Filterplatte Edelstahl 600x600 V2A HSK

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, controller model: SINUMERIK 840D SL, laser power: 3,200 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, The machine was exclusively serviced by Trumpf until 2023 as part of a maintenance contract. TECHNICAL DETAILS Dkedpfx Ajzyakgsa Hjt Working length: 3,000 mm Working width: 1,500 mm Working height: 115 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 115 mm Maximum workpiece weight: 900 kg Sheet thickness steel max.: 20 mm Sheet thickness stainless steel max.: 12 mm Sheet thickness aluminum max.: 8 mm Sheet thickness max.: 20 mm Feed rate X-axis: 100 m/min Feed rate Y-axis: 200 m/min Feed rate Z-axis: 80 m/min Cutting speed: 140 mm/min Positioning speed X/Y-axis: 140 m/min Repeat accuracy: 0.05 mm Smallest programmable step: 0.001 mm MACHINE DETAILS Laser type: CO₂ laser Laser source manufacturer: Trumpf Laser source model: TruFlow 3200 Laser power: 3,200 W Laser wavelength: 10,600 nm Cooling type: Water Control type: CNC control Control manufacturer: Siemens Control model: SINUMERIK 840D SL Automation level: Semi-automatic Operating type: Electric Input voltage: 400 V Input current: 100 A Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,500 x 7,600 x 2,200 mm Total weight: 12,000 kg Laser hours NC control: 35,623 h Laser hours resonator / pump 1: 34,258 h Laser hours beam on / pump 2: 10,155 h EQUIPMENT CE marking Central lubrication system Cooling unit Documentation / manual Dust extraction Emergency stop switch Safety light curtain

Condition: used, Year of construction: 2001, lifting height: 11,500 mm, TECHNICAL DETAILS Platform height: max. 11.50 m Number of people: max. 2 Weight of people: 215 kg Weight of materials: 55 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. Dedpjzwpd Rjfx Aa Hjkt If the item is not collected on time, a storage fee of €20.00 per lot and for each day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the item on-site before the end of the auction.

Condition: used, machine/vehicle number: 425130268, Year of construction: 2016, operating hours: 813 h, load capacity: 1,000 kg, fork length: 1,150 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Auction of two Jungheinrich EPL 110 (manufactured in 2016 & 2015) The 2015 unit is defective and will be sold as a source of spare parts! TECHNICAL DETAILS Lifting capacity: 1,000 kg Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 85 Ah Dimensions & Weight Dimensions (L x W x H): 1,600 x 800 x 1,940 mm Self-weight: 500 kg Serial number, unit 1: 425130268 Operating hours, unit 1: 813 h UVV certificate, unit 1: 04/2026 EQUIPMENT Integrated battery charger The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. Dodpfx Ajzwpctsa Hokt No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: used, Year of construction: 2022, total length: 400 mm, total height: 450 mm, total width: 400 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dksdozwn Tkopfx Aa Hjt Dimensions & Weight Dimensions (L x W x H): 400 x 400 x 450 mm Weight: approx. 20 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, machine/vehicle number: FPR4012012202007256, Year of construction: 2022, total length: 800 mm, total height: 450 mm, total width: 600 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Onyx filament: 800 cm3 Fiberglass filament: 50 cm3 MACHINE DETAILS Dedpszwn Tdsfx Aa Hokt Dimensions & Weight Transport dimensions: approx. 800 × 600 × 450 mm Transport weight: approx. 30 kg EQUIPMENT Markforged EIGER Software Cloud Online Version Markforged EIGER Software Desktop Online Version Early access to new features 3 × FFF quick-change nozzle 3 × CFF quick-change nozzle Markforged Drybox for material storage The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: used, Year of construction: 2022, machine/vehicle number: 102003026, overall weight: 341 kg, load capacity: 600 kg, protection type (IP code): IP52, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 600 kg Max. speed: 2 m/s Protection rating: IP52 MACHINE DETAILS Dkjdpfozwn S Tex Aa Hjt Dimensions & Weight Transport dimensions (L × W × H): approx. 1,380 × 1,000 × 1,180 mm Weight: approx. 341 kg The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Dkodpfxjzv Rc Sj Aa Hjt Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Dkjdszv Rhuepfx Aa Hst Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Dsdpszv Rcrefx Aa Hskt Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Dkjdezvnfwspfx Aa Hjt Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot