Used Network for sale (783)

Condition: used, “functionally tested; item comes from the dismantling of equipment from an automotive supplier” Quantity: 12 units available Manufacturer: LunaIP Model: L-SA-5203 Type: IP security camera Resolution: 5 megapixels Lens: 2.8–12 mm motorized varifocal lens Night vision: IR LED, range up to 40 m Video formats: H.265 / H.264 Protection rating: IP67, IK10 Power supply: Power over Ethernet (PoE, IEEE 802.3af) Features: Motion detection, WDR, 3D-DNR, metal housing Chjdpfszlt Tfjx Ad Iec

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Chjdpfx Aez An S Red Isc Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Chsdpfx Aszzaxaed Ijc Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Condition: used, Industrial security appliance for protecting and segmenting automation networks. Suitable for use in production facilities, machine controls, and industrial Ethernet networks. Manufacturer: Phoenix Contact Series: FL MGUARD Type: RS4000 TX/TX Product type: Industrial security router/firewall Condition: used Quantity: 1 Communication standard: Industrial Ethernet Ports: 2 × RJ45 Ethernet TX Transmission rate: 10/100 Mbit/s Chjdpozduzhsfx Ad Iec Function: Firewall, VPN, network segmentation Mounting type: DIN rail Protection class: IP20 Diagnostic functions: LED status indicators Application area: Industrial network security, remote maintenance, machine and system communication

Year of construction: 2018, condition: ready for operation (used), overall weight: 4,100 kg, total width: 1,810 mm, total height: 2,780 mm, pressing force: 76 t, product length (max.): 7,060 mm, stroke length: 160 mm, Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details. Cedpfxoz E Igwj Ad Iohc - Max. Installation Height: 885 mm- Min. Installation Height: 725 mm- Throat Depth: 250 mm- Ram Speed "DOWN": 2 - 30 mm/s- Ram Speed "UP": 15 - 68 mm/s- Press Table Height above Floor (with / without oil pan): 730 / 700 mm- Usable Shaft Length: 3000 mm- Usable Shaft Diameter: ø 120 / ø 170 mm- Straightening Bridge Length: 2000 mm- Extension Bed Extension: 2 x (1010 + 1520 mm) / Attached tables 2.5 m length each- Main Pump Drive Power: 7.5 kW- Network Type: L1-3/N/PE (TN-S)- Frequency: 50 Hz- Operating Voltage: 400 V~- Connected Load: 9 kVA- Nominal Current: 14.5 A- Supply Line / Fuse: 32 A CEE / 32 A- Hydraulic Tank Capacity: approx. 280 Liters- Weight (without tools and additional equipment, without hydraulic oil): approx. 4100 kg- Emission Sound Pressure Level Lpa: 78.5 dB(A)- Uncertainty Kpa: 8 dB(A)

Condition: good (used), functionality: fully functional, Steinheil KONTUR 408-2/D Optoelectronic Contour and Shaft Measurement System High-precision Steinheil KONTUR 408-2/D optoelectronic contour and shaft measurement system with high-quality Jenoptik optics The system is designed for non-contact, high-precision, and rapid measurement of rotationally symmetric components (e.g., shafts, camshafts, turned parts) The device scans the measurement object non-contact using the shadow image principle. Rotational measurements are recorded with up to 1,440 measurement points on the circumference per measurement location. Evaluation and quality control are performed directly via integrated SPC (Statistical Process Control) software based on Windows NT, featuring clear tolerance bars and diagrams The system is housed in a closed aluminum profile enclosure with a transparent protective cover and is safeguarded by professional safety light curtains System Overview Operating Principle: It scans workpieces non-contact using the shadow image principle. Main Application: Fast and precise measurement of complete workpiece contours and shafts in industrial settings. The Measuring Unit (KONTUR 408): Vertical measuring setup with integrated IR LED illumination and sensor technology Measuring range: Diameters from 4 to 85 mm, workpiece lengths up to 400 mm Drive & scales: Brushless servo motors and high-precision Heidenhain scales The device is housed in a sturdy aluminum profile frame with transparent protective panels and Sick safety light curtains. The control& IT Infrastructure: A rugged 19-inch control cabinet (Rittal) houses the VME bus process computer. A separate PC workstation controls data analysis and visualization (historically designed for Windows NT). A wide range of standard interfaces on the rear panel (including RJ-45 network, serial COM ports, parallel LPT2 printer port, AUI interfaces, and BNC coaxial connectors) Technical Specifications: Manufacturer: Steinheil Model: KONTUR 408 Cjdpfozz Hwvox Ad Ishc Diameter measurement range: 4 mm to 85 mm Length measurement range: up to 400 mm Diameter resolution: < 0.5 µm Length resolution: 0.5 µm Rotation resolution: 0.018° Measurement Accuracy (at 20°C): Diameter: ± 2 µm; Length: ± [5 + L [mm] / 100] µm Sampling Rate (Scans): 2,000 per second / 5,000 per mm Measurement Times: 10 to 50 seconds (depending on the number of test features) Measuring Systems / Scales: High-quality Heidenhain scales (length & rotation) Drive System: Brushless DC servo motors (controlled via Elmo NBA 10/200RH amplifiers) Process Computer: VME bus computer in a Rittal cabinet Data Analysis/Visualization: PC workstation (designed for Windows NT) Illumination: IR LED system (service life approx. 50,000 hours) Protection rating: IP 54 Operating temperature: +10 °C to +45 °C Dimensions (W x H x D): approx. 590 x 900 x 380 mm Weight: approx. 100 kg (plus peripherals/cabinet) Installation: Desktop unit / tabletop setup “Everything from a single source: We’d be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Csdpoykt N Ssfx Ad Iohc Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm Cjdpsx H T H Refx Ad Iohc - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Year of construction: 2017, condition: used, Used machine Chodpfszu T Smjx Ad Ioc Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Cjdpfozt Twysx Ad Iehc Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Codpjz Hb Nbsfx Ad Iehc

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive Chodpezlz Svofx Ad Isc o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 19,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2019, functionality: fully functional, total height: 3,000 mm, total length: 4,850 mm, total width: 2,780 mm, overall weight: 12,500 kg, Technical Data BA one 6 CNC Control: SINUMERIK 840D sl Working Area X-axis: 600 mm Y-axis: 650 mm (adjustable to 925 mm) Z-axis: 500 mm Workpiece Clamping: A/U Swivel carrier/counter bearing with helical gearing: Swivel time 0/180°: approx. 3.5 s A and U axes, prepared for mounting of clamping bridges, up to max.: Ø 725 mm x 830 mm Drive system: Torque motor Transport load: 2 x 450 kg Speed range A/U axis: 10 - 50 min-1 C/W axis, single*: can be upgraded to modular A/U Transport load C/W: 150 kg each Main Spindle: HSK-A63 Speed range / acceleration time 0 - nmax: 1 - 17,500 min-1 / < 0.7 s Spindle bearing Ø: 80 mm Power / torque (40% ED): 35 kW / 80 Nm Feed Drive Drive system: Linear motor Rapid traverse X / Y / Z: 100 / 120 / 100 m/min Cedpfxezz N Tgo Ad Ishc Axis acceleration X / Y / Z: 10 / 12 / 22 m/s² Max. feed force X / Y / Z: 8,000 / 16,000 / 8,000 N Accuracy Path measurement: Direct, absolute Position tolerance X / Y / Z: Tp = 0.006 mm Tool Magazine Tool changing system: Pick-up Capacity: 30 (60)* (105)* (155) (*optional, upon request) Max. tool Ø: 85 mm / 160 mm (-o-) -o- multiple magazine slot occupancy Max. tool length: 450 mm Max. tool weight HSK-A63: 10 kg Tool change: Chip-to-chip time approx. 2.5 s Weight / Dimensions Machine weight: approx. 12,500 kg Transport dimensions W x H x D: 2.78 m x 3.00 m x 4.85 m Installation dimensions W x H x D: 3.75 m x 3.75 m x 7.4 m Connection power Operating voltage: 3 x 400 Volt, 50 Hz, TN-S/TN-C network Total connection power: 100 kVA Average air consumption: 0.4 Nm³/min (5.5 bar) 2 + 1 machines are available. The machines were integrated into an automation system. They were loaded by a robotic system. They were connected to a central coolant system. Therefore, these machines do not have their own coolant system. Chips were also disposed of via a central system.

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,500 mm, total length: 5,900 mm, total width: 4,000 mm, SW Swabian Machine Tools BA W08-22 CNC control system: Siemens SINUMERIK 840 D sl Work area X-axis: 800 mm Y-axis (swiveling): 900 mm (1,200 mm) Z-axis: 660 mm Spindle distance, fixed (variable)*: 800 mm (799 mm - 851 mm) Workpiece clamping Swiveling table/counter bearing with helical gearing: swiveling time 0/180°: approx. 5.0 s A- and U-axes, prepared for mounting of clamping bridges, up to max.: Ø 950 mm x 1,830 mm Drive system: Torque motor Transport load: 2 x 800 kg Speed range A-, U-axes: 1 - 40 min-1 Working spindle HSK-A80 Speed range: 1 - 12,500 min-1 Acceleration time 0 - nmax: < 0.9 s Spindle bearing diameter: 90 mm Power / torque (10% duty cycle): 2 x 42 kW / 2 x 200 Nm (10% duty cycle) Feed drive Drive system: Linear motor Rapid traverse X / Y / Z: 120 m/min Axis acceleration X / Y / Z: 11 / 11 / 22 m/s2 Max. feed force X / Y / Z: 2 x 8,000 / 16,000 / 2 x 8,000 N Accuracy Position measurement: Direct, absolute Position tolerance X / Y / Z: Tp = ≤ 0.006 mm Repeatability R (ISO 230-2) ≤ 0.004 mm Tool magazine Tool changing system: Pick-Up Capacity: 2 x 42 (2 x 70 / 2 x 91 / 2 x 126)* Max. tool Ø: 85 / 200 mm (-o-) Max. tool length: 550 mm Max. tool weight: 12 / 18 kg Tool change chip-to-chip time: approx. 3.00 s Weight / Dimensions Machine weight: approx. 24,000 kg Transport dimensions W x H x D: 4.00 m x 3.5 m x 5.70 m Installation dimensions W x H x D: 5.35 m x 4.20 m x 8.20 m Connection power Operating voltage: 3 x 400 Volt, 50 Hz, TN-S/TN-C network Total connection power: approx. 152 kVA Average air consumption: 0.6 Nm³/min (5.5 bar) Several machines are available. The machines were integrated into an automated system. They were loaded by a robot system. They were connected to a central coolant system. Therefore, these machines do not have their own coolant system. Chips were also removed via a central disposal system. Codpfjz D Ey Eox Ad Ishc

Condition: good (used), 3D Systems ProJet MJP 2500 Plus MultiJet 3D Printer Description: Professional MultiJet 3D printer / MJP system 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD printing mode For sale is a used professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for the production of precise plastic components, functional prototypes, concept models, as well as jigs and tool applications. Technical data: Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Printing modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD mode: 800 × 900 × 790 DPI Layer thickness: 32 µm UHD mode: 1600 × 900 × 790 DPI Layer thickness: 32 µm Dimensions: 1120 × 740 × 1070 mm (W × D × H) Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet USB Features: Integrated touch display Material system for build and support material Automatic material bottle switching Network connection USB port 3D Sprint software support Material containers as shown in the pictures Cjdpfx Aoz Erdaod Iehc Applications: Functional prototypes Concept models Form and fit testing Jigs and fixtures Tool applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Shipping by freight forwarder possible. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2000, Machine description This used Partenair S.MAX40/AC refrigerated compressed air dryer, built in July 2022 by Friulair, handles a nominal flow of 366 m³/h. It runs on single-phase 230 V, 50 Hz, draws 0.82 kW and uses R407C refrigerant. Maximum working pressure is 14 bar. The DMC 35 controller shows the dew point on an LED bar. A one-piece aluminium heat exchanger and an electronic condensate drain complete the unit. Dimensions: 555 x 580 x 885 mm, weight 54 kg. Applications This second-hand air dryer removes moisture from compressed air downstream of a screw or piston compressor of about 40 hp. It protects pneumatic tools, cylinders, valves and air networks in mechanical workshops, sheet metal shops, woodworking, packaging and paint lines (food processing with suitable filtration). Key features / Advantages Proportional capacity control keeps the dew point stable at any load. Pressure drop is low, below 150 mbar on average according to the manufacturer. The compact, light unit connects in 1.5 inch BSP and plugs into a single-phase supply. Friulair is a well-known Italian dryer manufacturer, sold in France under the Partenair brand. The 2022 build year and clean appearance make resale and installation easy. Used refrigerated air dryer for sale at All Metal, specialist in used industrial machinery. Height: 130 Length: 80 Chjdez H Ny Ijpfx Ad Ijc Depth: 160

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Fitotron® modular plant growth chambers, Type HGC 1014 V, incl. HQI-T and Krypton lighting module Temperature range +5°C to +45°C for temperature testing Test chamber volume approx. 1300 L Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers feature a modular design. Individual modules can be added or exchanged as needed, allowing the units to be adapted for various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption (without fresh air operation at 25°C / 75% RH): approx. 0.8 kW Specifications for climatic testing with irradiation Chsdpfjzpv Iaex Ad Isc Temperature range: +10°C to +45°C (with lights on) Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Humidification and dehumidification system; stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door unit with observation window Interface for computer connection Power supply: 3/N/PE 400V ±10% 50Hz CE marked, mobile, very good condition Cable/pipe port: Ø 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg (lighting module) Four units of this model are available for sale. Please feel free to contact us if you have any further questions.

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). Codpfxev Iaqyj Ad Iehc FUNCTION & APPLICATION The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Chjdpfxsz D Tnwo Ad Isc Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors Chedpfx Adov Sm Rue Ioc • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: used, Year of construction: 2014, functionality: fully functional, total height: 3,250 mm, total length: 5,200 mm, total width: 3,700 mm, overall weight: 20,000 kg, SW Swabian Machine Tools BA W06-22 CNC control: Siemens SINUMERIK 840 D sl Working area X-axis: 600 mm Y-axis (swiveling): 630 mm (920 mm) Z-axis: 510 mm Spindle distance, fixed (variable)*: 600 mm (590 mm - 651 mm) Workpiece clamping Swiveling table/counter bearing with helical toothing: swiveling time 0/180°: approx. 3.4 s A and U axes, prepared for mounting of clamping bridges, up to max.: Ø 675 mm x 1,430 mm Drive system: Torque motor Transport load: 2 x 600 kg (720 kg)* Speed range A, U axes: 1 - 50 min-1 Working spindle HSK-A63 Speed range: 1 - 17,500 min-1 Acceleration time 0 - nmax: < 0.65 s Spindle bearing Ø: 80 mm Power / Torque (40% ED): 2 x 35 kW / 80 Nm (40% ED) Feed drive Drive system: Linear motor Rapid traverse X / Y / Z: 120 m/min Axis acceleration X / Y / Z: 12 / 10 / 24 m/s2 Max. feed force X / Y / Z: 10,000 / 10,000 / 2 x 5,000 N Accuracy Path measurement: Direct, absolute Position tolerance X / Y / Z: Tp = 0.006 mm Tool magazine Tool changing system: Pick-up Capacity: 2 x 42 (2 x 72 / 2 x 108)* Max. tool Ø: 80 / 200 mm (-o-) Max. tool length: 425 mm Codpfozz Sdnox Ad Ishc Max. tool weight: 10 kg Tool change time, chip-to-chip: approx. 2.25 s Weight / Dimensions Machine weight: approx. 20,000 kg Transport dimensions W x H x D: 3.70 m x 3.25 m x 5.20 m Installation dimensions W x H x D: 4.80 m x 3.50 m x 7.50 m Connection power Operating voltage: 3 x 400 Volt, 50 Hz, TN-S/TN-C network Total connection power: approx. 133 kVA Average air consumption: 0.6 Nm³/min (5.5 bar) Several machines are available. The machines were integrated into an automation system. They were loaded by a robotic system. They were connected to a central coolant system. Therefore, these machines do not have their own coolant system. Chips were also removed via a central disposal system.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,712 h, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: 0i MD, table width: 510 mm, table length: 950 mm, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill B 800 was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 630 mm. The machine includes a table size of 950 x 510 mm and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the POSmill B 800 vertical machining centre we have for sale. Contact us for further details. Chsdpfxez Arl Is Ad Ijc - Control System: Fanuc 0i MD (Hartrol-Fanuc AI100 display interface)- Storage Capacity: 2+2 GB- Tool Changer: 24-fold ISO 40- Internal Coolant Supply (CTS): 20 bar with cartridge filter- Apparent Power: 25 kVA- Fuse Protection: 35 A- Voltage / Frequency: 400 V / 50 Hz (3-phase)- Power On Hours: 21,699 H- Run Time Hours: 10,712 H- Total Parts Count: 47,887- Standard Equipment: Active air-air control cabinet cooler, Ethernet network connection, regulated spindle cooler, opening left/right side windows, polycarbonate protective enclosure, external spiral chip conveyor, coolant head pump (M-functions), chip flushing pump & device, water gun, air gun, coolant at spindle, operating status light, electromechanical oil coolant separator, mobile electronic handwheel Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2011, functionality: fully functional, working width: 1,015 mm, cutting height (max.): 310 mm, cutting width (max.): 1,015 mm, FICEP KATANA K100 + K60 - TWO REFURBISHED STRUCTURAL-STEEL BAND SAWS | BUNDLE OFFER Two automatic Ficep mitre band saws of the Katana series: the K100 (year 2011, profiles up to approx. 1000 mm) and the smaller K60 (profiles up to approx. 600 mm). Both designed for economical cutting of solid material, profiles and tubes in steel and non-ferrous metals. AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT Both machines have been overhauled and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). FUNCTION & APPLICATION Automatic mitre band saws for profile processing in structural steelwork: beam, tube and flat material as well as solid material in steel, aluminium and non-ferrous metals. Motorised feed with infinitely variable cutting speed, hydraulic clamping systems, CNC-controlled mitre cuts and cutting programs. The K60 is additionally prepared for the DSTV data interface (import from CAD/CAM). Applications: steel fabrication shops, steel and semi-finished trading, industrial pre-fabrication. --- MACHINE 1: FICEP KATANA K100 (YEAR 2011) --- Horizontal CNC mitre band saw for large structural-steel cross-sections. Hydraulic blade tensioning, dual automatically pre-settable blade guidance, integrated cooling/lubrication. - Year: 2011 | Serial number: 33111 - Cutting width at 90 deg: 1015 mm | Cutting height at 90 deg: 310 mm - Min. profile size at 90 deg: 60 x 10 mm - Cutting width at +/-45 deg: 610 mm | Cutting height at +/-45 deg: 310 mm - Max. mitre angle: +/-60 deg - Saw blade: 7880 x 41 x 1.3 mm | Blade speed: 60-170 m/min - Blade motor: 9 kW | Control: Ficep CNC - Hydraulic blade tensioning, dual blade guidance (fixed/mobile side) - Synchronised cleaning brush, integrated cooling/lubrication system Chedowd Ugtopfx Ad Isc - Hold-downs and workpiece vices: hydraulic, independent --- MACHINE 2: FICEP KATANA K60 --- Horizontal CNC double-mitre band saw for medium cross-sections. Hydraulic horizontal and vertical clamping, minimum-quantity lubrication, Mitrol CNC with Pegaso software. - Year and serial number: on request (to be confirmed on the name plate) - Cutting range at 90 deg: 610 x 310 mm - Cutting range at 45 deg: 400 x 300 mm | at 60 deg: 250 x 250 mm - Mitre angle range: +45 / -60 deg | Min. profile height: 60 mm - Saw blade: 34 x 1.1 x 6350 mm - Blade motor: 7 kW | Control: Mitrol CNC, Pegaso software - Data interface: DSTV | Remote diagnostics via network - Hydraulic horizontal/vertical clamping, minimum-quantity lubrication (MQL) - Operating mode: standalone or as combined line with drill unit Machine weights and dimensions for both machines follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further Ficep machines on request. CONTACT / INQUIRY Price on request - individually or as a bundle | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: used, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 1,190 mm, total length: 6,500 mm, total width: 1,950 mm, total height: 450 mm, power: 0.75 kW (1.02 HP), Equipment: type plate available, Plastic modular belts/belt conveyors Condition: Used Year of manufacture: 2016/2017 Overall length: approx. 6500 mm Overall width incl. motor/feet: approx. 1950 mm Overall width without motor: approx. 1320 mm Conveyor width: approx. 1190 mm Conveyor height (height-adjustable): approx. 410 to 450 mm Material: Steel/Plastic Belt type: Plastic Color: Light gray/Dark gray Including SEW motor (0.75 KW) with Movimot (speed adjustable) Including feet (height-adjustable) Stock quantity: 3 units Price per unit Internal article number: 2026021103 The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of the conveyor system, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will gladly create a customized offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Csdjzfkm Aopfx Ad Iehc Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable way. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts Chjdpoz Ipl Tefx Ad Ijc - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!