Stainless steel transport container tank

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer was €486,000 (net)! TECHNICAL DETAILS Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Ffodpfx Ageymwzdo Dow Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly duty cycle: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 g/m² up to 350 g/m² Paper weight range (validated): up to 400 g/m² Duplex printing media weight: 350 g/m² MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Main unit dimensions C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like quality Supports specialty and textured media In-line sensors for color management Automatic calibration

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Ffsdpfx Agsh Eazzo Dew Completely stainless steel Container Max 180mm wide & 250 hight as-is or tested and adjusted to costomer needs

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm Spindle speeds: 50 - 2,000 rpm Spindle torque: 3,000 Nm Spindle taper: SK 50 Feed rate - X / Y / Z axis: 2 - 2,000 mm/min Rapid traverse - X / Y / Z axis: 7,000 mm/min Table clamping surface: 2,000 x 800 mm Rotary table diameter: 800 mm Number of tool magazine stations: 56 Tool diameter (all stations filled): 114 mm Tool diameter (with 2 free positions): 200 mm Max. tool length: 400 mm Max. tool weight: 16 kg Tool change time: approx. 8 - 9 sec Control system: SIEMENS SINUMERIK 850 M MACHINE DETAILS Spindle motor power: 30 kW Ffsdpfx Aoyl U Thjg Dsw Dimensions & Weight Dimensions (L x W x H): approx. 6.6 x 3.15 x 2.98 m Machine weight: approx. 25.4 t EQUIPMENT Tool presetting device Various tool holders Chip conveyor Internal coolant supply Coolant system with high-pressure pump and filtration unit Electronic handwheel Fixators

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7F001-7, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, No reserve price – guaranteed sale to the highest bidder! According to the manufacturer, the year of manufacture is likely 2015. TECHNICAL DETAILS Measuring range X-axis: 300 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 150 mm Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Maximum traverse speed X, Y, Z-axis: 160 mm/s Measuring accuracy of optical sensor X, Y-axis: Ex, Ey = (1.6 + L/250) µm Fjdpfoyl U S Dex Ag Defw Measuring accuracy of optical sensor XY-axis: Exy = (2.0 + L/250) µm Measuring accuracy of optical sensor Z-axis: Ez = (3.9 + L/200) µm Measuring accuracy of touch-trigger probe X, Y-axis: Ex, Ey = (2.0 + L/250) µm Measuring accuracy of touch-trigger probe XY-axis: Exy = (2.5 + L/250) µm Measuring accuracy of touch-trigger probe Z-axis: Ez = (2.9 + L/200) µm Measuring volume, optical sensor X: 300 mm Measuring volume, optical sensor Y: 200 mm Measuring volume, optical sensor Z: 150 mm Measuring volume, tactile sensor X: 230 mm Measuring volume, tactile sensor Y: 200 mm Measuring volume, tactile sensor Z: 150 mm MACHINE DETAILS Metrology software: PC-DMIS Vision CCD camera zoom: 6.5x CNC motorized Dimensions & Weight Dimensions (L x W x H): approx. 705 mm x 986 mm x 890 mm Machine weight: approx. 170 kg SCOPE OF DELIVERY PC including PC-DMIS Vision measuring software Documentation / manuals Workpiece clamps / stops for securing the items to be measured Various probes included Probe change rack for storing 4 probes

Condition: good (used), We have three identical Steriflow 1351 EL retorts available for sale. 1300mm diameter, 5 trolley capacity, single door. They were bought to produce long life ready meals in plastic ready to eat trays. The three machines remain in lovely condition and can also be sold with 2 x 7 trolley Steriflow units if required. The retorts are currently stored in Finland and viewing can be arranged prior to them coming here to the UK. Fodpjw Rpaajfx Ag Dsfw

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 2183, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, controller model: GE Fanuc Series 16-M, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 450 mm Spindle speed max.: 60,000 rpm Spindle speed min.: 9,000 rpm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 900 mm/min Rapid traverse range: 0.5 – 14,000 mm/min (infinitely variable) Table dimensions: 600 x 380 mm Max. table load: 300 kg Tool holder: Collet EX 19, grinding arbors E19 MACHINE DETAILS CNC controller: GE Fanuc Series 16-M Input voltage: 400 V Control voltage: 24 V Power consumption: 7,500 W Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,250 x 4,000 x 3,250 mm Total weight: 4,500 kg EQUIPMENT Documentation/manual Ffedpfx Ajyl U Nveg Djw Extraction system Coolant system Sealing turbine

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 15,513 h, machine/vehicle number: 31662, controller manufacturer: Cadman, bending force (max.): 137 t, working length: 3,100 mm, TECHNICAL DETAILS Pressing force: 1,350 kN Working length: 3,100 mm MACHINE DETAILS CNC control: Cadman Axes: Y1, Y2, X, X1, R, Z1, Z2 Ffsdpfx Ageylwg Do Dsw Operating hours Total on-load hours: 15,513 h Motor running hours: 28,347 h EQUIPMENT CNC crowning Angle measuring system (not connected) Wila hydraulic upper and lower clamping

Condition: good (used), overall dimensions 3300x2600x2450 mm; bowl 330 ltr; power supply 400 V, 50 Hz; total power 115 kW / 150 A; knives speeds 550/975/1950/2500/3200/4100 rpm, main motor 103 kW DC; bowl speeds 4/8/12/16 rpm, bowl motor 1,2 kW; mixing speeds -65/-130 rpm with revese, hydraulic system 5,5 kW; loader; Ffsdpfx Ael Dmpasg Djw unloader; vacuum pump Busch 250 m3/h, 5,5 kW; weight 5600 kg.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Delem DA 66W, bending force (max.): 234 t, overall weight: 20,000 kg, working length: 4,300 mm, TECHNICAL DETAILS Bending force: 2,300 kN Working length: 4,300 mm Distance between uprights: 3,700 mm Fodpfx Aoylwbhjg Dofw MACHINE DETAILS CNC control: Delem DA 66W CNC-controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Power: 26 kW Voltage: 230/400 V Weight: 20,000 kg EQUIPMENT CNC crowning system Hydraulic Wila New Standard upper and lower clamping

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 9550006, bending force (max.): 254 t, stroke length: 265 mm, overall weight: 18,900 kg, working length: 4,100 mm, TECHNICAL DETAILS Working length: 4,100 mm Pressing force: 2,500 kN Max. stroke: 265 mm Rapid traverse speed: 190 mm/s Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Electrical data Main motor power: 22 kW Total connected load: 26 kW Line voltage: 3 PH 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Rated current: 63 A Ffsdpfx Asylv T Nsg Dsw Weight: 18,900 kg EQUIPMENT Bending aid

Condition: excellent (used), Year of construction: 2016, The NovaMax660 is the next generation of advanced slide-plate forming technology. This state-of-the-art servo driven system is suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high volume processors forming popular products such as burger patties, pork sausage, chicken filets and chicken nuggets. The high throughput and reduced cost of ownership will assure a rapid return on your NovaMax660 investment. Fsdpfx Aovl Evvjg Dsfw Forming Style: Slide plate Typical Throughput*: 9,000 lbs/hour | 4,082 kgs/hour Line Width: 660 mm Speed: Standard speeds of 25-100 strokes/min (SX up to 120 strokes/min) Feed hopper Capacity: 1,100 lbs | 500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 4,970 h, machine/vehicle number: HFP 130-3 N050242, bending force (max.): 132 t, stroke length: 200 mm, overall weight: 8,170 kg, working length: 3,100 mm, TECHNICAL DETAILS Pressing force: 1,300 kN Max stroke: 200 mm Working length: 3,100 mm MACHINE DETAILS 8-axis configuration: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Weight: 8,170 kg Ffodpfx Asylv Rheg Dsw Voltage: 400 V Frequency: 50 Hz Rated current: 213 A Operating hours: 4,970 h EQUIPMENT Automatic Fiessler Alas laser system Euro-style tool clamping with quick-change adapters

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 66654, sheet thickness (max.): 6 mm, working length: 4,050 mm, TECHNICAL DETAILS Working length: 4,050 mm Maximum sheet thickness: 6 mm MACHINE DETAILS Voltage: 380 V EQUIPMENT Electrically adjustable back gauge Electrically adjustable cutting angle Electrically adjustable blade gap Electrically adjustable blade gap Fjdpfoylv Nwjx Ag Djfw

Year of construction: 2022, condition: new, 20 New Tote Bins Capacity 200 ltr Fjdpfx Ajh N D Efsg Djfw All stainless steel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 20345, sheet thickness (max.): 10 mm, working length: 4,000 mm, TECHNICAL DETAILS Max. sheet thickness: 10 mm Working length: 4,000 mm MACHINE DETAILS Fodpjylv Itefx Ag Djfw Voltage: 380 V 50 Hz EQUIPMENT Electric backgauge