Used Eumach Eumach Fbe-4000 for sale (2,690)

Condition: good (used), Year of construction: 2013, machine/vehicle number: KA 046062, Offer 25357 Technical Data: Blodoxufxfopfx Ac Tol - Max. load capacity including work table: 4000 kg - Faceplate hydraulically tiltable: 0 - 180° - Hydraulic height adjustment of the faceplate - Faceplate with holes D 28 + threaded holes, Ø 1600 mm - Table travels in the last driven tilt angle or in the horizontal position - Rotational movement electrically hydraulically actuated, reversible (right/left rotation) - Min. / max. rotational speed: 0.1 - 1.4 rpm - Min. / max. table height in horizontal position: approx. 1040 / 2140 mm - Welding current transmission: approx. 600 A - Drive: 400 V - Manual remote control + electric footswitch - Space required: approx. W 2000 x H 1100 x D 3200 mm - Weight: approx. 5000 kg

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm Bljdpfsy Nd Siex Ac Tjl turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers Bledpfx Ajy Uzhfjc Tel For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: ready for operation (used), Year of construction: 2025, number of axes: 7, This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details. Bjdpozic Elefx Ac Tell - Technology: Steel Transfer Technology / Pulse MIG/MAG- Cobot / Robot Brand: Universal Robots- Cobot / Robot Model: UR10e- Cobot Year of Manufacture: 2025- Welding Table Brand: Siegmund (Extreme 8.7 series, perforated grid pattern)- Extraction Unit Brand/Model: Fumator Absaugtechnik / Minivac 200D- Extraction Unit Controls: Start, Stop, Filter Reset, Suction Power Regulation- Included Documentation: German User Manual (UR10e) and Heidenbluth documentation binders- System Configuration: Robot mounted on a linear 7th-axis track system running alongside the welding table- Additional Equipment: Welding torch, hose packages, integrated cable carrier chain (energy chain), control cabinet with main switch, teach pendant, shielding gas cylinder rack

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Bsdpfx Asrq D D Eoc Tsll Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available

Condition: ready for operation (used), Wingspan: 3950 mm Blodozp Iqgopfx Ac Tsl Overall height: 3650 mm Load capacity: 4000 kg without lifting device

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Blodpfjzwa Rbjx Ac Tel Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), Thompson mixer grinder 4000. All s/s. Bodpezrl Ihjfx Ac Toll

Condition: excellent (used), 514 USED Bun, roll line Koenig Mini Rex 4000. TECHNICAL DATA: - Power supply: 3x400V+N - Power: 1.3kW The price is a net price. Paid options available: transport. Blodpfjzwxurex Ac Tsl Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, tank capacity: 4,000 l, usable tank capacity: 4,000 l, total width: 1,600 mm, total height: 3,500 mm, wall material: stainless steel, manhole diameter: 400 mm, manhole location: top, 4,000 L Stainless Steel (Inox) Tanks * Quantity: 7 units available Specifications & Dimensions: Option 1 (2 units): Diameter: 180 cm, Height: 250 cm Bodpeyw Tp Hjfx Ac Tsll Option 2 (5 units): Diameter: 160 cm, Height: 360 cm (Can be shortened to 300 cm) Additional Equipment Filter Press: Seitz Orion 40/60 – 2 units

Condition: like new (used), Year of construction: 2022, operating hours: 2,574 h, functionality: fully functional, machine/vehicle number: Roboter 1073651 / Steuerung 3100062 / Lineareinheit 152938, load capacity: 210 kg, The KUKA KR 210 R2700-2 (QUANTEC-2) industrial robot system consists of a 6-axis robot with a 210 kg payload and a reach of 2701 mm, combined with a KR C4 controller and a KL 4000 linear unit measuring 12.50 m in length. The system is in used / like-new condition with only 2,574.03 operating hours. Manufactured between 2021 and 2022, this unit is suitable for applications such as material handling, welding, gluing, assembly, and large-scale automation. It comes equipped with software options including SafeOperation, GlueTech, ExpertTech, and Profinet MS, and is supplied with 3x 400V / 25A power. Bljdpfxjy Ntv Rj Ac Tel

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining Blsdpfx Acjy Saqgj Tol - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: used, Year of construction: 2009, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Manufacture: 2009 CNC Control: Global Control Plus Track width: 4,000 mm Bedjzmv Dcjpfx Ac Toll 2 x Plasma with Hypertherm HPR260 power source Travel length: 10 m 2 x oscillating conveying tables Size: 3 x 3 m each Without filter system 22726ä

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, travel distance X-axis: 560 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: SmoothG, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets 2; Indexing 1° increments • Control: Mazatrol SmoothG • Coolant/air: Through-spindle cooling 32 bar; Through-spindle air supply; Niagara flushing • Functions: Tapping without compensating chuck (rigid tapping); G00 tilt function Bledsx Enllspfx Ac Tjl • Compliance: CE marking Additional equipment • Renishaw OMP 60 touch probe • Renishaw Inspection+ (Version 2022) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper Size SK 40

Condition: used, fuel type: diesel, overall weight: 8,500 kg, tire size: 14.5 R20 137G, axle configuration: 4x4, gearing type: mechanical, total length: 6,895 mm, total width: 2,400 mm, total height: 3,365 mm, Year of construction: 2014, Mercedes-Benz Unimog U 4000 4x4 | Year of manufacture 2014 | 177 hp | Excellent condition For sale is a Mercedes-Benz Unimog U 4000 4x4 with all-wheel drive. Vehicle data Manufacturer: Mercedes-Benz Model: Unimog U 4000 Type: UHN-452 Bledpfx Acjzxtfns Tjl Year of manufacture / First registration: 06.10.2014 Chassis number (VIN): WDB4374261V237083 Engine: Mercedes OM 904 LA Power: 130 kW / 177 hp Displacement: 4,249 cm³ Fuel: Diesel Transmission: Manual transmission Drive: All-wheel drive 4x4 Axle configuration: 4x4 (2 axles, both driven) Maximum speed: 90 km/h Number of seats: 3 Color: Blue Wheelbase: 3,850 mm

Condition: excellent (used), functionality: fully functional, AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system Bodjwlzz Tepfx Ac Tell technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n.2 motors of 0.55 Kw at 12000 rpm supplied, in addition, n.02 tilting trimming and cornering groups. n.2 motors Kw 1,15 at 12000 rpm 6. glue scraper group for cleaning glue residues supplied with 2 glue scraper groups, as spare parts 7. overlapping brush group for brushing and polishing the applied edges - n.2 motors at 1400 rpm , tiltable 8. dryer unit 0-600° - 1400 watt 9. contour trimming unit model STEFANI TRIM/60 . external unit HF high frequency converter volt. 380/50

Year of construction: 1986, condition: ready for operation (used), OFFERED FOR SALE DUE TO OVERCOMPLETION: Blsdpfxor Ezv Uo Ac Tol Well maintained second hand hydraulic press brake, brand LVD, equipped with front support Model PPN 125/4000 S630 Built in 1986 TECHNICAL CHARACTERISTICS Max. pressure force 1250kN Max. oil pressure 310bar Max. working length 4000mm Max. passage between the uprights 3150mm Max. stroke of the ram 150mm Distance table / ram 350mm Unloading 250mm Width of table 180mm Closing speed 90mm/s Working speed 7mm/s Return speed 55mm/s Motor power 10kW Approximate weight 13500kg Steered axes Y1,Y2,X STURING CNC TOUCH S-630 (New 2019) Very user-friendly Full touch screen (10") control with 2D graphic simulation controlled axes: Y,X,R cnc backgauge X-duo - R back gauge with 2 movable fingers ADDITIONAL TOOLS F10 H180 26° 7x508mm + 1x550mm in sections Multi-V M90 L4000mm Asking price excluding transport costs (for buyer). Note: only serious bids will be responded to!

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 Bljdpfx Aezl D Exoc Tjl X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Bsdpfxjyqybbj Ac Tell Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: used, Year of construction: 2020, turning diameter max. 3.800 mm diameter of spindle flange 1.900 mm max. swing diameter 3.800 mm control 840 D sl Siemens turning speed range - main spindle max. 100 min/-1 power capacity - main spindel 200 kW max. Torque 67.000 Nm gear box 1:30 tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm max. tool diameter 120 mm 0 125 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm max. tool weight 20 kg max. tool length 400 mm x-axis 1: 2.800 mm x-axis 2: 3.200 mm z-axis 1.000 mm rapid traverse X: 32 / Z: 20 m/min feed power X/Z: 22 kN total power requirement 280 kVA weight of the machine ca. 155 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC Vertical Turning Machine PITTLER - PV 4000 - Control Expansion / Software SINUMERIK 828D/840D SL ProgramSYNC Software Option - 12-Jaw Compensating Chuck by RÖHM - Retractable Step Guards - Coolant Circulation Bedpfx Aeyrhl Dsc Toll - Coolant Conditioning - Oil Hose Skimmer - SIEMENS Safety Integrated - Network Interface / Data Transfer DNC Option - Remote Diagnostics for NC Functionality - Teleservice for Integrated PLC of the Sinumerik 840D - Ethernet Connection in the Control Cabinet - Variable Speed ??Range to Reduce Vibration - Air Purifier, Electrostatic Discharge - Probe for In-Process Workpiece Measurement - Walk-in Work Area

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display Bledpfezndq Hsx Ac Tel * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150 152, total height: 6,615 mm, ram adjustment: 200 mm, installation height: 800 mm, table height: 1,000 mm, total width: 3,210 mm, total length: 5,140 mm, table length: 3,000 mm, table width: 1,400 mm, pressing force: 400 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 1,100 mm, distance between side stands: 1,100 mm, distance between stands: 3,020 mm, overall weight: 100,000 kg, year of last overhaul: 2025, ATTENTION: The machine is currently disassembled. Individual components can be inspected. Bjdpfjw H Ag Tjx Ac Toll Before delivery in 2026/2027, the machine will be completely overhauled mechanically and electrically. Pressing force: 4000 kN Adjustable stroke: 50 - 300 mm Ram adjustment: 200 mm Stroke rate: 15 - 60/min Working height: 800 mm Table dimensions: 3000 x 1400 mm Ram dimensions: 3000 x 1200 mm New control system: SIEMENS S7 1500 series

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Bledpfezlic Nox Ac Tsl Max weight 3.000Kg per stack Max height stack

Condition: used, This listing is for the Hanwell 4000 Wireless Transmitter The unit is in full working condition and is ready for immediate release Key Features: Single & Dual Channel Options: Choose between single or dual thermistor channels to suit your monitoring needs. ​ LCD Display: Equipped with an LCD display showing real-time data readings and battery life. ​ Temperature Range: Measures temperatures from -40°C to +60°C, accommodating various storage conditions. ​ Long-Range Wireless Transmission: Utilizes low-power radio technology with a transmission range of up to 3 km over open ground. ​ Battery Life: Powered by a 3.6V AA lithium battery​ Memory Capacity: Stores up to 100,000 readings for single-channel units and 50,000 readings per channel for dual-channel units. ​ Applications: Ideal for monitoring temperatures in fridges, freezers, and chillers. ​ Compatible Sensors Bsdpfjxv D H Rsx Ac Tsll The transmitters are compatible with various thermistor probes, available separately, to meet specific monitoring requirements. ​ Specifications at a Glance Feature Specification Dimensions 110 x 80 x 35 mm Weight 200 grams Power Supply 3.6V AA Lithium Battery Battery Life Up to 2 years Operating Range 0°C to +60°C (non-condensing RH environment) Storage Range -40°C to +60°C Accuracy ±0.1°C Radio Frequency 433–458 MHz (country-specific) Radio Power 10 mW Radio Range Up to 3 km over open ground IP Rating IP30

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Bodpfx Acozavlue Tsll Table size (2) 1100x600 + 850x600 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.