Hydraulic plate shears

AMADA GPX 840

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 4,050 mm, cutting angle (min.): 2 °, cutting angle (max.): 10 °, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Kedpfoxxr H Rox Ab Tolt Sheet width: 4,050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Electric back gauge: 1,000 mm MACHINE DETAILS Machine weight: approx. 10,100 kg EQUIPMENT Support arms for material Sheet lifting device Scrap container Cutting gap and angle adjustment via the control system

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Sawing machine for the foam industry, Type Panda 400, M80, 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Kedpfx Asw Iwaijb Tolt Total dimensions 1155 x 100 x 140 cm (with roller tables), Dimensions without roller tables: 71 x 100 x 140 cm.

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Ksdpfx Aeyyybhsb Tjlt Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2023, sheet thickness steel (max.): 10 mm, cutting length (max.): 3,050 mm, Technical specifications Cutting capacities: Kledpfxert Uv Es Ab Tjt Maximum cutting length: 3100 mm Maximum thickness for mild steel: 10 mm Maximum permissible thickness for stainless steel: 6 mm Overhang: 50 mm Adjustable cutting angle: 1.5 degrees Number of hold-down devices: 16 Hold-down force: 22 tons Adjustable backgauge: up to 1000 mm Speed of the back gauge: 200 mm per second Drive and dimensions: Motor power: 22 kW Oil tank capacity: 200 liters Support arms: 2 pieces Worktable height: 865 mm Worktable width: 580 mm Worktable length: 3515 mm Machine dimensions (LxWxH): 4200 mm x 2250 mm x 2100 mm Weight: 9300 kg Total width incl. support arm and safety guard: 3600 mm Equipment features Design with pendulum cut for precise results Intuitive NC control (D-Touch 7) with touchscreen for settings such as backgauge, cutting length and number of pieces, including USB connection Motorized backgauge mounted on ball screws with a reach of up to 1000 mm, can be folded up for maximum flexibility Clear control panel on the swivel arm for convenient control Hydraulic hold-down device for optimized cutting results, positioned close to the cutting edge Foot pedal for easy operation Centrally adjustable cutting gap adjustment for different material thicknesses Cutting line lighting for increased precision Large support table with sliding balls for material handling Counter for number of cuts Options for single and series cutting Folding finger guard and side stops for safe working Easily replaceable and resharpenable blades for long-lasting sharpness Adjustable cutting length for efficient processing and minimum material consumption Low-maintenance design with easily accessible oil filling Safety light barriers at the rear of the machine for increased occupational safety Professional customer service Operating instructions in GERMAN and ENGLISH Complies with the current CE safety regulations

Condition: excellent (used), Technical data: Working length: 4100 mm Frame width: 3650 mm Pressing force: 220 tons CNC control: OPERATOR OPII graphic Color display size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motorized adjustable backgauge Throat depth: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Kjdpjykkrksfx Ab Telt Accessories: AMADA tools (new) The seller is not liable for typographical or data transmission errors. The machine is in a condition regarding appearance, technology, and wear appropriate to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. Kodpfx Asv D A Imob Tolt If you have any additional questions, we will be happy to answer them.

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t Kledjvc Akljpfx Ab Tot dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: excellent (used), Year of construction: 2010, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstroke CNC Press brake Year 2010 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Kjdpeu A Dgrofx Ab Telt Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 2002, Beringer BPx4 ergo Useful volume 6cbm tested, serviced, fully functional Can be painted in the desired RAL color. Noes3koku We would be happy to make you an offer including delivery. Kedpfxjtp Hnwe Ab Tjlt

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist Kodpfjtlzdqox Ab Tslt -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit