Stamping and Punching Machine

LVD DELTA 1500 LB-TK

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: cream white total width: approx. 2.200 mm total height: approx. 1.200 mm mesh size: approx. 60 x 50 mm Frame profile dim. (width): approx. 20 x 20 mm Frame profile dim. (height): approx. 15 x 15 mm wire thickness: approx. 3,00 mm weight/pc.: approx. 8,14 kg Internal designation: RW-2 Knedpfx Ajm E I Nvja Esf

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Kodjuthz Topfx Aa Ejnf Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Year of construction: 2023, condition: as good as new (ex-display), Exhibition machine. Can be viewed and tested by appointment. Automatic transfer of distance dimension, rim diameter and rim width (3D function). Operation via ergonomically arranged front control panel, large shelf with numerous compartments Digital and optical position display of weights via LED monitor and Duo-Laser (LPS) 12 / 6 o'clock Static/dynamic, ALU programs, ALU weight optimization and rear spoke placement Quick nut clamping with 40 mm shaft diameter, easy attachment of adhesive weights via pedal-operated parking brake and measuring finger, integrated wheel interior lighting Kodpfjn R I Hzsx Aa Esnf Wheel protection with automatic start-stop function Precise work thanks to state-of-the-art microprocessor control system Ideally suited for passenger car wheels, with optional accessories also for motorcycle and light truck wheels Center hole diameter rim 45 - 130 mm Measuring tolerance ± 1 g Measuring time 7 s Measuring speed 180 rpm Rim width 1,5 - 20 " Rim diameter 12 - 24 " Max. Wheel diameter 900 mm Max. Wheel weight 65 kg Drive power 0,25 kW Operating voltage 230V / C16A Self-collection or transport available.

Condition: new, Year of construction: 2025, 3 axis welding rotary table Protec KT 10 000 HV with height adjustment Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Knsdpfx Aomk T Rbja Ejf Tilting range 0 to 130 dimensions: height tilted min: 1050mm height tilted max: 2200mm height horizontal min: 1360mm diameter of the clamping disk 2000mm length 3250mm, width 1700mm speed from 0,05 to approx. 0,6 rpm.

Condition: good (used), Year of construction: 2010, laser power: 4,000 W, Trumpf 5 axis laser machine, Year of manufacture 2010, Siemens control, travel X/Y 4000/1500 mm, 1 burning head, laser power 4 KW, Laser On 47950 hours, beam on 6200 hours, ADC cutting head 155 mm, Positioning laser diode, Teach panel, power cycles, Kodpfovbdy Ejx Aa Ejnf Trumpf remote connection, Machine weight approx. 19,000 kg,

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Kodpfxju Hxmze Aa Eenf

Year of construction: 2023, condition: new, B&D BXGND7900E generator set range, 3000 rpm, soundproofed, equipped with diesel engines and electric starting system. Maximum power: 7.9 KVA /// 5.7 KW Continuous power: 7.5 KVA /// 5.4 KW 160KG L= 920mm W= 520mm H= 720mm giri/min - rotational speed 3000 Frequency Hz 50 Voltage 230/400 V DIESEL (EURO V) electric start Engine power Hp (kw) 12 (8.8) cylinder 1 cooling system air Precautions Low oil level Mechanical speed controller Fuel type Diesel Fuel consumption 75% of the load Lt/h 2.1 Tank capacity Lt 14 Voltage regulation AVR Voltage Accuracy % ± 1% - 1 CEE socket 16A 3pole 230V single phase - 1 CEE socket 16A 5pole 400V three-phase - 1 230V single-phase Schuko socket with thermal circuit breaker - Differential protection - Voltage selector switch (400V three-phase or 230V single-phase) - Quick connector for external ATS Kjdekt U Sbepfx Aa Eenf - Key block 0 / I / AUTO - LED multimeter: voltmeter, ammeter, KWmeter, frequency meter and hour meter - grounding point - Automatic engine preheating

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function Ksdpounh D Djfx Aa Ejnf - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. Kodpfx Aaep Am T Us Eonf The stand is ready for launch.

Condition: good (used), Manufacturer CLEARING Model S4-900-180 Condition Used Stock No.0274 Thrust: 900 ton. Thrust points No. 4 Plunger Slide stroke 940 mm. Slide adjustment 762 mm. Number of strokes/min No. 16 Kjdpfx Aaetzy R Nj Eonf Mold clearance at PMI 1,412 mm. Slide size 4,572 mm. x 2,438 mm. Table size 4,572 mm. x 2,130 mm, Pull-out carriage Present Useful front passage 4,622 mm. Side passage in the shoulder 1,400 mm. Hydraulic Safety Present Cushion in the Basement Present Bottom plate press stroke 280 mm.