frame with universal cargo securing options every 100 mm Rear sliding step ladder LED side marker lights 1 rear fog lamp Hnedpey Ifxnjfx Aagol 1 reversing lamp 10-year Krone manufacturer’s warranty against rust-through Detailed trailer construction description available on request. 'Cargosecuring certified' (EN 12642 XL)

Condition: excellent (used), functionality: fully functional, Rondo comas HD 3000 pastry sheeter Hjdpfx Ajt Twp Hoagjnl

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm Hnodpfx Aaoyz Iu Sjgsl simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. brass: 25 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 62 kW

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Hjdpfx Asv U A I Ieagenl Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. brass: 25 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 5300 kg Electrical connected load: 60 kW

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 6100 x 2550 x 440 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Hedpsyynmrofx Aagonl Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 4700 kg Length: ??? mm Width: ??? mm Height: ??? mm Machine weight: 14200 kg Electrical connected load: 62 kW

Condition: new, Laser power: 12000 Watt Working range laser: 6100 x 2050 x 440 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 4700 kg Length: 12000 mm Hnedpsxaykysfx Aagsl Width: 5000 mm Height: 2200 mm Machine weight: 14200 kg Electrical connected load: 62 kW

Condition: excellent (used), Year of construction: 2017, operating hours: 8,919 h, functionality: fully functional, REF: MM6307 Hnodpfx Ajxvzqtsagel 1 x Rondo Compas HD Series pastry sheeter with touch-screen control panel and automatic flour duster. This pastry sheeter is capable of storing up to 100 different product programs to produce various different pastries. Model - SFA6127H. Serial number - D7603879. Date of manufacture - 2017. Useable width - 600mm. Table length overall - 3500mm. Electrical requirements - 420 V / 50 hz / 3 phase. Power - 1.4 kW / 2.7 Amps. Overall dimensions (with dough catch pans extended) - 3820mm long x 1260mm wide x 1530mm high. Total machine weight - 420 kg. Condition - Excellent, ex-bakery condition.

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. Hsdpfx Aoy Ehngjagjnl High knives, in very good condition. Weighs over 400 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New machine - Rondostar Successor model to the SFE 6607H 2 years warranty Advantages: + Machine with full stainless steel housing + Equipped with automatic flour duster + With automatic roller adjustment + With automatic reel + Dough band is reeled without significant tension + Integrated electric motor + High-quality synthetic belts, easy to clean + Easy to move, with swivel castors and locking feet for stable positioning + Operation via touch panel + Computer control (100 programs) and manual operation via push buttons possible + Tables can be folded up on both left and right sides + Strippers can be easily removed without tools + Machine comes standard with 1 hand-operated reel + Hand reel supports on left and right sides + With dough catch pans on both sides + Fast spare parts supply within 1-2 working days Technical Data: - Dough piece weight: max. 15 kg - Belt width: 635 mm - Roller width: 660 mm - Safety guard clearance: 90 mm - Table length: 3,320 mm - Roller adjustment: from 0.2 mm to 45 mm (product dependent) - Speed: approx. 85 cm/sec - Motor power: 1.1 kW / 2 kVA - Electrical connection: 400 V - 3Ph - 50/60Hz Hjdpfxjivdmbo Aagjnl - Fusing: 16A CEE plug - Dimensions: --- Working position: 3700 x 1235 x 1250 mm (WxDxH) --- Resting position: 2230 x 1235 x 2170 mm (WxDxH) - Net weight: 310 kg

Condition: new, Year of construction: 2025, warranty duration: 24 months, New machine – Rondostar Successor model to the SFE 6605 2-year warranty Advantages: + Machine with fully stainless steel housing + Equipped with automatic flour duster + With automatic roller adjustment + Integrated electric motor + High-quality synthetic belts, easy to clean + Easily movable on swivel castors with locking feet for stable positioning + Operation via touch panel + Computer control (100 programs) and manual operation possible via push buttons + Tables can be folded up on both left and right sides + Scrapers can be easily removed without tools + Machine comes standard with 1 manual reel + Manual reel supports on left and right + Includes dough collection trays on both sides + Fast spare parts service within 1–2 working days Technical data: - Dough piece weight: max. 12 kg - Belt width: 635 mm - Roller width: 660 mm - Safety guard passage: 90 mm - Table length: 2,720 mm - Roller adjustment: from 0.2 mm up to 45 mm (depending on product) - Speed: approx. 85 cm/s - Motor power: 1.1 kW / 2 kVA - Connection values: 400 V – 3Ph – 50/60Hz Hodpfeivdlzjx Aagjnl - Fuse: 16A CEE plug - Dimensions: --- Working position: 3100 x 1235 x 1250 mm (W x D x H) --- Idle position: 1780 x 1235 x 1900 mm (W x D x H) - Net weight: 270 kg *Images show the machine with automatic reel, however, this model is supplied without automatic reel!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New machine - Rondostar Successor model to the SFE 6607 2-year warranty Advantages: + Machine with full stainless steel housing + Equipped with automatic flour duster + Automatic roller adjustment + Integrated electric motor + High-quality synthetic belts, easy to clean + Easily movable, with steering castors and lockable feet for stable positioning + Operation via touch panel + Computer control (100 programs) and manual operation via push-buttons possible + Tables can be folded up left and right + Scrapers can be easily removed without tools + Machine is standard equipped with 1 manual winding crank + Manual winding crank supports on the left and right + With dough catch trays on both sides + Fast spare parts supply within 1-2 working days Optional at extra charge: - Automatic winding device The dough sheet is automatically wound with minimal tension. + €3,075 net Technical data: - Dough piece weight: max. 15 kg (product-dependent) - Belt width: 635 mm - Roller width: 660 mm - Safety guard clearance: 90 mm - Table length: 3,320 mm - Roller adjustment: from 0.2 mm to 45 mm (product-dependent) - Speed: approx. 85 cm/sec - Motor power: 1.1 kW / 2 kVA - Electrical connection: 400 V – 3Ph – 50/60Hz - Fusing: 16A CEE plug - Dimensions: --- Working position: 3700 x 1235 x 1250 mm (WxDxH) Hnodpoivdl Esfx Aagol --- Standby position: 2150 x 1235 x 2170 mm (WxDxH) - Net weight: 280 kg

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 118413, (Please tell us your offer price) Sale only within Europe, incl. Turkey Hnjdpfxoydqk Ho Aagsl Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, KRONEN GEWA 2600V – Fully Refurbished Vegetable Washing Machine We are offering a Kronen GEWA 2600V vegetable washing machine in excellent condition, fully refurbished and ready for immediate use. Refurbishment Details: - Completely overhauled by professionals Hjdjxft Ntspfx Aagonl - Fitted with a brand-new original pump - All parts inspected, cleaned, and tested - Machine runs smoothly and efficiently Features: - Efficient vegetable and salad washing system - Gentle product handling through whirl washing principle - Made of high-quality stainless steel - Ideal for food processing companies - Location: Emmeloord Available Immediately Invest in a high-quality machine with the reliability of KRONEN – now with the added value of a full refurbishment and a new pump! For more information, photos, or to schedule a viewing, please contact us.

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Maxi power: 220 A 2-step and 4-step mode (see more technical details on photo) Year of construction: 2021 New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono Hsdpfxjyk Elro Aagsnl

Condition: new, empty load weight: 5,787 kg, maximum load weight: 14,213 kg, overall weight: 20,000 kg, axle configuration: 1 axle, suspension: air, tire size: 235/72R17,5, Equipment: ABS, truck registration, | Krone City Liner Profi/1-axle curtainsider semi-trailer with forced steering | toolbox | spare wheel holder, Edscha roof | SAF axles with disc brakes | tare weight: 5,787 kg, payload: 14,213 kg | tires: 275/70R22.5 | tail lift 2000kg | length of loading area: 11.25m | errors excepted, subject to input and prior sale. Hedjwrriujpfx Aagjnl

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 4000 x 2000 x 270 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 3000 kg Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. brass: 20 mm Length: 12500 mm Width: 3650 mm Hnedpfjv Uz Tijx Aagjl Height: 2620 mm Machine weight: 18000 kg