Used Cronosstech 60/20 Ton Column-Type Hydraulic Deep Drawing Press for sale (85,044)

Condition: used, Year of construction: 1987, pressure 125 t Iodpst Hwuisfx Ad Neba distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1977, pressure 160 t Ibsdst Hw E Ijpfx Ad Nsa throat 360 mm stroke 560 mm total power requirement 33 kW weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz - Hydraulic draw cushion under the table with holes through the table top - 2-hand operation - Electrical control cabinet damaged Iodpfjdzp Trex Ad Nsba Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Ijdpsfxygpjfx Ad Nsba Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Iodpofxyh Rofx Ad Neba Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: used, total length: 5,200 mm, total width: 2,700 mm, total height: 6,800 mm, overall weight: 110,000 kg, Renovated by Beck & Röhm in 1992,pressing force: 630 t,bolster area: 1730 × 2500 mm,number of T-slots: 8,ram stroke: 900 mm,installation height: 1550 mm,power requirement: 2 × 7.5 kW.Dismantling and loading costs are optional. If dismantling is carried out by the buyer, the corresponding costs will of course be reimbursed. Weight approx.: 110,000 kg Ibedpfezdfztox Ad Nja Dimensions (LxWxH) approx.: 5200 x 2700 x 6800 mm Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec Ibedpfxofxyh Aj Ad Noa :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ibsdeguvtlopfx Ad Nsa Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread Ibedetrpiiepfx Ad Nsa - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm table height 850 mm weight of the machine ca. 2,5 t Ibedpfx Adeq Rhkwo Nsa

Condition: used, Year of construction: 2024, pressure 70 t throat 325 mm stroke 800 mm die cushion capacity 35 t drawing stroke 280 mm ejector stroke 240 mm rapid traverse - down 650 mm/sec working feed 58-199 mm/sec dayligth 1050 mm table surface area 900x580 mm ram surface 460x460 mm total power requirement 45 kW weight of the machine ca. 6,3 t dimensions of the machine ca. BxTxH 1000x2200x4000 mm Ibsdpfsvn U Sxjx Ad Nea

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t Iodjlp U Hgepfx Ad Neba

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 160 mm, operating speed: 10 mm/s, reverse speed: 90 mm/s, throat depth: 320 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 160 mm Ibedjzcmbfepfx Ad Nsa Daylight (Distance between upper and lower dies): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Machine Features Double-cylinder upper beam bending system Steel frame and upper beam construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balance shaft and eccentric bearing system for maintaining parallelism Motor-controlled angle adjustment with a mechanical stroke system within the cylinders Wide working clearance suitable for using different dies Tonnage adjustment and bottom dead center stop via NC control unit Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant multi-functional foot pedal and emergency stop system Compact hydraulic power unit with HAWE or Rexroth components Remote service support with Siemens, Pizzato, and Balluff electrical equipment LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines of memory per program Easy program loading and downloading via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (600 mm) Linear guide and programmable back gauge system 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear guides Lower die centering and fixing bolts Programmable precision back gauge retraction function Optional Equipment Motorized R-axis Custom bending dies Dual-hand and foot-controlled special pedal system DSP or FIESSLER safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/s Idle Descent Speed: 90 mm/s Throat Depth: 320 mm Daylight: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Y-Axis Motor: 0.37 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), pressing force: 60 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 410 mm, ram plate length: 1,250 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake The HPB A60-1250 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precision sheet metal bending applications, offering a bending force of 60 tons and a bending length of 1250 mm. Thanks to the ESA S630 CNC control unit, servo-motor driven back gauge system, compact frame structure, and professional tooling equipment, it provides high precision and efficiency for workshops, metal processing companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight (Bottom – Top Die Gap): 415 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 130 mm/sn Accuracy: ±0.10 mm Manual R-axis movement: 190 mm Steel frame construction Hardened ball screw spindle Hardened linear slide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Manual Promecam Upper Die Holder E7 Quick tool change Safe operation Structure to prevent die fall CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slot can be applied upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible A Series Open Cabinet Design CRONOSSTECH Premium open cabinet Wide field of view Ergonomic design Professional appearance Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel according to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Energy-saving Standby function Front Support Arms Iodpfx Adozbyu Ne Neba 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features AKAS II Front Safety Laser System + PLC + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Technical Specifications Bending Force: 60 Ton Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight (Bottom – Top Die Gap): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/sn Return Speed: 120 mm/sn Bending Speed: 10 mm/sn Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Back Gauge X-Axis Speed: 300 mm/sn Back Gauge R-Axis Speed: 250 mm/sn This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 60 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise sheet metal bending applications, offering a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Daylight (Distance between lower and upper die): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSSTECH Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Ibjdjzbrfaepfx Ad Nsa Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel conforming to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features Servo Motorized X + R Axis Back Gauge System Servo motorized X and R-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Delem DA53Tx CNC Control Unit (15” Touchscreen) 15” color touchscreen 2D product drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and fault management Technical Specifications Bending Force: 60 Ton Bending Length: 2100 mm Distance between Columns: 1600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide uniform load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 robust slide guides - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine body designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen hydraulic unit oil temperature and system status monitoring - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guided H-type press frame - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 500 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK under EN ISO 15614-1/2017, welding applications supervised by certified welding coordination engineers in accordance with EN ISO 14731 - Max. Operating Pressure: 250 bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER Ibodpfxox N T H Ao Ad Nja - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Front Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered with heavy-duty industrial conditions in mind. The frame and main carrier constructions are stress-relieved by vibration. Thanks to bronze Zr14 slide bushings, even load distribution and high precision are achieved throughout ram movement. ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Vibrationally stress-relieved frame structure - Bronze Zr14 slide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards Isdpfsx N T Rbsx Ad Njba - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1000 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Movable Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Vibration stress relief - Welding: TÜRK-AK accredited WPQR and WPS certified EN ISO 15614-1/2017 welding applications - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6000 mm - Approximate Press Width: 3450 mm - Approximate Press Depth: 2400 mm - Height of Lower Table from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,200 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, flow forming, shaping, and heavy-duty pressing operations. Thanks to its eight-slide H-frame construction, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved via vibration, ensuring that loads generated during pressing are distributed evenly to maintain parallelism and squareness tolerances. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibration-relieved stress body structure - Bronze Zr14 slide bearings - WPQR and WPS welding applications certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-slide H-frame press design Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Isdox N T Ruopfx Ad Neba Capacity (Ram): 1200 tons Movable Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibro-stress-relieved Welding Application: WPQR and WPS applications certified by TÜRK-AK in accordance with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cc – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6100 mm Approx. Press Width: 3550 mm Approx. Press Depth: 2400 mm Lower Table Height From Ground: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 2,500 t, stroke length: 1,000 mm, table width: 1,800 mm, table length: 2,600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and spinning applications that require extremely high tonnage. With its 8-guided H-frame construction, the press provides maximum rigidity during operation; parallelism and perpendicularity tolerances are reliably maintained throughout the full stroke length. The CHP 2500 model, featuring large bolster dimensions, a multi-cylinder main pressing structure, and a high-capacity hydraulic system, is specifically designed for the automotive, heavy industry, defense, and high-tonnage tooling sectors. The frame structure is stress-relieved by vibration to ensure durability and reliable long-term operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame via vibration method - Bronze Zr14 slide bearings - Welding applications certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in accordance with CE standards - PLC-controlled hydraulic system - 7” touchscreen panel (DELTA) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 tons Moving Bolster Size: 1800 × 2600 mm Fixed Bolster Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Weld Stress Relief: Vibration method Welding Certification: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017) Max. Operating Pressure: 250 bar Iedjx N T S Espfx Ad Noba Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Bolster Fast Descent Speed: 150 mm/s Moving Bolster Drawing Speed: 12 mm/s Moving Bolster Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,500 mm Approx. Press Width: 3,950 mm Approx. Press Depth: 2,600 mm Lower Table Height from Floor: 1,500 mm Primary Filling Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 120 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 500 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame design, they provide high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and carrier components are stress-relieved by vibration. The bronze Zr14 material used in slide bearings ensures long service life and stable operation. Highlighted Advantages - 8-guideway H-frame design - Vibration stress-relieved steel construction - Welding applications in accordance with ISO standards - PLC control with touchscreen interface - Operator safety and process stability oriented design ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK accredited WPQR & WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen Ibsdpfxsx N Tx Ss Ad Nea - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Tonnes Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/mtr Perpendicularity Tolerance: 60 micron/mtr Ram Stroke: 500 mm Min. Clearance: 100 mm Max. Clearance: 600 mm Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified welding process accredited by TÜRK-AK (certified welding supervised by engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Height of Press: 3400 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tonnes Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 600 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions developed for sheet metal forming, straightening, assembly, and die stamping applications, offering high rigidity. Thanks to its 8-guided H-frame structure, loads occurring during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is specifically designed for medium to high-tonnage applications, providing reliable performance and long service life. CHP Series – Structural Features The CHP series presses are engineered considering heavy-duty operational conditions. The main frame and supporting parts are stress-relieved by vibration. Bronze Zr14 guide bushings ensure smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guides - Stress-relieved main frame and carrier parts by vibration - Bronze Zr14 guide bushings - WPQR & WPS welding applications approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination indicator - Monitoring of hydraulic unit oil temperature and system status via the screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER control components 📐 Technical Specifications – CHP 200 Type: Steel construction, H-frame press with 8 guides Frame Material: St52 – ERDEMİR Guide Bushing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Rapid Down Speed (Movable Table): 150 mm/sec Bumping Speed (Movable Table): 12 mm/sec Return Speed (Movable Table): 170 mm/sec Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 3800 mm Approximate Press Width: 2950 mm Iedpfx Adjx N T D Ue Noba Approximate Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 150 t, stroke length: 500 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines designed for sheet metal forming, straightening, assembly, and die pressing applications. Featuring a rigid steel frame and an 8-slide H-body structure, they ensure stable, balanced, and repeatable operation during pressing tasks. The CHP 150 model is specifically developed to deliver reliable performance and long service life for medium-capacity applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty industrial use. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 slide bearings provide precise load transfer and extended operational stability. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guide slides - Stress-relieved frame and support components by vibration - Bronze Zr14 slide bearings - WPQR & WPS approved welding applications with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic unit oil temperature and system status on the screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 150 Type: Steel construction, H-frame with 8 guide slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Isdex N T Dzopfx Ad Neba Parallelism Tolerance: 120 micron/m. Perpendicularity Tolerance: 60 micron/m. Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TURK-AK; EN ISO 15614-1:2017 welding certificate (audited by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Forming Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Approx. Height: 3650 mm Approx. Width: 2950 mm Approx. Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 400 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 400 H-Frame Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die press applications. Thanks to the 8-guide H-frame construction, high loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 400 model is designed to deliver long-lasting and reliable performance for heavy-duty applications that require high tonnage. CHP Series – Structural Features Iedpfx Aex N T Hped Neba The CHP series presses are engineered with heavy-duty conditions in mind. The frame and supporting components are stress-relieved through vibration. Bronze Zr14 slide bearings contribute to long-term precision by ensuring uniform load distribution during ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier components by vibration - Bronze Zr14 slide bearings - TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 400 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 microns/meter Squareness Tolerance: 60 microns/meter Ram Stroke: 800 mm Min. Clearance: 100 mm Max. Clearance: 900 mm Stress Relief: Vibratory stress relief Welding Application: TÜRK-AK accredited WPQR & WPS certified EN ISO 15614-1/2017 welding application certificate (supervised by certified welding coordination engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec. Movable Table Forming Speed: 12 mm/sec. Movable Table Return Speed: 170 mm/sec. Main Cylinder Internal Diameter: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 5600 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK PLC: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 800 t, stroke length: 800 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guided slide H-frame construction ensures balanced distribution of high forces generated during pressing, providing maximum rigidity and long service life. The CHP 800 model has been developed targeting reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered considering heavy industrial conditions. The frame and main supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings ensure even load distribution and precise movement throughout the ram stroke. Iodsx N T Nkepfx Ad Njba ⚙️ Standard Equipment • Steel construction with 8-guided slides in H-type press frame • Stress-relieved frame structure by vibration • Bronze Zr14 slide bearings • Welded joints approved with WPQR & WPS certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • DELTA 7” touchscreen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning system • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Dual-hand control system • Light curtain (standard for operator safety) • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 800 • Type: Steel construction, 8-guided slide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bearing: Bronze Zr14 • Capacity (Ram): 800 tons • Movable Table Size: 1500 × 2000 mm • Fixed Table Size: 1500 × 2000 mm • Parallelism Tolerance: 120 micron/meter • Perpendicularity Tolerance: 60 micron/meter • Stroke (Ram): 800 mm • Min. Clearance: 100 mm • Max. Clearance: 900 mm • Welded Structure Stress Relief: Vibration stress relieving • Welding Process: WPQR and WPS certified by TÜRK-AK (according to EN ISO 15614-1:2017; inspected by certified welding coordination engineers per EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 75 kW – IE3 • Main Pump: 70 cm³ – REXROTH or PARKER • Movable Table Fast Approach Speed: 150 mm/sec • Movable Table Drawing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 units) • Auxiliary Acceleration Cylinders: 2 units • Approx. Press Height: 6000 mm • Approx. Press Width: 3350 mm • Approx. Press Depth: 2700 mm • Lower Table Height from Floor: 1450 mm • Pre-fill Valve: NG 200 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Position Scale: NOVATECHNIK or TURCK • PLC Application: DELTA • Touchscreen Panel: DELTA 7” • Electrical Components: SIEMENS – SCHNEIDER • Approximate Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 2,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guided Slide General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications requiring very high tonnage. The rigid H-frame structure with 8 guiding slides ensures maximum rigidity during pressing operations and maintains parallelism and perpendicularity tolerances throughout the full stroke. The CHP 2000 model, featuring large table dimensions, a high-capacity hydraulic system, and a powerful motor, offers a reliable and durable solution for the automotive, defense, heavy industry sectors, and high-tonnage production lines. The frame is stress-relieved via vibration to ensure stable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guided slides - Vibration stress-relieved body structure - Bronze Zr14 slide bearings - TÜRK-AK accredited WPQR and WPS certified welding procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 2000 Iodpfox N T Srsx Ad Nsba - Type: Steel construction, H-frame body with 8 guided slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Moving Table Size: 1500 × 2500 mm - Fixed Table Size: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress-Relief: Vibration stress-relieved - Welding Application: WPQR and WPS certified by TÜRK-AK, according to EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Height of Press: 6300 mm - Approx. Width of Press: 3850 mm - Approx. Depth of Press: 2500 mm - Lower Table Height from Floor: 1500 mm - Main Fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.