Universal Tool Room Milling Machine

Kunzmann WF 7/3

Condition: good (used), Year of construction: 2007, Technical Data TNC 320 CNC control system XYZ: 600/400/400 mm SK 40 Gearbox: 1125 - 4500 rpm Drive: 5.5 kW Dodpfx Ajzb Iphjhgeci Horizontal/vertical 90-degree quill, stroke 60 mm Coolant tank: 70 liters Various tool holders

Condition: new, Year of construction: 2026, grinding length: 700 mm, grinding width: 400 mm, COSMOS E 7040 NC Precision Surface Grinding Machine, grinding area 700 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, very user-friendly, incl. magnetic chuck 700 x 400 mm with adjustable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, fine grinding, spark-out and retraction, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to provide on-site installation and training as well as subsequent service! Financing / leasing available upon request – we will gladly provide an offer! Dsdpjrwwt Ssfx Ahgoci

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Y-Axis: 400mm Dcodpfxswq Ndgj Ahgsi Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Length: 2800mm Width: 2400mm Height: 2100mm Weight: 2000kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 370483, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN TNC 124, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Table length: 800 mm Dsdpfxsyhnmts Ahgsci Table width: 425 mm Max. workpiece weight on table: 250 kg Distance between vertical spindle and table: 560 mm Spindle taper: SK 40 Max. spindle speed: 5,000 rpm Swiveling range vertical milling head: ± 90° Feed rates: up to 2,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Vertical quill stroke: 60 mm MACHINE DETAILS Control: HEIDENHAIN TNC 124 Connection: 50 Hz 3x 400 Volt Milling spindle motor: 5.5 / 7 kW Total power consumption: 15 kVA Dimensions & Weight Machine weight: approx. 1,800 kg Dimensions (L x W x H): 2,100 x 1,800 x 2,050 mm EQUIPMENT Rigid angle table Electronic handwheel Heidenhain probe Vertical milling head Full splash guard cabin Coolant system Machine lamp

Condition: new, Welding turntables increase work flexibility, productivity, and quality. They also assist the welder during the work process, thus guaranteeing a safe working environment and improved work ergonomics. The main advantage of PEMA turntables is that the workpieces can always be positioned in the optimal welding position. This can increase welding productivity by up to 70%. Dcodpfx Aog Urz Hehgei For 50 years, we have been designing and manufacturing welding turntables for demanding and heavy workpieces, providing productive and high-quality welding solutions for half a century. Pemamek’s welding turntables are a combination of modern design and reliable, efficient technology, and can be easily integrated into any other PEMA solution. Each of our welding turntables is designed internally and manufactured with high-quality components. We are the PEMA representative for southern Germany. We still have some of the older generation APS tilting-rotating tables in stock. The new generation APSI tables are already in stock.

Condition: used, Year of construction: 1996, functionality: fully functional, Universal Milling Machine Kunzmann WF7/3 CNC with Heidenhain TNC 124 Control – Excellent Condition!! Technical Data: • Year of manufacture: 1996, Machine No. 370173 • Rigid angle table • Infinitely variable spindle speed up to 3,700 rpm • Feeds on 3 axes, continuously variable from 0 to 1,000 mm/min • Travel distances X/Y/Z: 600/400/400 mm • Rapid traverse X/Y/Z: 5 / 5 / 4 m/min • Table surface: 650 x 350 mm • Table load capacity: 300 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 • Hydraulic tool clamping system • Weight: approx. 1,800 kg • Space requirement: approx. 2.3 x 2 x 2 m • Main drive motor: 4 kW • Total power consumption: approx. 7 kVA Features and Equipment: • Heidenhain TNC 124 CNC control • Hydraulic clamping for vertical and horizontal operations • Automatic central lubrication • Spindle brake • Technical documentation, spare parts lists, control manual, and programming examples • Full safety enclosure • Coolant system Dcjdpfx Ahsw Rx Tijgei • Electronic handwheel About the machine: For sale is a Kunzmann WF7/3 universal milling machine equipped with a Heidenhain TNC 124 CNC control. This universal milling machine is in outstanding condition. It comes from an automotive manufacturer where it was used only sparingly for training purposes. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal modes. Switching from vertical to horizontal operation is easy, achieved by simply swiveling the vertical head aside. The guideways are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected at our facility. Take the opportunity to view and test the Kunzmann under power at our location.

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Dcjdox S Edlopfx Ahgsi Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: used, Year of construction: 1995, x-travel 1200 mm y-travel 600 mm z-travel 600 mm table-size 1300 x 600 mm max. workpiece weight 2000 kg spindle taper ISO 50 spindle turning speed - stepless 30 - 3500 U/min feeds -stepless- 1 - 6000 mm/min rapid traverse 10 m/min power capacity - milling spindle 18 kW max. torque on the spindle 500 Nm distance work spindle /surface of the table 267 - 867 mm distance table-vertical head 58 - 658 mm voltage 380 V / 50 Hz control voltage 230 V total power requirement 22 kW weight of the machine ca. 6,5 t dimensions 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment • electr. handwheel, • vertical head manually tiltable, Dcsdpfxovw Duho Ahgsi • coolant device,

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 Dcjdpfx Ahevu E Nusgji The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2015020890, For sale is a magnetic filter system with integrated cleaning system. Filter systems of this type are usually made individually to order from customers. In this system, there is an exhibition purpose, which only served to show, and was hardly in use. product benefits Dcedpfecwghbjx Ahgoi Installation possible into existing production lines Separation of any ferrous metal contaminants Very corrosion resistant High wear resistance Compact design Low maintenance Technical details - 400 x 400 x 390 mm - Inlet 260x260mm - Inlet 260x260mm - 8 pcs magnetic filter rods