Used Containerbau Diverse Abrollcontainer 13 M³ Bis 40 M³ for sale (83,674)

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Pgodpfxoziyb Rs Ac Aot Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz Pgodpfjzizk Hjx Ac Aot - Rated power: 95 kW - Rated current: 150 A

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Pgodpfjzq Iu Isx Ac Aot Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose guides / eactive Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: new, maximum load weight: 28,840 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, loading space volume: 50 m³, Equipment: ABS, Example: STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. ----Example: high-quality aluminum chassis with high-strength steel body, ACTUAL 7,160 KG, Chassis with 3x9-ton axles, DCA, with 430mm disc brakes, 6x steel rims, Pgodpjhfiqcsfx Ac Ast 1st axle as a lift axle with starting assist, aluminum drop-side supports (can be uncoupled when loaded), foldable underrun protection, digital load gauge as axle load indicator, toolbox, extension ladder, Body made of HB450 steel sheets, floor 5mm, side walls and rear doors made of 4mm HB450 steel sheets, split rear doors 1/2 - 1/2 with a grain slide on the right, secondary release for the rear doors, doors sealed with round steel (sealing with rubber seal possible - mud-proof), tarpaulin with a rod in the middle, aluminum mudguard to protect the roof tarpaulin during loading, platform standing on the frame, EdBro tipping cylinder with long sleeve, loading height = 3,650 mm, (the vehicles shown may include some special equipment) ----Further equipment details and a detailed vehicle offer are available on request, various loading volumes, vehicle lengths and heights possible, Painting and equipment according to customer's request +500 EUR delivery costs Offers and images are subject to change.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2032, mileage: 374,970 km, power: 324 kW (440.52 HP), first registration: 09/2015, fuel type: diesel, empty load weight: 10,620 kg, overall weight: 20,500 kg, tire size: 315/80/22.5, axle configuration: 4x2, wheelbase: 3,650 mm, next inspection (TÜV): 02/2026, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: ABS, additional headlights, air conditioning, car registration, cruise control, differential lock, hydraulics, low noise, navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, TGS 18.440 BL , ZF manual gearbox , !!! NEW CLUTCH !!! , Meier Ratio ( Palfinger ) AK 13 M body with automatic container securing , cab and radio remote control , NAVI , lane departure warning , distance assistant , headlight cleaning system , reversing camera , German vehicle from 1st hand We deliver to any German seaport . Podjq E N T Ejpfx Ac Aogt Sale only to traders and under exclusion of any warranty

Condition: good (used), Various standard and powered tool holders in different designs for VDI 20, 30, 40, 50, and 60. Please specify the VDI size you require when submitting your inquiry! Pedpfx Aobql T Eoc Ajgt Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Weiss Type: WT3-1000/40 Weiss temperature test chamber with S!MCON / 32 control system, water-cooled Control panel: “Touch panel” The “Touch panel” control panel allows all control and operating commands to be executed simply by touching the function symbols. Adjustable feet To compensate for unevenness in the floor and to ensure sufficient ventilation of the machine, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed in the test chamber. Feedthrough installed as standard R1: 125 mm L1: 50 mm Test chamber volume: approx. 990 liters Pjdpfjzgbt Njx Ac Ajgt Test chamber dimensions: height 950 mm, width 1100 mm, depth 950 mm External dimensions: height 2000 mm, width 1415 mm, depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 4500 W Data for operation: Test chamber lighting: halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A, rated power 11.5 kW Fuse on customer side: 32 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front, 1 m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2008, color: green, mileage: 1,001 km, first registration: 01/2008, gearing type: other, driver cabin: other, Vehicle location: in transit. Body: approx. 20 roll-off containers from approx. 38m³ to approx. 40m³, reinforced for metal, approx. 20 roll-off containers from 38m³ to 40m³. Reinforced for scrap metal, year of manufacture approx. 2008 to approx. 2013. Price depending on condition from €3,500.00 net to €4,500.00 net. All information without guarantee, as the units are in transit! Specifications of accessories are given without guarantee, subject to changes, prior sale, and errors! Pgsdpfxjy Erz Ro Ac Ast

Year of construction: 2020, condition: excellent (used), ESPEC PL-4J Climate Testing Chamber / Temperature Testing Chamber Manufacturer: ESPEC Corp. Type: PL-4J Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2020 For sale is a used temperature and climate testing chamber from the manufacturer ESPEC. The device is suitable for temperature and climate testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. Technical Data Manufacturer: ESPEC Corp. Type: PL-4J Temperature Range: -40 °C to +100 °C Humidity Range: 10 to 98 % RH Test Chamber Volume: approx. 800 liters Heating Rate: approx. 3 K/min Cooling Rate: approx. 2 K/min Internal Dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External Dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Power Connection: AC 400 V / 3~ / 50 Hz Max. Power Consumption: 21 A Pgsdpfxszntxms Ac Ajt Weight: approx. 610 kg Refrigerant: R452A Refrigerant Quantity: 1.16 kg + 0.36 kg Features Touchscreen Control Temperature and Humidity Control Program Control Stainless Steel Interior Viewing Window Interior Lighting 100 mm Cable Entry Water-Cooled Condenser Rollers for Easy Transport Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Quality Assurance Electronics Testing Research and Development Endurance and Aging Tests Workshop Testing The climate chamber has been workshop-tested. Functional test carried out. Humidity system repaired. Documented test run successfully completed. Scope of Delivery ESPEC PL-4J Climate Testing Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Note Collection or shipping via freight forwarder possible by arrangement. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), ESPEC PL-4J Climate Testing Chamber / Temperature Testing Chamber Manufacturer: ESPEC Corp. Type: PL-4J Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2018 For sale is a used temperature and climate testing chamber from the manufacturer ESPEC. The device is suitable for temperature and climate tests, environmental simulations, material tests, quality assurance, as well as development and stress tests. Technical Data Manufacturer: ESPEC Corp. Type: PL-4J Temperature Range: -40 °C to +100 °C Humidity Range: 10 to 98 % RH Test Chamber Volume: approx. 800 liters Heating Rate: approx. 3 K/min Cooling Rate: approx. 2 K/min Internal Dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External Dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Power Connection: AC 400 V / 3~ / 50 Hz Max. Power Consumption: 21 A Weight: approx. 610 kg Refrigerant: R452A Refrigerant Quantity: 1.16 kg + 0.36 kg Equipment Touchscreen control Temperature and humidity control Program control Stainless steel interior Viewing window Interior lighting 100-mm cable gland Water-cooled condenser Castors for easy transport Application Areas Temperature testing Climate testing Pgjdszntunepfx Ac Ajt Environmental simulation Material testing Quality assurance Electronics testing Research and development Endurance and aging tests Workshop testing The climate chamber has been workshop tested. Functional testing performed. Humidity system repaired. Documented test run successfully completed. Scope of Delivery ESPEC PL-4J Climate Testing Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Note Collection or shipping by freight forwarder is possible by arrangement. Subject to changes, errors and prior sale.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & emergency hand pump, steel side panels Equipment: Pjdpfx Ajzy Dcaec Aegt - All-steel floor - Steel side panels Net: €6,378.15 / Gross: €7,590.00 Article number: HTK230311740.01 Technical data: • Brand: Humbaur • Model: HTK 3000.31 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 313 x 174 x 40 cm • External dimensions (L x W x H): 455 x 191 x 126 cm • Loading height of the floor: 75 cm • Permissible total weight: 3,000 kg • Tare weight: 940 kg • Payload: 2,060 kg • Chassis: High-loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Double-walled steel side panels • All side panels can be folded down and removed • Steel corner posts can be removed • Rear flap can also be pivoted • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side panel attachments or front wall extension • Sturdy toggle closures • All-steel floor - extremely robust • Very stable, screwed V-drawbar, REINFORCED • Very stable steel frame welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts welded throughout • Electric hydraulics for tipping with battery in the box and cover • 71AH battery • Battery is charged via a 13-pin connector from the towing vehicle (all pins of the socket must be connected) • External battery charging socket for 230V charger • Emergency hand pump for manual tipping when the battery is empty • 6 lashing eyes recessed inside in the side edge (800DaN/kg) TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Ramp rail shaft as preparation for aluminum rails for easy retrofitting • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: good (used), V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 5-stage Ø 40 to 90 mm Psdpfx Acow U Ty Es Aogt -Hole: Ø 14 mm -Number: 6x pulley available -Price: per piece -Dimensions: Ø90 x 55 mm -Weight: 0.8 kg/piece

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: Pgjdpfxjum Hufs Ac Ajt * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & emergency hand pump, steel sideboards Equipment: - Steel sideboards - All-steel floor Net: €7,016.81 / Gross: €8,350.00 Article number: HTK235311740.01 Technical data: • Brand: Humbaur • Model: HTK 3500.31 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 313 x 174 x 40 cm • External dimensions (LxWxH): 455 x 191 x 126 cm • Loading height of the floor: 75 cm • Permissible total weight: 3,500 kg • Tare weight: 1,010 kg • Payload: 2,490 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION Psdpfx Aszy Dw Rsc Asgt • Fuhrmann profile sideboards made of hot-dip galvanized all-steel sideboards • All sideboards can be folded and removed • Steel corner posts removable • Rear flap can also be pivoted • Insertion option at all 4 corners for tarpaulin frames, lattice attachments, sideboard attachments or front panel extensions • Stable angled lever locks • All-steel floor - extremely robust • Very stable, screwed V-drawbar, REINFORCED • Very stable steel frame welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded • E-hydraulics for tipping with battery in the box and cover • 71AH battery • Battery is charged by the towing vehicle via a 13-pin connector (all pins of the socket must be occupied) • External battery charging socket for 230V charger • Emergency hand pump for manual tipping in case of empty battery • 6 lashing eyes recessed inside in the side edge (800DaN/kg) TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO over-run device and parking brake • Ramp guide as preparation for aluminum ramps for easy retrofitting • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about any special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years - Errors, omissions and prior sale are reserved -

Year of construction: 1989, condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from Battenfeld injection molding machine -Type: MOD13/1X014-088 Pgjdjqgi Ipspfx Ac Ast -Contr: TDM 3.2-30-300-W0 / TVM 2.1-50-W1-220 -Quantity: 1x servo controller available -Dimension: 390/105/H325 mm -Weight: 15,1 kg

Condition: used, maximum load weight: 7,390 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 02/2004, next inspection (TÜV): 12/2025, loading space length: 13,410 mm, loading space width: 2,500 mm, loading space height: 2,640 mm, loading space volume: 89 m³, Year of construction: 2004, Equipment: ABS, KRONE 2-axle INSULATED box trailer, 13.40 m, with portal doors * Permissible total weight 29,000 kg = payload approx. 21,840 kg * New TÜV inspection possible for an extra charge * Vehicle number for customer inquiries: 3271 * ABS * Eberspächer cargo area heater * BPW axles * 2-axle * EBS, Wabco No liability for printing and typographical errors Sale only to commercial businesses Errors and prior sale excepted* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The description according to the purchase agreement is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer Guarantee insurance possible upon request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our partners on site * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * Pgedpjkf Snxofx Ac Aot ---- Visit us on our website at * Constantly over 200 vehicles in stock

Condition: used, maximum load weight: 7,390 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 02/2004, next inspection (TÜV): 12/2025, loading space length: 13,410 mm, loading space width: 2,500 mm, loading space height: 2,640 mm, loading space volume: 89 m³, Year of construction: 2004, Equipment: ABS, KRONE 2-axle INSULATED box trailer, 13.40 m, with portal doors * Permissible total weight 29,000 kg = Payload approx. 21,840 kg * New TÜV inspection possible for an extra charge * Vehicle number for customer inquiries: 3271 * ABS * Eberspächer cargo area heater * BPW axles * 2-axle * EBS, Wabco No liability for printing and typographical errors Pedpfx Aokf Snqec Aegt Sale only to commercial customers Subject to errors and prior sale* Changes, prior sale, and errors expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer Guarantee insurance possible upon request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL fees for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Folding front panel, off-road 185/70R13C tires, roof rails Equipment: - 6 lashing eyes - Aluminum side panels - V-shaped drawbar Net price: €1,983.19 / Gross price: €2,360.00 Article number: HAK113251340.01 Technical data: • Brand: Humbaur • Model: HA 132513 KV Offroad • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 251 x 131 x 40 cm • External dimensions (LxWxH): 379 x 185 x 97 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,300 kg • Unladen weight: 270 kg • Payload: 1,030 kg • Chassis: Low-bed trailer (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • Screen-printed wood floor, continuous without joints, non-slip and waterproof • Rear side panel folds down • Front side panel folds down • Long lever locks flush with the side panel • Continuous longitudinal beams • Frame completely hot-dip galvanized • V-shaped drawbar • Plastic fenders • Option to insert at all 4 corners for tarpaulin frames, grille attachments, side panel extensions, or front panel extensions • 6 lashing brackets inside on the side edge (certified 400 kg/dAN) • Maintenance-free rubber spring axle from ALKO • Reverse automatic • ALKO overrun device and parking brake • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Pgjdpfx Acszy Af Ts Ast Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 23,460 kg, Year of construction: 2023, operating hours: 420 h, KLEEMANN MS 13 Z Robustly built, mobile, two-deck screening plant with a capacity of up to 300 t/h, suitable for feed material with an edge length of up to 400 mm. The plant can be used equally well in natural stone and recycling applications. Manufacturer: Kleemann (Wirtgen Group) Type: Mobiscreen MS13Z Year of manufacture (first registration): 04.07.2023 Engine power: 100 kW Operating hours (recorded): 416 h Feed capacity: up to approx. 300 t/h Feed size: max. 400 mm Feed height (with extension): 3,395 mm Hopper volume (with extension): 6 m³ Screening unit type: Double-deck vibrating screen Screening unit upper deck width x length: 1,370 x 3,660 mm Screening unit lower deck width x length: 1,370 x 3,455 mm Drive concept: diesel-hydraulic (Caterpillar) Transport width: 2,500 mm Transport length: 12,775 mm Transport height: 3,200 mm Transport weight: 23,460 kg Pgodszz S Eljpfx Ac Ajt Used machinery sold without warranty.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: 2451458, load capacity: 750 kg, lifting height: 26,200 mm, platform length: 5,600 mm, platform width: 1,300 mm, overall weight: 18,770 kg, transport length: 5,600 mm, transport width: 1,320 mm, transport height: 4,100 mm, fuel type: electric, color: blue, Equipment: all wheel drive, differential lock, Technical Specifications - Year of manufacture: 2008 - Drive: Electric 4WD - Working height: 28.20 m - Platform height: 26.20 m - Platform extension: 2.20 m - Load capacity: 750 kg - Platform dimensions (L x W): 5.60 x 1.32 m Pgedpfxozmdxue Ac Aot - Overall dimensions (L x W x H): 5.60 m x 1.32 m x 4.10 m - Total weight: 18,770 kg - Load capacity: 750 kg - Travel speed: 0.5 - 2.3 km/h - Max. gradeability: 25% All-wheel drive, all-wheel steering, foldable guardrail, fully functional, normal signs of use.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 518 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 1,730 mm, fuel type: diesel, mast type: triplex, construction height: 2,600 mm, power: 55 kW (74.78 HP), drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Rear tire type: Superelastic Description: without clamp !!! Pgsdpfx Asw Umh Njc Ast 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, full free lift, CE certificate, scale, LED, radio

Condition: good (used), Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release -Clamping range: Ø 40 to 180 mm, see photos -Dimensions: 230/120/H310 mm -Weight: 3.5 kg Podpfx Ajw Upx Rsc Aogt

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 9,325 mm, loading space width: 2,470 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, ## Customized Transport Solution Pgsdpfezhgp Sex Ac Aet Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction (basic lightweight design) * Patented curved front end design * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate, including thrust compensations * Spare wheel carrier for 1 spare wheel including mounting kit * Spare wheel matching the original tyres, mounted on steel rim * Lockable plastic toolbox with drawer and shelf insert (650 × 520 × 670 mm, W × H × D) * Tarpaulin support bar with holder * Rear towing hooks ## Axles & Suspension * Disc brake axles with 430 mm brake discs * Off-road axle specification * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded piping for easy maintenance * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front * EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * LED licence plate lighting * Yellow LED side marker lights * White LED front position lights (2 units) * White/red LED rear outline marker lights (2 units) * 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables) * Additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Aluminium Box Body (40 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed for improved material discharge resistance * Internal access ladder at front wall * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Rear Door System * “Membrane” tailgate design * Pendulum rear door with double-joint hinge system * Externally mounted with double hook locking system * Rubber-sealed tailgate * Central grain slide gate ### Floor & Equipment * Continuous 6 mm aluminium floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction)

Condition: like new (used), Blockhouse profile cutter, with teeth on the back. Pjdpfx Ajzvzu Sec Aogt

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2450788, load capacity: 350 kg, mast type: telescopic, lifting height: 11,800 mm, platform length: 2,190 mm, platform width: 1,060 mm, overall weight: 2,985 kg, transport length: 2,400 mm, transport width: 1,190 mm, transport height: 2,210 mm, fuel type: electric, tire size: 16x5x12, color: red, Technical data Year of manufacture: 2018 Motor: Electric 2WD Psdpfsyyt Stex Ac Ajgt Working height: 13.80 m Platform height: 11.80 m Platform extension: 0.90 m Platform dimensions (L x W): 2.19 m x 1.06 m Overall dimensions (L x W x H): 2.40 m x 1.19 m x 2.48 m Load capacity: 350 kg Total weight: 2985 kg Gradeability: 25% Turning radius (outside): 2.58 m Travel speed: 1.0 - 3.2 km/h Tyres: Solid rubber Tyre size: 16 x 5 x 12 Fully functional, general signs of use.