Conveyor

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Gbodpfx Ajzf Ircjmzjp Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: good (used), Automatic perforator Kugler 340-2R Device in very good condition. Includes perforation tool 3:1 round hole and additional tools. Manufacturer description: Perforation device with a working width of up to 340 mm Device adapted for continuous operation and high loads Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shelf feeder enabling continuous operation After perforation, sheets rotate around a special drum, thanks to which the correct sequence of pages is maintained at the receiving station Possibility of using two-part strips enabling perforation of both books and calendars Perforation up to 3 mm in one cycle Quick and easy replacement of perforation strips Possibility of using strips with / without a recess for the hanger. There is a shaker on the delivery. Maximum working width. 340 mm Format / Dimensions min. 120x105mm Format / Dimensions max. 340x340mm Maximum cutting thickness. 3mm Gedpjwt Stvjfx Amzjbp Mechanical cycles per minute 80-100 cycles Power supply 380V Weight 1580kg

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel dividing/milling units: 1 Number of edge processing units: 4 Adhesive system: EVA hot melt adhesive The machine consists of the following processing units: Panel dividing/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Capping Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Overpressure Pressure with idler rollers Panel support guides Edge roller magazine Adhesive pot for EVA hot melt adhesive Gbedpfjzf Id Sjx Amzep Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Number of upper units: 4 With positioning via NC: yes Lateral horizontal groups: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 Gbedpfx Aszf Ibwjmzep With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8649

Condition: good (used), Year of construction: 2006, functionality: fully functional, StitchLiner5500 - saddle-stitching system which flat sheet collating, scoring, folding, stitching and three-knife trimming in line. Line with: Gedpfxsvzgy Uo Amzobp 2 Collator tower VAC 100 – (total 20 bins). Stacker/By-pass Unit: ST-40 Conveyor ST-CV Accumulator/Folder : ACF-30 Saddle-stitcher: SPF-30 Three-knife Trimmer: HTS-30 Options: 4 Stitching Head Center-Cut Device Additional Loop Stitching Kit Available Immediately - Can be inspect in production

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Gbedpfxozf Ibde Amzop Drilling units, Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units, Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles, Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles, Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Grooving units Number of grooving units: 2 Grooving units, Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Grooving units, Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode scanner (manufacturer: SICK) CE marking Protective grating Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Max. cutting height: 430 mm Gbedpfxjzf H Szj Amzjp EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at its destination. External Reference: 8580

Condition: ready for operation (used), Year of construction: 2008, Herzog + Heymann mobile flat pile feeder F530, year of manufacture 2008 Herzog + Heymann M7.32, year of manufacture 2008 – suitable for miniature folds – 12 folding pockets – roller diameter 32mm – minimum fold length 25mm Gjdpfxex Hbkdj Amzjbp – maximum working width 52cm – double rear knife shafts – transfer section Herzog + Heymann knife folding unit XS 300/6, year of manufacture 2008 – for small formats Herzog + Heymann upright sheet delivery 271, year of manufacture 2008 Stahl miniature upright sheet delivery STA30F, year of manufacture 1990 Herzog + Heymann transfer section 246/08, year of manufacture 2008 Optional: Herzog + Heymann small format feeder, year of manufacture 1991 – bottom suction feed

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! Gsdszf H R Ropfx Amzjbp TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling units: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW Godpfxjzf H Nye Amzsbp EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8578

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Performance features - Minimal maintenance required - Highly efficient - User-friendly operation - Fastest changeover between formats Technical data - Working width: 500 mm - Maximum punched page format: 500 mm - Maximum unpunched page format: 500 mm Godsxduclepfx Amzjbp - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels - Adjustable edge distance - Punching unit can be selectively deactivated - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Cutting depth main saw: 123 mm Number of grippers: 7 Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding fence Gbodpfx Aszf H Nmjmzop The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW EQUIPMENT Tilting spindle Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577 Gbsdpfx Aszf H Iismzep

Condition: used, machine/vehicle number: 980117384, Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Gbsdpfoh Axqfox Amzjp Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Saw unit 1 (tiltable) Motor power: 6 kW Saw unit 2 (tiltable) Motor power: 0.75 kW Working width max.: 3,000 mm Saw blade diameter: 300 mm MACHINE DETAILS Gbsdpszf H Hrofx Amzep Connection power: 7 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before pick-up and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8572