Stainless steel centrifugal sieve, sieving machine, sieves

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Bjdjycp Nlspfx Afnjwh Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.

Year of construction: 2022, condition: like new (used), functionality: fully functional, ILPRA TMF SPEEDYFORM ID.NO. 2945 Ilpra mod TMF / Speedyform deep drawing machine year mod 2022 used in small-scale production approximately 12 months.Rigid underfilm, Punch, Marking system, Cooling machine Foil 362 mm, Rejection 237 mm, Gas machine.Division 2:2 Dimensions 195 x 145 mm Max D 110 mm.Dimensions 350 x 115 cm H 165 cm. Bwsdjv R Dk Nepfx Afnoh

Condition: ready for operation (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 MAIN SPINDLE Max. bar diameter: 12 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 SUB SPINDLE Max. bar diameter: 10 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Operating hours: 47,000 Bsdpsycp Ihefx Afnowh EQUIPMENT FMB Minimag bar feeder Note: Dismantling and loading can be handled by the seller for €1,500.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device - Marker on stop side Bsdpfx Afsyfhi Njnswh - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Condition: used, functionality: fully functional, operating hours: 4,189 h, fuel type: diesel, mast type: duplex, FORKLIFT TCM FD25Z1 IZUSU ENGINE DIEZEL SHORT MAST.....START AND DRIVE..... Bwodpfx Ast U Ivtefnjh

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Swing diameter over bed: 32 mm Spindle bore: 32 mm Bwedpfox U Tchjx Afnjh Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m Connection voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Connected load: 8.0 kVA

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 89N1160, cutting width (max.): 800 mm, insertion depth: 800 mm, overall weight: 900 kg, reverse speed: 70 mm/s, TECHNICAL DETAILS Bodjycr Ikspfx Afnewh Cutting width: 800 mm Insertion depth: 800 mm Maximum operating height: 100 mm Pressing force: 180–2,700 daN Minimum cut without cover plate: 15 mm Minimum cut with cover plate: 50 mm Return speed: 70 mm/s MACHINE DETAILS Power consumption: 4.0 kVA Power supply: 400 V, 50 Hz, 2.6 A Control: 18.5" touchscreen Program memory: 1,998 jobs Total cuts: 24,551 Weight: 900 kg Table: Stainless steel with air support EQUIPMENT 1× mounted POLAR 78 1× new POLAR 78 SKH-2, 960×110×11.7 mm Process visualization Hydraulic swinging angled cut LED cutting line indicator Air table Robust machine body Ultra-fast knife change with POLAR OptiKnife New spare knife

Condition: good (used), Equipment: documentation/manual, Robot Coupe Model R45 vertical cutter mixer Two speeds 1500/3000 rpm With process timer control Bwodpfst Da Nwex Afnoh Tipping discharge 3 x blades

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: FW907009F, load capacity: 70 kg, arm reach: 2,050 mm, controller model: CR760-70VD1-1-S15, repeat accuracy: 0.07 mm, operating speed: 13,000 mm/s, TECHNICAL DETAILS Payload: 70 kg Maximum reach: 2,050 mm Repeatability: ±0.07 mm Bedpfxsycq Hxo Afnowh Protection class: IP67 Speed: 13,000 mm/s Working ranges J1 (rotational axis): 330° J2 (tilting axis): 215° J3 (arm axis): 261° J4 (wrist rotation axis): 720° J5 (wrist tilting axis): 250° J6 (wrist rotation axis): 900° MACHINE DETAILS Power consumption: 20,000 VA Power supply: 3-phase, 180-253 VAC Controller (CE version): CR760-70VD1-1-S15 Hand controller (Teaching box): R56TB (new) Dimensions & Weight Dimensions (L x W x H): 1,955 x 648 x 1,852 mm Width: 648 mm Height: 1,852 mm Robot weight: 640 kg Controller weight: 200 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol 640M, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Spindle speed: 12,000 rpm Main drive power (5 min): 18.5 kW Main drive power (30 min): 11 kW Tool Changer Number of tool stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent stations: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg MACHINE DETAILS Control: Mazatrol 640M Bsdpsya Dh Rjfx Afnjwh Interfaces: RS232, LAN, Floppy drive Dimensions & Weight Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 11,500 kg Operating Hours as of 23.05.2025 Operating hours: 6,585 h Cutting hours: 8,300 h Auto cutting hours: 8,374 h EQUIPMENT Documentation/manual Chip conveyor Relocation detector Automatic tool length measurement system Preparation for partition wall for pendulum machining 4th axis Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant, 5 bar

Condition: like new (used), Type: SEALPAC 800 Bwodpfx Ajpbv Unofnjh Capacity: 10-12 tact / min. Trays dimensions: 325 x 265 x 100 max. - 2 pc/ tact Compressed air: 8 bar - 650 l/ min. Water consumption: use of a closed circuit is recommended, ~ 4-6 Liter/min Machine dimensions: Length: 4800 mm Width: 950 mm Height: 2 100 mm Voltage: 380 / 230V Power: 10 kW

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 133, TECHNICAL DETAILS Spindle speed: 14,000 rpm Coolant supply through the spindle: 70 bar MACHINE DETAILS Year of manufacture: 2023 EQUIPMENT Direct tapping Tool magazine with 133 storage positions Pallet changer Two pallets with tapped hole grid Eight adjustable rinse nozzles at the spindle Flow monitor for coolant through the spindle Bwjdpoyarhrofx Afneh Cooling system with chip conveyor BSW880 Interface for mist extraction Visual tool breakage monitoring BTS Toolholder HSK-A63 Coolant temperature control unit Direct measuring systems (glass scales) for X, Y, Z axes Three-axis workpiece probe (Marposs Mida T25G) Double-layer cooling system (BDW 880) Automatic central lubrication Programmable axis mirroring Tool offset storage with 400 memory slots 54 (6+48) freely selectable workpiece coordinate systems Three-color signal lamp

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200912, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Bwjdpfx Afeyap Shjnsh Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: ready for operation (used), Year of construction: 2013, A two-stage reverse osmosis system with a softener from Eurowater is available. 1) Two-stage reverse osmosis system Eurowater DPRO B1-2/2, year of manufacture: 2013, max. flow rate: 1.08m³/h, pressure pipes: stainless steel, pipe system: PVC, membrane diameter: 4 inches, machine dimensions X/Y/Z: approx. 730mm/700mm/2000mm. 2) Eurowater SM 42-F softener, year of manufacture: 2015, machine dimensions X/Y/Z: approx. 1000mm/500mm/1650mm. Documentation available. On-site inspection is possible. Bedpfow Ryu Uox Afnswh

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS X-axis travel: max. 840 mm Z-axis travel: max. 425 mm Feed diameter: max. 200 mm Bodpsyap Naofx Afnewh Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 MACHINE DETAILS High-pressure pump: up to 120 bar per line Machine weight: 8,000 kg Cooling: spindle and machine bed cooling EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers