CNC turn-mill center

Müga TT 42

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Kwodoxuqv Ajpfx Adtst Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours Kwedpovivx Nofx Adtjt *

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): Kwodjxflxajpfx Adtet CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Kjdpfxswzx Nto Adtowt Indexing clamp Rotary carousel table D=1600 mm, 250 rpm Table area 6000 x 2000 mm Face slide, etc.

Condition: new, BRAND NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control with 19" screen HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 650 mm Y-axis: 700 mm Z-axis: 645 mm Table size (diameter): 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Ksdpfxehy Arte Adtjwt Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer with double gripper: 30 positions (optional up to 80 tools) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 Kedpouhampefx Adtewt - Number of spindles : 2 MAIN SPINDLE - Spindle power : 15 [kW] - Spindle speeds : 5500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 15 [kW] - Spindle speeds : 5500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.001 [°] - Travel : 330 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 410/400 [mm] - Y stroke : 200 [mm] - B Axis stroke : -25/+115 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK40 - Spindle speeds : 30000 [rpm] - Spindle power : 8 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 60 - Tool exchange time : 1.2 [sec] - Number of positions : 60 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3300 x 2900 [mm] - Machine height : 2100 [mm] - Machine weight : 5000 [kg] MACHINE HOURS - Number of working hours : 11659 [h] EQUIPMENT - CNC : Fanuc 31i model A5 - Linear scales - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle - Oil mist extractor : ELBARON RON/A 100 DV - Spindle cooling unit - Workpiece probe : Renishaw OMP40-2 - Parts catcher - 1 NAKANISHI HTS1501S spindle : 150.000 [rpm] - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Bar puller

Condition: used, Article: clamping head Kodpon H Nzujfx Adtewt Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (min.): 16,000 rpm, The machine is in good technical condition, featuring a Heidenhain TNC 426 control system, a magazine for 20 HSK 63 tools, including a probe + 4th axis. Kedpfx Adoxfg Ayetjwt

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor Kedpfx Adjxcp Sletjwt - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: new, workpiece weight (max.): 3 kg, rotor diameter: 400 mm, rotor length: 300 mm, High-Precision Rotor Balancing for Small Batch Production. The 9A710 balancing machine excels at balancing various rotor designs up to 3 kg. Its exceptional accuracy and high sensitivity allow you to detect and correct even the slightest imbalances. This makes it ideal for single-piece and small-batch production, ensuring smooth operation of your rotors. Key benefits: • High precision: Detects minute imbalances for optimal performance.   • Wide application: Handles diverse rotor designs within the weight limit.   Kedpfxou Urwgj Adtewt • Simple & reliable: User-friendly design ensures long-term operation. • Increased productivity: Streamlines balancing processes in small-scale settings. Originally designed for small-batch production, the 9A710's versatility makes it a valuable asset in repair shops as well. This machine is perfect for balancing: • Small motors & generators • Shafts for various mechanisms • Impeller fans & pumps • Precision machine tool components • Rotating drive elements ! Upgrade your balancing capabilities and achieve exceptional results with the 9A710. SPECIFICATIONS Weight range of balanced rotors 0.03 - 3 (5) kg Maximum rotor diameter (above the bedding) 400 mm Distance between centres of rotor supports 4 – 300 mm Support type Prisms Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.1 g*mm/kg Rotor speed range 600 – 3000 rpm Electric motor power 0.09 kW Parameters of the supply network 220V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇