Milling machine

Kunzmann WF 610 MC

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3815-130-3235, Offer 25380 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling capacity in steel ST 60: 50 mm - Tapping capacity in steel ST 60: up to M 42 - Spindle taper: MK 4 - Spindle stroke: 200 mm - Spindle speeds steplessly adjustable: 40 – 1100 rpm Hfodpfsxr Ayhsx Ahnoi - Right and left-hand rotation - 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev - Throat depth: 350 mm - Max. distance spindle – table / baseplate: 790 / 1210 mm - Table with 2 T-slots: 630 x 540 mm - Table height adjustable via rack with hand crank - Drive: 400 V / 1.6 / 2.9 kW - Required floor space approx.: W 600 x H 2050 x D 980 mm - Weight approx.: 650 kg - Includes: - Tapping device - Quick-action drill chuck 1–13 mm - Emergency stop button - Work light - Coolant device

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel Hfedpfoyq Sv Dsx Ahnsi - Horizontal milling spindle - Coolant equipment

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet Hjdpfx Ajymznhehnefi >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Hodpfx Ahextbkuenofi Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Hjdpfx Aox N Ih Ijhnsfi Safety device at the drill Completely overhauled in 2026

Condition: used, turning diameter over bed 500 mm turning diameter over slide rest 320 mm turning length 1500 mm turning speeds 33 - 1500 U/min centre height 250 mm spindle bore 52 mm total power requirement 5,5 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m Hfjdpfxjzk Rd Es Ahnji

Condition: used, Year of construction: 2000, Kunzmann machining center BA 600 complete with Heidenhain control. Very good condition, however, there are occasional control issues. Hjdpfxsxn Av Us Ahnsfi

Condition: like new (used), Year of construction: 2021, New storage platform for sale Hedpsuph Avjfx Ahnefi - already dismantled and ready for loading - statics and construction drawings available - delivery by freight forwarder possible nationwide

Condition: excellent (used), Maximum distance between centers: 3,000 mm Maximum turning diameter: 720 mm Includes: 4-position tool holder Includes: 3 jaws for the chuck Includes: Faceplate Hsdpezhlhaofx Ahnsfi Includes: Steady rest Includes: Documentation

Condition: excellent (used), Year of construction: 1999, bore capacity in steel (diameter) 36.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm 4 speeds 120-900 / 240 - 1780 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 / 0.4 mm/U Hfedpfjy Agpqjx Ahnei total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm well-maintained condition (!!) current new price approx. 18.000 Euro special price on request Equipment: - robust pillar drill (V-belt) - electromagnetic feed clutch = spindle feed * with overload protection and electrical handle cross circuit - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German