Used Kaak Kaak Tins, 40 Pieces for sale (30,318)

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Dksdjz Ic Nfjpfx Aa Iou Documentation: Available Video: On request

Condition: used, Year of construction: 2012, 2012 MultiWeigh HDW 20-40-60 TWIN multihead weigher with 20 weigh hoppers – used 20-head multihead weigher in TWIN configuration, built for frozen meat. The MultiWeigh HDW 20-40-60 TWIN is a multihead weigher with twenty weigh hoppers, made by HD-Wiegetechnik in Wetzlar. Thanks to the TWIN configuration the machine can run as two weighers and discharge two portions at once, or use all twenty hoppers for one heavy portion. The range runs from 230 grams to 5 kilos per weighment, with a 5-gram scale interval. The machine was built for frozen meat (product range 0 to -15 °C): dimpled stainless steel contact parts the product does not stick to, a wash-down IP65 build and an IPC controller with colour touchscreen. Built in 2012, complete with dispersion cone, feed pans and accessories. It is in Emmeloord and can be viewed and tested with your product. Key features - Twenty weigh hoppers in TWIN configuration: two portions at once or one heavy portion - Weighing range 230 grams to 5 kilos, 5-gram scale interval - Built for frozen meat, product range 0 to -15 °C - Dimpled stainless steel contact parts, wash-down (IP65) - IPC controller with colour touchscreen and a programme per product - Complete with dispersion cone, feed pans and accessories Why a TWIN weigher For every weighment a multihead weigher picks the combination of hoppers that comes closest to the target weight. With twenty hoppers the controller has plenty of combinations to choose from, and in TWIN mode the machine splits them over two outlets. One weigher then feeds two packaging machines or two lanes. For large portions you run all twenty hoppers to a single outlet. That makes the machine suitable for small retail packs as well as foodservice portions of up to 5 kilos. Refurbishment if you want it Take the machine as it stands here, or let us go through it first in our own workshop: inspection, replacing wear parts, cleaning and testing with your product. Exactly what is done is agreed per customer. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Dksdez Hqzgjpfx Aa Iju Machine type: Multihead weigher, TWIN configuration Condition: Used Number of weigh hoppers: 20 Weighing range: 230 - 5,000 grams Scale interval: 5 g (dw) / 10 g (d), accuracy class X1 Product: Frozen meat, 0 to -15 °C Controls: IPC611-W1200 with colour touchscreen Construction: Stainless steel, dimpled contact parts, IP65 Connection: 400 V, 50 Hz; compressed air 6 bar

Condition: used, -KOM 3099- CNC lathe VDI 40 tool holder set A set of VDI 40 tool holders consisting of 10 pieces is offered here. Contents: - 1x VDI 40 holder + internal turning tool from 50 mm diameter - 1x VDI 40 holder + internal turning tool from 23 mm diameter - 1x VDI 40 holder + internal turning tool from 16 mm diameter - 1x VDI 40 holder + drill 38 mm diameter - 1x VDI 40 holder + back turning tool from 47 mm diameter Dkedpfx Aowuq A Esa Iou - 1x VDI 40 holder + axial parting-off tool - 3x VDI 40 holder - 1x VDI 40 plug Weight: 30kg

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Djdpfx Aaoy Hl Iye Ieku Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: good (used), Year of construction: 2017, For sale / on request: Dodpfxoy Rkrre Aa Isku - Kaak Driem line 1 - Kaak Proofer + Euroclima - Kaak Driem line 2 - AMF / Den Boer oven (direct high-temperature fired oven) - Stelram conveyors - Cooling tunnel + ICS chiller - 2x ABB pick and place robots - 2x Fuji packaging machines Total working width: 1200 mm Year of construction: 2017 Documentation and software available. Inspection on location possible. For any questions or remarks, feel free to contact us.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 20,000 rpm, Fanuc control system 2 tables, 1100 x 600 mm 40-tool changer BT40 spindle Maximum spindle speed: 20,000 rpm Dodsy Ndlpopfx Aa Ioku 2 chip conveyors

Condition: good (used), Year of construction: 2010, Used 6-meter CNC drilling machine by CMA Type: TRD 40 CNR 6000 Table length: 6000 mm Table width: 600 mm Max. drilling diameter: 40 mm Flow drill option Dkedszz N T Tjpfx Aa Iju Cooling system Year of manufacture: 2010

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Colour: Grey Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 Dodpfxozr Inwe Aa Ieku - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 496,296 km, first registration: 12/2013, fuel type: diesel, number of seats: 38, next inspection (TÜV): 09/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 118) First registration: 16.12.2013 496,296 km Engine: 6,871 ccm 213 kW / 289 hp Euro 5 EEV MOT valid until 12/2026 / Technical Inspection valid until 09/2027 Permissible total weight: 19,500 kg, unladen weight: 11,255 kg, payload: 7,245 kg Overall length: 11,895 mm x Overall width: 2,550 mm x Overall height: 3,225 mm Double doors at the front and rear Dsdez Id S Iepfx Aa Isku Driver's cab with door 38 + 2 emergency seats + 40 + 1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system via IBIS cash register Tires 275/70R22.5, approximately 50% tread all around 06/26/2025: Upper rear right wishbone replaced; 12/10/2025: Front left brake hose replaced Various signs of wear and tear, consistent with the vehicle's age Good overall condition Last inspection on 12/09/2024 at 448,298 km, next inspection due at 508,828 km Price: €12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Errors, typos, and prior sale are subject to change.

Condition: used, mileage: 573,064 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 117) First registration: December 16, 2013 573,064 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV Next inspection: 12/2026, TÜV (technical inspection): 06/2027 Permissible gross vehicle weight: 19,500 kg, unladen weight: 11,255 kg, payload: 7,245 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38+2 emergency seats + 40+1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Dodpfx Aaez Id Snj Ieku Fully automatic transmission Microphone 2 x electric mirrors + mirror heating 12-volt socket Emergency stop Stop-and-go brake Driver's seat ISRI with heating and ventilation Lawo Tires: 275/70R22.5, front approx. 80%, rear approx. 60/60% Small dent/scratch on the driver's side, center September 18, 2024: New radiator, June 23, 2025: New thermostat, flange below sealed, front axle brake pads replaced, September 16, 2025: Steering housing, star cover, water pump, crankshaft seal sealed Various signs of wear and tear, consistent with the age Good overall condition Last inspection at 555,260 km on July 15, 2026, next inspection at 615,260 km Price: €12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: good (used), Year of construction: 1997, Well-maintained, used column drill from Alzmetall. Model: Alzstar 40 Dodpfoz H T Euox Aa Isku Capacity: 40mm.

Condition: used, No. 04554 Granulator / cutting mill Alpine RO 40/63 Used Robust granulator / cutting mill for the size reduction of plastics, blown film and cables Motor power 22 kW Rotor width 630 mm Rotor diameter 400 mm Rotor knives: 5 rows with 3 knives each Stator knives: 1 row at the front and 2 rows at the rear, with 3 knives per row Maximum permissible speed of the drive shafts 560 rpm 2 inspection openings Screen hole diameter approx. 12 mm Feed opening approx. 630 x 300 mm LW Feed hopper dimensions approx. 850 x 600 mm LW The hinged screen holder allows easy screen changes and facilitates access for cleaning the machine and replacing the knives. Ideal for recycling applications (blown film, cables, plastics, etc.) and food processing (tea, spices, dried vegetables, etc.). Machine ready to plug in, incl. power cable and 63 A plug Transport dimensions machine approx. 1600 x 1500 x 1800 mm LWH, hopper approx. 1400 x 1200 x 800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Dedpfjz Iav Aox Aa Isku For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Year of construction: 2014, condition: not inspected (used), Ilapak Carrera 1000/40 Flowrapper Model Carrera 1000/40 Year 05- 2014 Serial Number 0640490091 Electric 400 V 50 Hz – 5000 watts Jaw width 250 mm Bar transfer conveyor through the jaws Infeed length 2.2 metres Dkedpjvkg A Ijfx Aa Ieu Overall length 3.95 meters Overall width 1.4 metres 1 x folding box 120 mm wide product 1 x folding box 140 mm wide product The Machine is in good working condition It is offered at a huge discount to clear it from our stock Price reduced by 50 %

Condition: used, Power supply: 380V, frequency: 50Hz, rated current: 25A, backup fuse: 35A, control voltage: 220V. Documentation available. Inspection possible by arrangement. Dkodpfxsz I Dcto Aa Isu

Condition: good (used), Used pillar drill from Bimak Model 40 Capacity 40 mm Dodjz H Uz Depfx Aa Ijku

Condition: good (used), Milk pipe fittings, milk pipe nuts, stainless steel fittings Dkodpfx Aaeb A Sn Ne Iou -Size: DN 40 -Nuts: 15 pieces available -Screw fittings: 30 pieces available -Price: complete -Weight: 14 kg

Condition: used, clear span: 2,700 mm, total length: 13,980 mm, total width: 1,050 mm, total height: 4,600 mm, Technical data for the pallet racking system: Racking system: Jungheinrich Type: Delta Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 13,980 mm Number of bays / racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Included in the scope of delivery: 06x Pallet racking uprights, used Material color: blue Profile dimensions: 80 x 55 mm Includes cross and diagonal braces, upright protectors and base plates The uprights are pre-assembled (welded frame) Height: 4,600 mm Depth: 1,050 mm 20x Pallet racking beams, used Material color: yellow Box profile: 120 x 50 mm Beam type: HN 120x30 Connector: 3 HK (hooks) Clear width: 2,700 mm 40x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out Dkjdpfx Ajz Nc Ikja Isu 24x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shims, used Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional desired transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table width: 584 mm, table length: 1,321 mm, table load: 1,815 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details. • X-axis rapid traverse: 18.0 m/min • Y-axis rapid traverse: 18.0 m/min • Z-axis rapid traverse: 18.0 m/min • Distance spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Max spindle torque: 122.0 Nm @ 2000 rpm • Table T-slot width: 14 mm Dksdpez Erwtefx Aa Iou • Table T-slot pitch: 80 mm Additional equipment • Included documentation: Manuals and CE Declaration of Conformity Technical Specification Taper Size BT 40

Condition: good (used), axle configuration: 3 axles, first registration: 04/2005, suspension: air, color: blue, Year of construction: 2005, Equipment: ABS, Brakes: drum brakes Empty weight: 5.420 kg Carrying capacity: 33.580 kg GVW: 39.000 kg Dedpfxoz Hdwbo Aa Ieku Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Extandable - Twist-locks = Remarks = Krone SD 27 / Conatiner chassis / 40 FT / BPW

Condition: used, axle configuration: 3 axles, first registration: 03/1992, color: other, Year of construction: 1992, Empty weight: 4.600 kg Axle 1: left 6 mm right 7 mm Axle 2: left 7 mm right 6 mm Axle 3: left 6 mm right 6 mm Dedpfxjzt R Rde Aa Ioku We have the possibility to stack trailers!

Condition: used, Year of construction: 1980, mit 50 Platten Plates maximum: 60 Plate formats: 400x400 Dkedpfxsz Ibbts Aa Ieu Platefilter features: Manual spindl dimension ca. 160x60x100 cm Distance between first plate and spindle approx ca. 120cm

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 20,544 h, load capacity: 7,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,900 mm, fork carriage width: 1,460 mm, fork length: 1,500 mm, total length: 5,000 mm, drive type: Diesel, construction width: 2,350 mm, Side loader Load center: 600 ISO class: FEM 4B Mast type: Telescopic Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/65-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Djdpfx Aez If Drja Ieku Rear tire size: 2 x 355/65-15 Rear tire condition: 20 - 40% Battery year of manufacture: 2007 Additional single hydraulic circuit, integrated fork adjustment device, full cabin with heater, DPF diesel particulate filter, 2 x work lights at the front.

Condition: used, Year of construction: 2007, operating hours: 15,936 h, Type of fuel: Electric Colour: Grey Empty weight: 6.777 kg Dimensions (LxBxH): 290 x 125 x 318 cm Lifting capacity: 4.000 kg Lift height: 491 cm Fork dimensions: 1.200 x 1.150 mm - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516327000881 - Operating hours: 15936 - Lifting capacity: 4000kg - Lifting height: 4910mm - Overhead clearance: 3180mm - Free lift: 0mm Dkedpfjymdx Nex Aa Isu - Fork length: 1200mm - Maximum fork width: 1150mm - Minimum fork width: 440mm - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Radio, Joystick, Heating, Work lights - Mast: Duplex - Drive: Electric - Battery information: - └ Capacity: 930Ah - └ Battery voltage: 80V - Transport dimensions: 2900mm x 1250mm x 3180mm (l x w x h) - Transport weight [kg]: 6777kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Dodpfxsy S Edxe Aa Isku Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), operating hours: 8,640 h, Maximum height 260 mm Turning length 600 mm Max. swing diameter over bed 400 mm Max. swing diameter over cross slide 225 mm Cross travel 260 mm Longitudinal travel 660 mm Spindle head DIN Size 140 h5 Spindle bore 68 mm Dksdpoz Icuzofx Aa Iju Speed range 25 – 4000 rpm Feed rate range, longitudinal and cross 0.5 – 5000 mm/min Rapid traverse, longitudinal and cross 9 m/min Tailstock taper MK 4 Tailstock quill travel 100 mm Main drive 22 kW Dimensions L x W x H approx. 3600 x 1720 x 1650 mm Weight 3200 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 • Electronic handwheel • RS 232 interface • Hydraulic 3-jaw chuck, diameter 200 mm • 12-station tool turret, manufacturer SAUTER, internal coolant supply, VDI 30, mounting bore Ø 30 mm, DIN 69880 • Articulated chip conveyor with coolant system • Electr. foot switch for hydraulic 3-jaw chuck and hydraulic tailstock quill • Various tool holders • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany