Band Saw - Vertical

MÖSSNER Rekord SM 420 A

Condition: new, Year of construction: 2025, Device description Pgjdpfswnxcmsx Ag Dsw The splitter has an overload valve that drains oil to the tank and an efficient, failure-free gear pump. The tree lifting system makes it easier to place heavy materials directly under the splitting wedge 5-pin power connection The wedge set at an angle makes it easier for the wedge to sink into the material. FAILURE-FREE HYDRAULIC PUMP 24l! Technical parameters Pressure force 22 TON Minimum wood diameter 80 mm Maximum wood diameter 700 mm Minimum wood length 350 mm Maximum wood length 1100 mm Splitting speed (continuously adjustable) 10.5 cm/s Return speed 7.5 cm/s Wedge stroke length 948 mm Total engine power (S1;S6) S1:5.1 kW S6: 6.6 kW Voltage 400 V Hydraulic tank capacity 24 l Hydraulic system pressure 27.7 Mpa Dimensions 1050 x 1550 x 2500 mm Weight approx. 320 kg

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller - working position horizontal and vertical (optional) - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm Podpfx Asdktnvog Dogw - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm - weight: 85 kg - dimensions: 530x420x500 mm

Condition: new, Optimum OPTIdrill D 23Pro (400 V) special offer set bench drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 680mm Column diameter 73mm Width/depth (product) approx. 350mm Height (product) approx. 1015mm Weight (net) approx. 63.5kg Pedpfet N Ivvex Ag Degw Drilling capacity Drilling capacity steel (S235JR) 25mm Continuous drilling capacity steel (S235JR) 20mm Drilling table Drilling table work surface length 280mm Drilling table work surface width 245mm Drilling table T-slot size 12mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drilling table max. 425mm Speed range Speed range 200 - 2440min¯¹ Number of speed ranges 12 Electrical data Drive motor power 0.75kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max. 618mm Machine foot working surface length 240mm Machine foot working surface width 250mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 170mm Spindle Quill stroke 80mm Spindle holder MK2 throat 180mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Morse taper MK 2/B16 T-nuts Machine vice BMP

Condition: good (used), Year of construction: 1994, working width: 1,200 mm, pressing force: 25 t, working range: 1,200 mm, High Quality Used AMADA PROMECAM ITS2 25-12 1.2metre x 25ton cnc pressbrake for sale Pjdpfjrhirzsx Ag Djgw Year 1994 Specification 25 TONS X 1250 HYDRAULIC UP STROKING 3 AXIS CNC PRESS BRAKE COMPLETE WITH HURCO AUTOBEND 7 CNC CONTROL description TYPE HYDRAULIC UPSTROKING CONTROL HURCO AUTOBEND 7 BENDING PRESSURE 25 TONS BENDING LENGTH 1250 STROKE LENGTH 100 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS Y X AND R SIDE FENCING REAR INTERLOCKED

Condition: used, functionality: fully functional, spindle bore: 41 mm, turning length: 1,000 mm, Amutio Cazeneuve Lathe Model HB 500, 1000mm e.p. Max diameter on bed 500 mm, max diameter on cross slide 300 mm, shank hole 41 mm, 18 speeds from 25 rpm to 2000 rpm. With Fagor dimension display, with fixed and mobile rests, with protections, connected to 220 V Podpfov Rnfqsx Ag Degw

Condition: used, Year of construction: 1997, Vertical bandsawing machine Make: MÖSSNER Model: SM 320 Type A Pedpfsr En D Sjx Ag Degw Year of manufacture: 1997, workshop tested machine no.: 29219 Accessories: - IDEAL strip welding unit BSS016 with shears and grinding motor - Set (= 2 pcs.) HM band guides for saw band width 6 mm x 0.65 mm - Machine light - Wheel doors electrically secured - Foot switch on/off - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: new, Motor power 1,2 kW 50Hz/400V belt opening belt dimensions 2450 x 27 x 0,9 mm Pgjdpfx Aogrlapjg Djw weight 240 Kg Speed 35 + 70 m/min. cutting surface 0° 220 / 210 x 150 / 230 x 185 mm Cutting surface 45° right Cutting area 45° left 150 / 150 x 150 / 150 x 210 mm Cutting area 60° right Cutting area 60° left 90 / 90 x 90 / 90 x 100 mm Description The Zimmer Z241/R is a self-lowering saw for mitre cuts from 0° - 60° left. After the cut the machine stops by a safety limit switch. The lowering is infinitely variable via a hydraulic system. The saw arm can be raised to any position after the cut. The saw arm remains in the desired position. The Z241/R has the following equipment: Hydraulic cylinder, emulsion pump, eccentric clamp, base frame, saw band, 400V plug -16A-. The machine is delivered completely assembled and ready for immediate use. Footprint: 870 x 1550 x 1740 mm Working height: 915 mm please ask for further versions

Condition: new, Band saw Bernardo HBS 460 N - 400 V Technical Specification Cutting width 465 mm Cutting height 280 mm Sawband dimension 3607 x 25 x 0.6 - 3 ZpZ Saw widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Table dimension 480 x 630 mm Table height 970 mm Saw table inclination -5° to 45° Suction connection of 2 x 100 mm Engine power S1 100% 2.2 kW (3.0 hp) Motor recording power S6 40% 3.0 kW (4.0 hp) Voltage 400 V Machine dimensions (W x D x H) 1050 x 800 x 1950 mm Weight approx. 162 kg Delivery • Saw band • Longitudinal stop with magnifying glass Pgodod N S Urepfx Ag Dow • Miter stop • Drive wheels made of aluminium • Ball-bearing saw band guide • Motor incl. brake • Sliding stick • Operating tool

Condition: used, roll diameter / mm Pgjdpfx Agouddmrj Djw throat / mm workpiece height / mm Table dimensions: 615x615mm

Condition: used, Year of construction: 1977, roll diameter 320 mm throat 310 mm workpiece height 230 mm table-size 505 x 505 mm cutting speed 12 - 375 m/min Psdpsvnv S Tsfx Ag Dsgw turning speeds U/min saw band length 2 mm voltage 400 V total power requirement 1,3 kW weight of the machine ca. 420 kg dimensions of the machine ca. 0,80 x 0,80 x 1,65 m - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp