Lathe-conventional-electronic

LÖW W722

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm Bwsdpfxow Dvkae Afnoh --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min Bwsdou Tq U Ispfx Afnjh range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Bwsdjxd Tikopfx Afnsh Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: good (used), Year of construction: 2019, CNC Turning and Milling Center Machine type: Spinner TC 800 - 85 MCY Control: Siemens 840 D Shopturn Year of manufacture: 2019 Available from: immediately TECHNICAL DATA: Max. turning length: 900 mm Turning diameter: 500 mm Spindle speed range: 2,600 – 4,000 rpm C-axis Bar capacity: 85 mm Tailstock Travel: X-axis: 360 mm Y-axis: -55 / +65 +/- mm Z-axis: 900 mm Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: BMT 65 Equipment: Chip conveyor Electronic handwheel Bwedpexdc Suefx Afnjh

Condition: good (used), functionality: fully functional, turning diameter: 655 mm, turning diameter over bed slide: 655 mm, turning length: 5,000 mm, Swing diameter over bed 655 mm Swing diameter over support 390 mm Turning length 5000 mm Spindle bore 82 mm Bwodpfxew N D T Ss Afnoh Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model Bwodpfelc Dwvsx Afnjh 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: good (used), Year of construction: 1980, travel distance X-axis: 1,985 mm, travel distance Y-axis: 1,620 mm, travel distance Z-axis: 1,330 mm, table load: 10,000 kg, table length: 1,700 mm, table width: 1,520 mm, incl. universal milling head incl. spindle extension Bsdpfx Ajwrn Imjfnewh incl. angle plate height 1400 mm incl. digital read out sytem X - Travel: 1985mm Y - Travel: 1620mm Z - Travel: 1330mm W - Travel: 410mm Table Length: 1700mm Table Width: 1520mm Table load: 10000 Speeds / ranges:2,5 - 1000Rpm Spindle Taper: iso 50ISO/Bt/Mk Length: 460mm Width: 4800mm Height: 6000mm Weight: 25000kg

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Bedpfx Ajwudhuefnewh Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables Bwodpfx Aerz Nfljfnoh - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm Bedpfx Afjb Tdquonswh clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t