Used Fooke Endura 8 - 30/25/11,5/5-28 for sale (91,537)

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Iedpfx Aozn N T Tod Nsba Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: ready for operation (used), Rexroth MSM019A-0300-NN-M0-CH0 servo motor MNR: R911325127 SN: 325127-G2840, used, good condition, 100% functional, scope of delivery as per photos Ibedewch Rvjpfx Ad Noa

Condition: ready for operation (used), Heidenhain TTR ERM 200 1024 A02 1R division drum Id. 390 925-02 SN:28933090, used, normal signs of wear, 100% functional, scope of delivery as per photos. Ibodpfjx Er T Tox Ad Nja

Condition: ready for operation (used), Heidenhain UM 121 ID: 325 003-02 Inverter - Power Supply Unit SN: 131285638C9 in exchange (Exchange service), professionally completely overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In such cases, an additional charge of €400 incl. VAT will apply. Ijdpfx Adex Etf Re Njba Attention: You are bidding on a Heidenhain UM 121 inverter (325 003-02, SN: 131285638C9) in exchange (Exchange service), professionally overhauled and tested with 3 months warranty, 100% functional, delivery scope as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400 incl. VAT will be issued.

Condition: ready for operation (used), Schneider Electric ELAU PacDrive MC-4/11/22/400 SN: 2228230252, used, in good condition, 100% functional, delivery as per photos. Ibsdpfx Adjx Eucds Nea

Condition: ready for operation (used), Heidenhain UVR 140D ID 728253-01 The stated cost covers only the repair analysis of your component, which you can send to us. After evaluation of your part, you will receive a quotation with the actual repair costs. Upon your approval for repair, the analysis fee will be waived. As part of the repair, your component will be completely overhauled and comes with a 3-month warranty from us. Iodpfoy Nrrwex Ad Noba

Condition: ready for operation (used), Bosch SD-B4.140.030 servomotor SN: 367003628 with built-in encoder ROD 426.029B-2500 / 281 464 08 - Z-No.: 1 909 713 SN: 4932072, used, in good condition, 100% functional, delivery as per photos. Ibedpfx Adsy Nn I Uo Nea

Condition: ready for operation (used), ALSTHOM LC320TE R0530 Brushless servo motor. Serial number: 11310 + Heidenhain ROD428B.011 2000 rotary encoder. Part number: 258 197 05, serial number: 3985310, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ibjdpei D Ewtsfx Ad Nea

Condition: ready for operation (used), Heidenhain UM 121 . 325 003-02 Serial number: 131285638C9 completely overhauled with 3 months warranty, professionally fully refurbished and tested with 3 months warranty, 100% functional, delivery contents as shown in the photos. Ijdox Etghepfx Ad Nsba

Condition: ready for operation (used), Siemens 1FT7064-5WK71-1MH1 synchronous motor SN:YFHN631252803001, professionally fully overhauled and tested with 12-month warranty, 100% functional, supplied as per the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Isdpfjx Du Aljx Ad Neba

Condition: used, Year of construction: 2003, functionality: fully functional, power: 30 kW (40.79 HP), Manufacturer: KAESER Ibjdpfowtz E Ujx Ad Noa Model: ASD 57 Motor: 30 kW Capacity: 4.5 m³/h Year of manufacture: 2003 Operating hours: 29,900 h

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH Ibjdpoyt H R Uefx Ad Nja • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Operating voltage: 400 V (3 ~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Ibjdpfxjyx Daxe Ad Noa Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Iedpfx Asywpahjd Njba Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,302 h, load capacity: 3,000 kg, lifting height: 6,000 mm, fuel type: gas, mast type: triplex, construction height: 2,850 mm, empty load weight: 4,960 kg, total height: 2,850 mm, total length: 2,830 mm, total width: 1,230 mm, Specification: Forklift type: Gas-powered Product code: 11252 Manufacturer: TOYOTA Model: 8FGF30 Ibodezbhczepfx Ad Nea Year: 2016 Lifting capacity, kg: 3000 Mast type: Triple Lifting height, mm: 6000 Transmission type: Automatic Operating hours: 4302 Country: France Weight (kg): 4960 Length x width x height, mm: 2830 x 1230 x 2850 Overall height, mm: 2850 Forklift attachments: Side shift, 4th hydraulic connection Note: The forklift has been inspected and is in good working order. A full technical service will be performed before delivery.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) Ibjdpfx Aoyxccrod Nea - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2025, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 60 mm, total height: 1,660 mm, total length: 80 mm, overall weight: 80 kg, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) Ibjdpfsunh Hrjx Ad Nea - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: new, Heidenhain EXE 650B-025-FACH 8MHz STANDARD 1144, . 263380-30, SN: 7491298, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Iedpfei Eaicex Ad Noba

Condition: ready for operation (used), Fibro EM 13.0280.8.122.08.0.03, Fibrotor rotary table, serial number: 1410410/1 + Rehfuss FG691 flat gearbox, serial number: 482511, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ibsdpfx Adoi D U Nvs Nea

Condition: excellent (used), mileage: 469,000 km, power: 340 kW (462.27 HP), first registration: 11/2014, fuel type: diesel, wheelbase: 7,500 mm, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, total length: 10,000 mm, total width: 2,530 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 10,000 kg, Year of construction: 2014, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, fog lights, navigation system, power mirror, trailer coupling, = Additional Options and Equipment = - 2-pedal control - Alarm system - Brake booster - Radio/CD player - Rain sensor - Beacon light - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Centralized lubrication = Remarks = 10x4 Euro 6 Hyva rear tipper 26 m³ Pressure device Inspection (HU) valid until 10-02-2027 469,000 km In very good condition! Ready for immediate use = Further Information = Ijdpfozr Hv Hjx Ad Nsba Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Axle configuration: 10x6 Maximum front axle load: 9,000 kg Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Lift axle; max. axle load: 10,000 kg Rear axle 3: Max. axle load: 11,500 kg Rear axle 4: Max. axle load: 11,500 kg Weights Unladen weight: 20,410 kg Payload: 31,590 kg Gross vehicle weight (GVW): 52,000 kg Functional Body brand: Hyva 28 m³ rear tipper with cover flaps Tipper: Rear Maintenance, History, and Condition APK (MOT inspection): valid until 02.2027 Technical condition: very good Visual condition: very good Identification Registration number: 84-BFJ-7

Condition: used, mileage: 1,102,435 km, power: 316 kW (429.64 HP), first registration: 10/2004, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,800 mm, fuel: diesel, color: black, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, total length: 7,300 mm, total width: 2,500 mm, Year of construction: 2004, Equipment: ABS, air conditioning, differential lock, electric window regulation, traction control, = Additional Options and Accessories = Other - Lift axle - Air suspension - PTO - Radio Isdpfx Adjzc D Ays Noba - Spotlights Other - Sun visor = Notes = DAF XF 430 6x2 with lift axle / 10 tires. 16-speed manual gearbox Euro 3 engine. Adjustable fifth wheel. Hiab 280-5 Radio remote control. 5 x hydraulic extension. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 295/80R22.5; Dual tires; Tire tread depth left (inner): 50%; Tire tread depth left (outer): 50%; Tire tread depth right (inner): 50%; Tire tread depth right (outer): 50%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left (inner): 40%; Tire tread depth left (outer): 40%; Tire tread depth right (inner): 40%; Tire tread depth right (outer): 40%; Suspension: Air suspension Weights Unladen weight: 14,560 kg Payload: 13,440 kg GVW: 28,000 kg Functional Crane: Hiab Identification Model number: XF 430 6x2 / HIAB 280-5 CRANE - = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status Ibjdpfx Adszntfmo Nea - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm Iedpfjznr Sxex Ad Nsba - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2011, operating hours: 5,900 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information ICE 28 RFS + Power Pack 525 RF Year of man. Vibrator 2011 Ibsdjh Tyydspfx Ad Noa Power pack 2004 Very good working condition More details on serious require

Condition: used, live center, live center, live morse taper, live center, live lathe center, live center, slip-on center, heavy duty live center -Manufacturer: Roterberg Drehmeister, revolving center point slip-on point -Type: 80 TGL 30-2325 -Recording: see photos -Center point: Ø 50 - 148 mm -Total dimensions: Ø 149 x 220 mm -Weight: 9.8kg Ibedehm Uaxspfx Ad Nea