Forklift

Caterpillar DP 25

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 5,490 h, load capacity: 2,500 kg, lifting height: 4,750 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, power: 38 kW (51.67 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Prsdpfxjzxktcs Ac Asb Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: Diesel forklift CATERPILLAR CAT DP25N - - Lifting capacity 2.5 tons - - Year of manufacture 2010 - - Side shifter - - - Fork positioner - - - Triplex free-lift mast - - - Overall height 2.15m - - - Lifting height 4.75m - - - 5490 operating hours according to the display - - - good solid rubber tires (front approx. 90% - rear approx. 80%) - - - 4-cylinder Mitsubishi diesel engine 51 hp - - - Service recently performed - - - including forks - - - very maneuverable front forklift - - good condition - - - Delivery possible!! Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin

Year of construction: 2017, condition: used, General information Mileage: 99.451 km Field of application: Grounds care Podozh Uyxopfx Ac Ajrb Technical information Power: 110 kW (150 HP) Type of fuel: Diesel Weights Empty weight: 1.600 kg Carrying capacity: 2.145 kg GVW: 3.745 kg Environment Emission class: Euro 6 Condition General condition: good Technical condition: good Visual appearance: good Additional information Please contact Christian Theißen for more information Manufacturer: Audi Model: Audi A4 Avant / emergency vehicle hatchback Year of build: 2017 Condition: Used Data: First registration: 07/2017 Fuel type: Diesel Mileage: 99.451 KM Gear type: Automatic Engine power/displacement: 110kW / 1968 cm³ Total permissible weight: 2.145 kg Empty weight: 1.600 kg Length: 4726 mm Width: 1842 mm Height: 1393 mm Environment badge: Green / Euro 6 Colour: white Equipment: Automatic front flashers, automatic air-conditioning, seats: 5, airbag, power window and power side-view mirrors, central locking system, ABS, ESC, radio, power steering Information: Equipment set-up: detachable emergency light and siren, hands-free system for mobile phones Location: 41468 Neuss immediately available

Condition: good (used), mileage: 453,030 km, power: 420 kW (571.04 HP), first registration: 02/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,500 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 7,250 mm, loading space width: 2,550 mm, loading space height: 990 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, electric window regulation, power assisted steering, trailer coupling, = Additional options and accessories = - Brake booster - Low noise - Speed limiter - Alloy wheels - Air suspension - PTO - Rotating beacon - Reversing camera - Sun visor - Tow hitch = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Front axle: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 11,414 kg Payload: 15,586 kg GVW: 27,000 kg Functional Body manufacturer: RESSENIG MACHINE TRANSPORTER Loading platform height: 99 cm Condition Technical condition: good Optical condition: good OFFER – Volvo FM 420 6x2 Towing and Transport Vehicle Chassis Make: Volvo FM 420 Axle configuration: 6x2 Engine power: 420 hp Emission standard: Euro 6 Automatic transmission Fully air-suspended chassis Day cab Air conditioning Alcoa alloy wheels Body Professional vehicle transporter equipped with: Loading platform made of hardwood Hydraulic winch Hydraulically operated ramps Dimensions of the ramps Length: 4,000 mm Width: 650 mm Dimensions of the loading platform Length: 7,250 mm Width: 2,550 mm Loading platform height: 990 mm The generous loading platform in combination with the extra-long hydraulic ramps makes this transport vehicle ideal for the safe and efficient transport of: Passenger cars Vans and light commercial vehicles Agricultural machinery Aerial work platforms Forklifts Construction machinery Other mobile vehicles and machines Thanks to the low loading platform height and the fully air-suspended chassis, a particularly shallow loading angle is achieved. This means that vehicles and machines with low ground clearance can also be easily loaded. Weights Unladen weight: 11,415 kg Maximum payload: 15,585 kg Key features ✔ Volvo FM 420 – 420 hp Euro 6 ✔ 6x2 axle configuration ✔ Automatic transmission ✔ Fully air-suspended chassis ✔ Day cab with air conditioning ✔ Loading platform made of hardwood ✔ Hydraulic winch ✔ Hydraulically operated ramps ✔ 4-meter long ramps ✔ Alcoa alloy wheels ✔ Loading platform 7,250 × 2,550 mm ✔ Loading platform height only 990 mm ✔ Maximum payload of 15,585 kg Area of application Prsdpfxjzg Ephe Ac Aob This Volvo FM 420 has been developed for professional use in vehicle recovery, vehicle transport, and machine transport. The reliable Volvo powertrain, the fully air-suspended chassis, and the high-quality transport body ensure maximum reliability, easy operation, and low operating costs. A versatile transport solution for companies that rely on quality, safety, and efficiency every day.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, planing width: 330 mm, rotational speed (max.): 9,000 rpm, total width: 615 mm, total height: 555 mm, total length: 850 mm, chip removal: 3 mm, height adjustment type: mechanical, number of feed rollers: 1, number of planer blades: 36, planing height: 156 mm, PS33 with spiral shaft • Innovative design and powerful motor. • Chip removal of up to 3.2m. • IN & OUT TABLE. • Double knife cylinder with double-sided knives. • Indicator shows the material removal on the front of the machine. • Planer shaft with reversible knife • No extraction system required thanks to integrated fan to remove sawdust from the planer cylinder • Depth stop with seven positions for repeated thickness planing at the same height • Maximum part width up to 330 mm • Type: PS33 • Recommended use: Craftsmen • Input power (230 V): 1.8 kW Pjdpfx Aevncu Iec Ajrb • Planer shaft speed: 9,000 rpm. • Planer shaft diameter: 46 mm • Number of reversible plates in planer shaft: 36 pieces • Reversible plate size: 15 x 15 x 2.5 mm, R=150 • Feed speed: 7.9 m/min. • Max. material removal: 3.2 mm • Max. planing width: 330 mm • Max. planing thickness: 156 mm • Min. workpiece length: 120 mm • Extraction: integrated fan, 62 mm suction nozzle or fabric bag • Noise level: 96 dB • Machine dimensions (length x width x height): 340 x 615 x 555 mm • Machine dimensions with tables unfolded (length x width x height): 850 x 615 x 555 mm • Machine weight: 35 kg • Packaging dimensions (length x width x height): 415 x 660 x 545 mm • Package weight: 39 kg Included in the package: • 36 carbide inserts (in the planer shaft) • 5 replacement carbide inserts and screws • Waste bag for sawdust and Dust • Connection set for waste bags • Torx key for changing the inserts (TX25)

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Predew Iddzjpfx Ac Aeb Max. forward feed speed: 25 m/min Operator shafts number: 6

Condition: used, Year of construction: 1999, 6 vertical storage tanks with jacket cooling Additional title: vertical, coolable stainless steel tanks Content: 2200 l Max. pressure: 0,99 bar Length: 1000 mm Predpfx Ajw Tlppec Aeb Width: 1000 mm Height: 1965 mm Operation / Control: manual Material: stainless steel 1.4301 Position: free-standing Base construction: cylindrical tank with curved bottoms and square tube feet on domes Features: sprayball, bunging apparatus, pressure gauge, 1 shell cooling zone, standhose for content display, manhole, thermometer and sampler in the shell, manual valve for cooling control, central bottom outlet

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Podozp Edwjpfx Ac Aorb Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Predpfex Dmdhex Ac Aeb Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Predpfxst Rp Hxj Ac Aeb Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm Predpfx Aceynbmmo Asb • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table