Used Ferwood Customized Squaring Lines for sale (20,290)

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Dedpfjya H S Sox Aa Hocl Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Dcodpsrn Sqhsfx Aa Hol Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Year of construction: 1998, Overview Dodpeytvyfefx Aa Hecl This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB Dsdpfxszuyqvs Aa Hecl - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: used, Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Mechanical decoiler max. 1000kg Coil inner diameter 400/508mm Straightening machine with 9 straightening rollers and 2 feed rollers and film unwinder Dedpfsvk D Aljx Aa Hocl The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private customers!

Condition: not inspected (used), Year of construction: 2010, total length: 10,000 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 4,000 kg, working width: 700 mm, For Sale: Dcjdpfx Aajzv Sfzo Hjl Tromp Laminating Line Year of manufacture: 2010 This line was previously used for producing Ciabatta bread. Included: - Multi-roller unit - Cross-roller unit - Unrolling roller unit - Guillotine unit - Spreaders - Various side cutters - Spreading belts Working width: 700 mm It is possible to view the line on-site. If you have any questions or comments, please do not hesitate to contact us.

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand Dcedpozxn S Aofx Aa Hel 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L13998xW5404xH2350 mm; total weight: about 10600kg; power: 19kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the flow wrap packaging and lid closing unit on request. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dcjdev Nmawopfx Aa Hsl

Condition: excellent (used), Year of construction: 2024, OPERATING RANGE V807M Min. / max. height 10 – 460 mm Min. / max. width 50 – 1.140 mm Max. positioning weight 15.000 kg Max. operating width bottom side 1140 mm 1 Bevel angle + / - 50° Minimum automatic infeed length 1900mm Minimum automatic outfeed length Approx. 1400mm 2 1 Applicable to bottom side marking and square tube cutting. 2 1400mm automatic outfeed with at least one 1900mm part in the nesting. OPERATING SPEEDS Max. speed X-axis (measuring system) 60 m/min Max. air speed robot 11.6 m/sec Max. speed additional rotational axis 90 ͦ /sec ROBOT ACCURACY Repeatability ±0.04mm Absolute accuracy ±0.25mm MEASURING ROLL SYSTEM Max. speed 60 m/min Dcsdpfxozy Sqfs Aa Hsl Diameter measuring rolls 170 mm PLASMA CUTTING UNIT XPR300 CORE Min. thickness 3 mm Max. thickness 80 mm Max. pierce capacity 45 mm Dross-free cutting max. 38 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,5% pure clean, dry, oil-free) Marking Nitrogen gas Shield gas mild steel O2 and Air (ISO 8573-1:2010 Class 1.4.2) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.036 mm / min 130A 12 mm Approx. 3.061 mm / min 170A 25 mm Approx. 1.950 mm / min 300A 30 mm Approx. 1.530 mm / min 300A 40 mm Approx. 940 mm / min 300A 50 mm Approx. 560 mm / min 300A 80 mm Approx. 165 mm / min 300A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes.

Condition: used, Fully automatic scarf jointing line for the following dimensions: thickness: approx. 24 – 100 mm, width: approx. 80 – 240 mm, scarf joint lengths: 400 – 1,500 mm, finished length: 2.50 m – 13.50 m, infinitely adjustable. Consisting of the following plant components: - SMB vacuum stacking system, longitudinal, with 2 lifting tables and 2 package conveyor lines, year of manufacture 2013, package dimensions max. 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system, singulation and infeed into a conveyor line for scanner feeding, board turner, diverter for too moist, too dry, diverter for B-quality, marking station or automatic operation - Bidac end-face scanner for scarf joint detection, year of manufacture 2013 - Brookhuis moisture measurement FMI 5, year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras, and new optimization software - Dimter Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009, and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT scarf jointing system with rotary table, special pack AH 1050, year of manufacture 2005, consisting of: milling machine, tipping station, infeed section, length 5.0 m, cycle press, length 6.00 m, crosscut saw - SMB stacking machine, year of manufacture 1998, length 2.50 – 13.50 m, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually adjustable stop, infinitely adjustable, electro/hydraulically controlled, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package ejector. Location: Customer Dcodpsvvi Tyofx Aa Hol

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Dcsdpfx Aszuynhoa Hel Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2020, operating hours: 10,000 h, condition: excellent (used), functionality: unexamined, FFP1,FFP2,FFP3,Carbon Layer Available Cup type, C type, Duckbill type, Flat-Fold type. FFP2 masks are suitable for filtering out at least 94% of airborne particles, including dust, smoke, aerosols, and droplets. They protect against hazardous materials up to 10 times the workplace exposure limit. Dcjdeza E Raopfx Aa Hsl They are widely used across several settings: Healthcare: Protecting wearers against airborne viruses, bacteria, and pathogens (such as influenza and COVID-19). Construction & DIY: Safeguarding lungs from hazardous dusts generated by drilling, masonry work, plastering, sanding, and handling loft insulation. Industry: Filtering oil and water-based mists, as well as dusts found in woodworking, agriculture, and waste management. An FFP3 mask (Filtering Facepiece 3) is a high-grade respirator used to protect against hazardous airborne substances. It filters at least 99% of airborne particles and is essential in environments with high concentrations of toxic dusts, aerosols, and pathogens.

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation Dcedpfx Aszytmzoa Hjl - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Dcodpfx Ajwnh Eqea Hol Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0700922, input voltage: 400 V, type of input current: three-phase, KÖNIG ECO TWIN 800 WITH CLASSIC REX T6/5S SK58 – 2018 Complete König line for the automatic production of rolls and bakery products. Year: 2018 The line consists of a König Classic Rex T6/5S dividing-rounding machine combined with an Eco Twin 800 pre-fermentation and shaping line. Features: * Manufacturer: KönIG Dsdpszyv Nrofx Aa Hocl * Model: Eco Twin 800 * Year: 2018 * Dividing head: Classic Rex T6/5S * Piston size: SK58 * Weight range: 35 to 85 g * Operation in 5 or 6 rows * Nominal width: 800 mm * Eco Twin capacity: * Up to 5,040 pieces/hour in 6 rows * Up to 4,200 pieces/hour in 5 rows * Maximum capacity of the Classic Rex head: * Up to 9,000 pieces/hour in 6 rows * Up to 7,500 pieces/hour in 5 rows * Integrated pre-fermentation * Siemens Simatic control * Integrated elongation roller * Automatic product depositing onto baking sheets * Several interchangeable stamping tools available * Quick tool changes * Cutting/stamping station depending on configuration Products that can be produced: The line allows for the production of a wide variety of rolls, including: * Round rolls * Stamped rolls * Kaiser rolls * Cut rolls * Elongated rolls * Elongated and cut rolls * Elongated and stamped/pressed rolls * Double rolls * Various special shapes depending on the stamping tool used Several stamping tools are available with the line. The Eco Twin is a compact and versatile line that allows for the production of a wide variety of products with quick changeover times. Machine can be viewed and tested by appointment. Photos, videos, and additional technical information available upon request. Photos taken before cleaning.

Condition: used, Year of construction: 2009, 2009 HGG Profiling Equipment PLC 600 Plasma CNC Profile Cutting Line with Procam Software Dedjzy Itvspfx Aa Hocl Cutting Capacity Pipe Range Ø48-Ø610mm. Maximum Cutting Angle 45°. Maximum Pipe Weight 3 Ton. Note: Hard Drive Has been Removed For Sale, Replacements Are Readily Available From HGG. With Fume Extraction Unit, Safety Light Curtain Guards & Signal Tower. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site.

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. Djdpsyq Tb Isfx Aa Hjcl After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6415 1 x Comcount Packaging Systems bowl feeder and 1 x GIC Gainsborough VFFS bagger with 1 x outfeed conveyor. Model of Comcount bowl feeder - BFWT. Manufacturer - Comcount Ltd. Date of manufacture – 2019. Weighing range - 150g-500g. GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd Date of manufacture – 2008. Sealing bars - 290mm horizontal & 320mm vertical. Reel width - 620mm. Dcodpfey Hlw Iex Aa Hel Current film - 280mm. Forming tube - 80mm diameter. Outfeed conveyor - IC350. Belt width - 295mm. Outfeed height - 910mm high. Overall footprint - 4.3m long x 3.45m wide x 3.1m high. Condition – Very good. Only been used 5-6 times in 2.5 years.

Condition: excellent (used), CATALOGUE NUMBER: 7816 TECHNICAL DATA DDCA - Surfacing cutter length: 180 – 845mm - Surfacing cutter width: 30 – 75mm - Surfacing cutter thickness: 10 – 45mm - Spindle diameter: 30mm - Max. disc diameter: 250mm - 5 spindles: - Left side: 1) Vertical upper: 2.2kW 2) Horizontal lower: 2.2kW Right side: 1) Vertical lower: 2.2kW 2) Vertical upper: 2.2kW 3) Horizontal lower: 2.2kW - Spindles adjustable up/down, left/right - Material pressure: 2 pcs - Smooth feed rate adjustment: 0-10m/min - Spindle diameter: 5x100mm - Dimensions (L/W/H): 1870/2230/1320mm DDGA - Width of workpiece: 35 – 130mm - Thickness of workpiece: 10 – 40mm - Minimum length of workpiece: 200mm - Spindle arrangement: 1) Lower: 5.5kW 2) Right: 5.5kW 3) Left: 5.5kW 4) Upper: 5.5kW - Spindles adjustable up/down - 6-blade heads fitted on upper and lower spindles - Spindle diameter: 40mm - Milling cutters fitted on right and left spindles, max. diameter: 50mm - Spindle diameter: 30mm - 2 feed rates: 4.9kW - Central chain lubrication via oil pump - Spindle diameter: 4x125mm Dcjdezx Rkzspfx Aa Hjl - Dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish made - 5 spindles - Unpainted - Very good condition - Used production line Net price: 52900 PLN Net price: 12600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2009, Colour: White - Details: - └ Description: Exclusive Makor - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MKR30029343 - Rail present: No Dedpfewnh I Eox Aa Hscl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2025, condition: used, functionality: unexamined, Complete Automatic Roll Forming Line (fully compatible with all Unistrut products) Year of manufacture: 2025 Model: CIRF-2019-2486 Unistrut 41 x 41 and 41 x 21 profile Approximately 15 meters per minute UK / Irish wiring standard (UK wiring schematics, safety pull cord system around main beds) with 2-ton de-coiler 3-stage, 3-ram punching unit (Hole Size: Approx 12mm × 25mm / Hole Spacing: Approx 50mm centers) Fully automatic upstroke shear Auto Hydraulic Logo printer/stamper Discharge table Overall Length: Approximately 30 meters Dsdpszc Hkgsfx Aa Hocl

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, HGG RPC 1200 CNC Robot Coping Line- Year 2017. 18 metres in feed and outfeed rollers. Staubli 6 axis robot. Dodpszrp T Iofx Aa Hecl Kjellberg Fine Focus Plasma Unit. Dust extraction. 1200mm Capacity.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025/002, Finger jointing machines and lines are a masterpiece of woodworking industry >wood entry lengths 900 to 6100 mm< >wood rests and tools drive< >Best tooth milling quality and optimized cutting speed< >Long service life of the milling tools / dovetail cutters< -MINDA - MACH I (patented) -High performance finger jointing line Dcjdpfx Aaocbyp Ne Hol -for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min -vertical and horizontal joints possible max. 200 x 300 mm -extremely flexible; short set-up times; reliable operation The only package system in the world that can also process a single board or single beam. -finger jointing machine, for vertical and horizontal milling, zinc profiles, made in Germany, along with new developments in the clamping stations and the transfer channel on the router table, has the Joema MACH I include a groundbreaking benefits, fast pace. Together with 1200 mm milling channel at 40 mm Thickness technical power meter = approx 150 meters /min, very reliable material transport - No vulnerable conveyor rollers, flaps and cross conveyors - high availability - for all sections including square suitable - by fully automatic, continuous channel matching is possible in extreme cases single mill - thus the system is extremely flexible, vertically horizontally and zinc profiles possible performance with KVH 160 x 280 mm are 38 meters / min, with KVH 100 x 300 mm, 64 meters / min, at BSH 45 x 250 mm are 110 meters / min, >>cutting-edge technology simply kept

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector Dcodex Ari Hjpfx Aa Hol 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: ready for operation (used), Manufacturer: Handtmann / Stiller Model: VF830 Year: 2020 Condition: Used Serial number: 44613 Stock number: 3427P Filling pressure: up to 25 Bar Pump capacity: max 6000 kg/h Power: 3 x 400V, 50Hz, 6kW Dimensions: 2300 x 1500 x 2150 mm Weight: 1550 kg Infeed rotary table for empty cans Diameter: 1200 mm Dodpfezxrx Hex Aa Hscl Handtmann / Verbufa filling machine for cans Type: 52088-A-0084 Serial number: 261960 Year of manufacture: 2020 Can diameter: 73 & 99 mm Power: 3 x 400V, 50Hz, 1.6kW Weight: 400 kg Double-head filling machine with Handtmann FST547 waterwheel With filling station and conveyor belt of 3200 x 2000 x 2200 mm Stiller can seaming machine Type: STA2000 Serial number: 20012 Year of manufacture: 2020 Capacity: up to 2000 cans/h Can diameter: 73 & 99 mm Can height: 30 - 300 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 3.6kW Dimensions: 2600 x 1100 x 2000 mm Weight: 570 kg Including conveyor belts and a rotary table with a diameter of 1200 mm.