Straightening Press - Single Column

MÜLLER CR 25.2.1

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 500 mm z-travel 500 mm total power requirement --- kW Cgsdpfx Ajycxinecvjr weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Year of construction: 2003, condition: used, pressure 100 t stroke 10-130 mm no. of strokes 30-90 Hub/min throat 330 mm ram - range of adjustment 100 mm table surface area 950x660 mm ram surface 540x440 mm hole in the table Ø 230 mm Cgedora Rr Eepfx Acvor table height 1000 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 7 t

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Cjdpfx Ajhigmbocvegr Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Csdpsx Srphofx Acvjgr

Condition: good (used), Year of construction: 2000, max. ram stroke 2 - 300 mm groove width 2 - 32 mm power capacity 8 kW no. of strokes 2 - 300 Hub/min throat ca. 300 mm Max. installation height ca. 450 mm automatic feeds 0,01 - 0,15 mm work speed 0 - 30 m/min return speed 30 m/min weight of the machine ca. 2,2 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m The BALZAT keyway jointing machine is characterised by the following advantages: - Infinitely variable adjustment of the jointing speed with constant return, even during the work process - Simple clamping of the workpieces with standard clamping devices, without additional tool holders Csdpfx Asuayibecvegr - Extreme dimensional accuracy thanks to self-centring, centrally arranged blade holders - Feed rate can be changed during the programme sequence - Machine base is also a container for cutting oil - all components are easily accessible and replaceable

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Application Types Turning Cgsdpfxox D Nfuj Acver

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation Cgedpfx Aetiwgiocver

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Cgedpswwv Ifefx Acvsr Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Documentation

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Cgjdpfx Acjtwliwovor Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: like new (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, overall weight: 1,500 kg, fuel type: diesel, color: black, output current: 228 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 120 kW (163.15 HP), nominal power (apparent): 150 kVA, total length: 2,550 mm, total width: 1,110 mm, total height: 1,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: John Deere, type of cooling: water, Brand: SDMO Model: J165 Year of manufacture: 2012 Serial number: On request Cgedpfx Aceydk D Tsvsr Operating hours (indicated): Low hours Capacity (kVA): 150 - 174 (60Hz) Capacity (kW): 120 - 139 (60Hz) Engine brand: John Deere Engine model: 6068HF120 Fuel: Diesel Alternator brand: Leroy Somer Alternator model: LSA44.2M95J 6/4 Voltage: 230-400V Frequency (Hz): 50 - 60 RPM: 1500 - 1800 (60Hz) Amperes (A): 228 Dimensions LxWxH (mm): 2550 x 1110 x 1500 Weight (kg) approx.: 1500 Units in stock: 1 Made in: France Comments: Low hours, ex-emergency set, in good working condition.