Milling machine

Maho MH500 W2

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), Lajdpszh Nczjfx Akljg 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Lasdpsu Tuk Hofx Akleg Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,500 h, load capacity: 7,000 kg, lifting height: 24,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 130 kW (176.75 HP), fork length: 1,200 mm, empty load weight: 21,810 kg, total length: 7,820 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telescopic Handler Load center: 600 Mast type: Telescopic Transmission: Hydrostatic Technical condition: good Front tire type: Pneumatic Front tire size: 445 / 65 R22.5 Front tire condition: 80 - 100% Rear tire type: Pneumatic Lasdjzfbvuspfx Aklsg Rear tire size: 445 / 65 R22.5 Rear tire condition: 80 - 100% Description: The MRT 2470 Privilege Plus is an all-terrain rotating telehandler, ideally suited for applications in construction and industry. This machine is a significant asset for your material handling needs. It combines three machines in one: telehandler, crane, and work platform. Its 360° rotation capability allows you to perform various tasks without having to reposition the machine. The boom features a pentagonal cross-section, providing very high precision during operation and maintaining lateral rigidity regardless of wear. This offers added safety for you and your team. Soon, you won’t want to be without this powerful, precise, and versatile machine. 3rd hydraulic valve, air conditioning, Remote control available on request with bucket or light material bucket (1000 or 1500 liters), large swivel man basket.

Condition: refurbished (used), Year of construction: 2019, operating hours: 332 h, functionality: fully functional, working width: 1,450 mm, battery voltage: 24 V, area performance: 8,700 m²/h, The Kärcher KM 105/110 R Bp Pack is from the year 2018 and has only 332 operating hours. It has been completely overhauled by us, with each component being checked for functionality and cleaned. Four new, maintenance-free gel batteries are installed, which can be conveniently charged using the integrated charger. The machine has two new side brushes, a new sickle-type side brush, and a new main sweeping roller. Two new flat-fold filters are mounted, which are automatically cleaned during sweeping. For easy emptying of the coarse dirt container, the machine has a hydraulic high-dump function, which can be operated entirely from the driver's seat. An automatic adjustment of the main sweeping roller when it wears down simplifies maintenance work. The wheels are non-marking and are therefore also suitable for indoor use. Technical data: Working width with two side brushes: 1450 mm Area performance: 8700 m²/h Lasdpfoy T Hzbox Akleg Volume of sweeping container: 110 liters Weight: 610 kg

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 Ljdpeuhpiyjfx Akljag - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Condition: used, Model: H-600 Serial no: 11-122-116 Laedpeyzzldofx Aklog Operating hours: 17,395 Voltage: 380 V, 50 Hz RPM: 1,425 Power: 1 HP Current: 4.0 A Phases: 3

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Laedpex S Rcmofx Akleg

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg Laedpfotv Riajx Akleg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Laodpfsxtmqtsx Aklog Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC Lajdepkyn Rspfx Akleg