Run press

LVD PPEB 110/42

Condition: used, Year of construction: 2021, Max. pressure 100 ton Max. bending length 3060 mm Distance between uprights 3384 mm X-axis movement 600 mm Length of stroke (extended) 350 mm Daylight (Extended) 580 mm Automatic crowning on lower tool base Controlled axis: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Control: Kdjdjxr U Nhspfx Ag Ujg Trumpf T3500T (3D colour/grafic visualization ) Equipped with: Tool package for 15.000 euro. 2 manual “lay up” arms Trumpf manually quick clamp top tool holders in full width - made by Wila Machine appears as brand new. Price when bought in 2021: Euro. 115.000

Condition: new, Year of construction: 2025, BIEGEMASTER double bender - Model XBend 6.1,25 Effective length: 6400 mm Bending capacity Steel 400 N/mm²: 1.25 mm V2A 600 N/mm²: 1.00 mm Kedpfovhc Dpox Ag Ujdg Aluminum 190 N/mm²: 2.00 mm Clamping capacity (closed seam): 0.5 mm steel Number of uprights: 4 pieces Driven upper bending joints: 4 pieces Driven bending joints bottom: 4 pieces Incl. touchscreen CNC control with automatic depth stop Incl. electric shears BIEGEMASTER Up- and Down- Bending machine - model XBend 6.1,25 Working length: 6400 mm Bending capacity steel 400 N/mm²: 1.25 mm stainless steel 600 N/mm²: 1.00 mm aluminum 190 N/mm²: 2.00 mm Hemming capacity (closed hem): 0.5 mm steel Stands + Tension Arms: 4 pcs. Driven linkage joints upper beam: 4 pcs. Driven linkage joints down beam: 4 pcs. Incl. touchscreen control and automatic back-gauge Incl. electric cutter

Condition: new, Technical specification: - Chamber volume: 990 litres - Power supply: 230V ~ / 50Hz - Nominal operating pressure: up to 10 bar - Cleaning capacity: up to 15 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air requirement: 3500 l / min (for 4.0 mm nozzle) Kodpfx Asft Srceg Uodg - Maximum air flow: up to 12,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve vacuum BRAGO - Gun: vacuum CTR - Working area dimensions: 1 600 x 870 x 730 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 250 kg - Illumination: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: powder coating - Working temperature: 10 to + 50 degrees Celsius - Inspection valve: Yes - In the picture an example of the configuration of the SCI-800-10 FA The offer includes: - Land Reko SCI-800-10 FA Chamber Cleaner Automatic. - Boron carbide nozzles 8 pcs. Big choice between 4 mm and 10 mm - Pneumatic connections - Control panel with inverter system - Roller conveyor with automatic drive 1,5 Lm x 2 - Working pressure control system for sprinkler sections - Automatic sprinkler and grinding valve x 8 - Workpiece blowing system after processing - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months warranty for contractors - Free delivery - Device also available in leasing or financing - Device on order. Delivery time 8 weeks from order

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,818 h, machine/vehicle number: 24698, control type: CNC control, actuation type: hydraulic, controller manufacturer: Delem DA-66T CNC CONTROL UNIT, bending force (max.): 200 t, working width: 4,000 mm, throat depth: 410 mm, oil tank capacity: 55 l, overall weight: 12,500 kg, power: 18.5 kW (25.15 HP), input voltage: 415 V, Equipment: documentation/manual, emergency stop, lower tooling, upper tooling, CNC Press brake Baykal APHS 41200 10/27 in excellent condition listed for sale! Year of production is 2017. Press brake comes with variety of prisms and tools, which can be seen in pictures. Specifications: Control Unit DELEM DA66T CNC Kdjdpfx Asxl Ddheg Ueg Nominal Pressure 200t Length of Work Table 4100mm Distance Between Columns 3550mm Throat Depth 410mm Maximum Open Height 530mm Ram Stroke 260mm No. of machine Axis:5 Safety Guarding System Laser System Type Backgauge Travel 750mm Motor Power 18.5 / 24.6 kW / hp Motor Voltage 415V Nett Weight 12,500kg -The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of today’s press brakes. Ease of use combined with state-of-the-art technology go hand in hand, improving productivity. The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application. The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling. Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever. -Baykal machine frames are manufactured from hot rolled steel sheets of Fe 520. The two side frames are obtained from the same sheet to ensure the same elasticity under stress. The ram and table are also manufactured from Fe 520 steel and are designed to avoid deflection. -The hydraulic cylinders are manufactured from high resistance steel chromium plated & ground to size. Cylinder pistons are lapped to ensure longevity of the hydraulic seals -The hydraulic unit consists of electronically controlled proportional valves with independent closed loop control of the two cylinders providing full synchronous control. -German manufactured Laser Safety Guard System mounted at each end of machine ensuring correct interfacing and operator safety whilst in operation. The Laser system is designed so each guard will slide up or down to allow for many different types and sizes of tooling enabling safety at the appropriate points as required by the Australian standards. Manual height adjustment with scales and lock for easy positioning. -Sliding front sheet supports enable a wide range of material sizes to be aligned and supported at the correct required width and height. The sheet supports are mounted on precision linear guides for ease of movement. This design can also be adjusted vertically to support material with return bends. -Ram positions (Left & Right) are obtained from independent linear encoders whilst monitoring and adjusting proportional valves. This produces a closed loop system, with guaranteed beam positioning of +/- 0.01mm (Y1 and Y2 Axis) -Accuracy is further ensured by mounting the linear encoders on a C-frame connected directly to the Bed, rather than the side frames. This ensures that deflection of the side frames and uneven loads have no effect on Beam position.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 17,000 h, control type: CNC control, bending force (max.): 120 t, working width: 3,060 mm, overall weight: 8,300 kg, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, A solid simple press brake with low working hours in good condition. Demonstration under power is possible. No tools included! Free loading onto truck. Kjdpox Nax Eefx Ag Usdg

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Lenze, controller model: 9300, bending force (max.): 150 t, working width: 4,520 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 3,200 mm, installation height: 950 mm, operating speed: 90 mm/s, travel distance X-axis: 1,000 mm, back gauge adjustment: CNC-controlled, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, overall weight: 15,000 kg, total length: 4,520 mm, total width: 1,900 mm, total height: 2,950 mm, input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, Safan press brakes are reputable sheet metal working machines from the Dutch manufacturer, well recognized in the market. The SAFAN E-Brake series is equipped with electric drives, which have been successfully implemented in our machines for almost 30 years. Currently, the largest model of electrically driven presses is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Lenze motors and servomotors, controlled by long-life inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to its innovative drive, the machine uses electrical energy primarily during the downward movement of the ram and the bending process. The return of the ram is achieved by the force of springs mounted on both sides of the machine. Additionally, during idle periods, the machine consumes virtually no electricity, as the system does not include a hydraulic pump motor maintaining pressure, as is the case with hydraulic presses. Energy consumption is estimated to be up to 70% lower compared to conventional hydraulic presses. Furthermore, the electric drive is insensitive to temperature fluctuations that may occur in production halls. The machine performs excellently in both long and short production runs. Safan E-Brake 150-3100, model year 2007 - Safan TS 1 controller - 2D bending system - 13” color touchscreen - Control panel on a movable arm - CNC-controlled Y1/Y2 axis - CNC-controlled X axis Kjdpfx Ajx Ewnpsg Uodg - CNC-controlled R axis - CNC-controlled Z1 + Z2 axis - Wila upper tool adapter (mechanical clamp) - Safan OBS/3 lower tool table (compatible with Wila and Promecam tools) - Lightguard safety system with upper beam descent control - Work area lighting at the front and rear of the machine - Electrical installation: 3/N/PE 50 Hz 400/230 V - Opening: 690 mm - Table length: 3060 mm - Distance between machine frames: 3300 mm

Condition: good (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, bending force (max.): 66 t, working width: 2,040 mm, stroke length: 200 mm, distance between stands: 2,364 mm, Delem CNC control controlled arrester 1 set upper and below tools at 2m length Technische Daten / technical details: Druck / pressure 66 to Abkantlänge / bending length 2040 mm Durchgang zwischen den Ständern / distance between columns 2364 mm Hub (Y-Achse) / stroke (Y-axis) 200 mm Verfahrweg X-Achse / travel of X-axis 600 mm Verfahrweg R-Achse / travel of R-axis 150 mm Gewicht / weight 5700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Kedpfsx Tgmkjx Ag Uodg Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of manufacture: 2005 Serial number: 8293 Press force: 120 t Bending length: 3100 mm Max. stroke: 260 mm Operating pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Machine weight: 7,500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm Kodpfxoxna S Hj Ag Uodg