Used Bacci 1994 Bacci Fch8 for sale (335)

Condition: excellent (used), Year of construction: 1994, Metal cutting Tooling COLOMBO & LENNA - 600 MACH-ID 4214 Make: COLOMBO & LENNA Type: 600 Year: 1994 Diameter: 600mm 4 chuck: x Itodpfx Ajzc Ix Eea Ish Spindle bore:115mm Connector: 11 Diameter 600 mmConnection Camlock 11Bore 115 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1994, condition: ready for operation (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 13 bar increased test pressure : 23,4 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1994 1 pipe set blind Itodpfx Aaelx Azyj Ish equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings

Year of construction: 1994, condition: excellent (used), 1 used steam boiler ----- manufacturer : Jumey heating surface approx. : 40 qm capacity max : 2.000 kg/h max. allow. working pressure : 10 bar so far operated with : 5,0 bar water contents low level approx. : 3.540 l water contents full approx. : 4.750 l year of construction : 1994 equipped with Weishaupt gas burner, fittings for gas supply, switch cabinet, feed water pump and the existing fine and coarse fittings. Isdpfx Aasikvdie Isth

Year of construction: 1994, condition: ready for operation (used), overall weight: 27,000 kg, pressing force: 153 t, Hydraulic press manufactured in 1994. This EXNER EX SBR 150 features a pressing force of 1500 kN and a drive power of 46.5 kW. It has an oil capacity of 1300 liters and weighs 27000 kg. The machine is equipped with integrated front safety light curtains, protective yellow mesh guarding, and an operator control panel. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 150 machine we have for sale. Contact us for further details. Isdpfxezd Ea Is Aa Ieth - Drive Power: 46.5 kW- Oil Capacity: 1300 liters- Overrun Distance: 48 mm- Safety Distance: 216 mm- Overrun Time: 135 ms- Components: Equipped with integrated front safety light curtains, protective yellow mesh guarding, an integrated operator control panel on the frame, and a standalone main electrical control enclosure. Includes an additional die component plate.

Condition: good (used), Year of construction: 1994, load capacity: 1,250 kg, lifting height: 4,150 mm, fuel type: electric, mast type: triplex, empty load weight: 1,300 kg, obtained through trade-in: Electric three-way reach truck Iodpfx Asza Dy Hoa Isth Brand: BT Year of manufacture: 1994 In good condition Lifting height: 4,150 mm Capacity: 1,250 kg Mast height (with load): xxx Battery With external charger Watch the video on YouTube

Condition: repair required (used), Year of construction: 1994, machine/vehicle number: M-204, rotational speed (max.): 20 rpm, power: 44 kW (59.82 HP), input current: 84 A, input voltage: 380 V, type of input current: three-phase, We are offering this used MeWa UC140 two-shaft shredder, manufactured in 1994, for sale. Rated voltage: 380 V Power: 2 x 22 kW, BG 180 Frequency: 50 Hz Current: 84 A Cutting head size: 1,055 mm x 1,460 mm 87 mm wide cutting discs 03/04 pieces of cutting teeth arranged in a spiral pattern around the circumference to ensure optimal material feed. 45 mm cutting tooth height, including the corresponding spacer rings and scrapers. One shaft has suffered a shaft fracture. The machine has seen little use overall and is being sold with a control cabinet. Sold without warranty, as is, and as defective. Sale by auction. Itsdpfx Aaezdq Eps Ieh If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1994, Brand: HSM Model: 155 VL Year of construction: 1994 Pressing force: 157 kN Iedpezc Hhxsfx Aa Isth Voltage: 400 Max. bale weight: 250 kg Bale dimensions: 110 x 70 x 95 cm Machine weight: 950 kg Machine dimensions: 144 x 100 x 234 cm Feed opening dimensions: 110 x 59 cm

Condition: ready for operation (used), Year of construction: 1994, spindle motor power: 28,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, total height: 2,700 mm, total width: 4,500 mm, overall weight: 11,700 kg, product length (max.): 4,500 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 60 U was manufactured in 1994. It features impressive X, Y, and Z-axis travels of 600 mm, 700 mm, and 600 mm respectively, along with a maximum spindle speed of 12,000 rpm. The machine includes a robust table size of 630 x 500 mm and a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 60 U mill-turn centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): up to 30 m/min • Table: NC rotary-tilting; size 630 × 500 mm; • Spindle: up to 28 kW; • Tool magazine/ATC: automatic tool changer • Machining capabilities: simultaneous 3-axis milling; contouring; drilling; tapping; boring; complex surface machining; aerospace and automotive component manufacturing Itjdozcp Alspfx Aa Ijh • Construction/design: high-rigidity universal machining centre; integrated rotary-tilting table; full 3-axis interpolation; precision linear guideways • Dimensions (approx.): length 4,500 mm; width 2,500–4,500 mm; height 2,500–2,700 mm • Typical applications: aerospace components; medical parts; tool & die manufacturing; automotive components; precision mechanical engineering Additional equipment • Internal coolant system • Chip conveyor • Touch probe • Tool setter • Tool measurement system (Blum / Renishaw, depending on machine) • Electronic handwheel • Automatic pallet changer (RS4 versions)

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller Isdpfx Aaox N A Aaj Ijth – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm Itedexgbwzopfx Aa Ijh FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage Iodsv Tzphspfx Aa Ijth - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: HFBO 125 30 H40402, stroke length: 3,000 mm, Fully refurbished in 2019, AMADA PROMECAM 125.3 press brake, year of construction 1994. Excellent Condition. Iodpfxoy Nibcs Aa Isth If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D12U/8492, Offer Number: D12U/8492 Machinetype: wire nail press Make: WAFIOS Type: N61 Isdpjzd U Riefx Aa Ijth Constr. year: 1994 wire diameter: 3,1-5,2 mm nail length: 13-150 mm capacity - pieces/min: 370 Location: Outside of Europe

Condition: ready for operation (used), Year of construction: 1994, quill travel distance: 170 mm, throat depth: 900 mm, power: 3 kW (4.08 HP), High-speed radial drilling machine Manufacturer: HKS, Type: HKS 34 MG Year of manufacture: 1994 Iodpfxozbr Ibj Aa Ieth Technical data Manufacturer: HKS Type: 34MG Year of manufacture: 1994 Drill spindle mount: MK 4 Overhang: max. 900 mm Drilling capacity: 32/38 mm, see data sheet Drill spindle stroke: 170 mm Distance spindle – table: 300 / 750 mm Motor power: 3 kW Clamping area with T-slots: 1050 x 420 mm External dimensions W x D x H: 1400 x 2000 x 2450/2900 Weight approx.: approx. 2000 kg Equipment - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Swivel table 510 x 310 mm All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1994, For Sale: Iodewlpnbepfx Aa Ijth Used double spiral kneader from Diosna type: W240A year of manufacture: 1994 Included: 3 dough tubs W240 The kneader can be viewed here on location. Transport in consultation. If you have any questions or comments, we would like to hear from you With Kind Regards, Leo Holland Everything is complete

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Isdpfx Aeza D Eija Ijth Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Iodpfxoza Hzgo Aa Ieth Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: used, Year of construction: 1994, type of input current: three-phase, Equipment: documentation/manual, I am offering a continuous-flow rotary mixer from Wöhr, available due to a company liquidation. Includes control system, sand hopper, and sand feeder. Spare blades for the mixing screw are also included. The machine is currently still connected and was operational until the company closed. Year of manufacture: 1994 Capacity: up to 5 t/h Siemens spare parts, as well as a laptop with software and memory chips, are included. 2 folders with documentation. For self-dismantling. More photos and details, as well as a viewing appointment, are available upon request. Iodpfx Ajzb Eh Uja Ijth Please feel free to contact me via classified ads with your price offer. For self-dismantling. Dismantling can be organized for an additional cost. Sale ONLY to businesses. An invoice with VAT will be issued. Without warranty.

Year of construction: 1994, condition: good (used), Approx. 580 stackable storage boxes, e.g. for long goods, carpet rolls or similar, Freimuth, approx. 1.18m x 1m x H 0.98m – used -: Unit price ex location: only €59 (net)! Bulk price (complete take-over): only €45 / box (net)! Manufacturer: Freimuth Type: unknown Year of manufacture: 1990 - 1994 Permissible load capacity: 1,000 kg Permissible stacking load: 2,000 kg Own weight: approx. 70 kg Height: approx. 980 mm Internal height: approx. 840 mm Iedpfxsx Tg Hke Aa Ijth Underride height: approx. 95 mm Width: approx. 1,180 mm Internal width: approx. 1,095 mm Depth: approx. 1,000 mm With pins for stacking Metal frame, lined with sheet metal Condition: good Available: immediately Location: 47198 Duisburg

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical data: - Cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front side - 4 speeds with electronic speed display - External spindle lock - Milling fence with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top and bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment: 220 mm - Table opening: 300 mm - Usable spindle length: 1890 mm - Extraction ports: 150/120 mm - With 4-roller power feed unit Iodoxllw Ajpfx Aa Ijth Weight: 600 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1994, Model: CookStar CKH400/8/130 Year of manufacture: 1994 Condition: Used Serial number: 138 Stock number: 3341G Itsdoy R Tiaspfx Aa Ioh Belt width: 400 mm Description: Equipped with belt water pump and CIP system Rows: 2 x 4 units Belt length: 44 m Product opening: 130 mm Dwell time: 2.5 - 75 min Temperature: max. 200 °C Heating: thermal oil, 300 kW Extraction: 2 x 2000 m³/h Steam: NW40, 4 - 8 Bar Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 35kW Dimensions: 8250 x 3150 x 4250 mm Weight: 12000 kg

Condition: good (used), mileage: 84,633 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,400 mm, first registration: 10/2022, loading space length: 1,080 mm, loading space width: 1,560 mm, loading space height: 1,390 mm, emission class: euro6, color: black, driver cabin: day cab, tire size: 235/55R17, number of seats: 9, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Bluetooth - CarPlay - Electric windows - Electric mirrors - Halogen lamp - None - Alloy wheels - Manual - Radio/Cassette - Reversing camera - Fabric - Blind spot sensor = Notes = Configuration: 4x2, Tare weight: 3080 kg, Gross vehicle weight: 1994 kg, Tow hitch, Alloy wheels, Air conditioning, Number of airbags: 2, Auxiliary heater, Rear window wiper, Parking assistance: Front and rear, Electric windows, Electric mirrors, Radio/Cassette, CarPlay, GPS navigation, Color: Black, Metallic, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Bluetooth, Blind spot sensor, Engine power: 110 kW (148 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Roof rack: None, Side doors: 1, Side windows: 4, Rear closure: Tailgate, Central locking, Seats: 9, Seat arrangement: 1+3+3+2, Seat cover: Fabric, Seat adjustment: Manual, ac automatic EURO6 9-seater carplay, Tire type: All-season tires = Additional Information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 235/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 2 mm Axle 2: Tire tread depth left: 2 mm; Tire tread depth right: 2 mm Dimensions and weights Unladen weight: 3,080 kg GVW: 1,994 kg Dimensions (L x W x H): 535 x 190 x 205 cm Functional Iodpfxsx Uwirj Aa Ijth Loading area height: 60 cm Maintenance APK (Technical Inspection): valid until 10.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €449 per month (delivery van, 72 months); Please inquire for further information and conditions

Condition: ready for operation (used), Year of construction: 1994, Studer S30-1 Ijdpfx Aoy Rmxuja Ieth Year of manufacture: 1994

Condition: used, Year of construction: 1994, operating hours: 6,852 h, Type of fuel: Diesel Colour: Grey Empty weight: 3.920 kg Dimensions (LxBxH): 263 x 115 x 254 cm Lifting capacity: 2.500 kg Itedpfx Aeyr D Eaea Ijh Lift height: 400 cm Fork dimensions: 90 x 1.000 mm - Year: 1994 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6BN10101 - Operating hours: 6852 - Lifting capacity: 2500kg - Lifting height: 4000mm - Overhead clearance: 2540mm - Free lift: 0mm - Fork length: 90mm - Maximum fork width: 1000mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Half cabin, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Mitsubishi - Transport dimensions: 2630mm x 1150mm x 2540mm (l x w x h) - Transport weight [kg]: 3920kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), total length: 5,400 mm, total width: 1,800 mm, plate height: 350 mm, Manufacturer: STOLLE Type: DTG Year of manufacture: 1994 Itjdswp Epiepfx Aa Ijh Specifications Metric US Standard Length 5400 mm Width 1800 mm Height 350 mm Number of T-slots 6 Distance between T-slots / Pitch 300 mm T-slot size 36 mm Number of matching pieces 1 Dimensions (Estimated) Length 5400 mm Width 1800 mm Height 350 mm Weight 7500 kg Please note: The information on this page has been, to the best of our knowledge and belief, provided by us and, wherever possible, obtained from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contractual terms. We recommend that you verify all important details.