Vertical machining center

KUNZMANN BA 1200

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Nsdpfxsznkpvj Ac Ijld Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 4,000 rpm, controller model: Heidenhain 407, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 420 mm Spindle speed max.: 4,000 rpm Tool holder: SK 40 Distance from spindle to table: 127–567 mm Spindle diameter in the front bearing: 55 mm Nlodpfezpxfhjx Ac Ijd MACHINE DETAILS Control system: Heidenhain 407 EQUIPMENT Handwheel Network connection

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 300 mm, table length: 450 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 400 mm Work table surface area: 300 x 450 mm Number of threaded holes: 2 x 6 Nlsdpezpwx Hofx Ac Ied

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 600 kg, swivel angle C-axis (max.): 360 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 600 mm Njdpfx Aszpxd Rec Iold Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Swivel range, B-axis: 360° MACHINE DETAILS Control system: Siemens Number of pallets: 2 Pallet size: 400 × 500 mm Permissible pallet load: 600 kg Machine weight: 10,500 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1119, travel distance X-axis: 1,100 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 8,000 rpm Rapid traverse rate, X/Y/Z-axis: 18 / 18 / 15 m/min Table area: 1,200 × 600 mm Nledpfezpw Egsx Ac Iod Workpiece weight, max.: 1,000 kg Spindle connection: ISO 40 Number of tool changer positions: 24 MACHINE DETAILS Control system: Siemens 840D SL ShopMill Coolant pressure through the spindle: 20 bar Connection power: 400 V, 50/60 Hz Current: 50 A Dimensions & Weight Footprint: approx. 3,000 × 2,350 mm Machine weight: approx. 8,000 kg EQUIPMENT ShopMill Preparation for 4th axis

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 211 S, No minimum price – guaranteed sale to the highest bidder! Nljdjzpximepfx Ac Ied TECHNICAL DETAILS Bar passage max.: 65 mm Diameter of front spindle bearing: 110 / 150 mm Collet clamping system: up to 60 mm HAINBUCH collet system: up to 65 mm Main spindle Spindle speed max.: 3,000 rpm Power of main spindle motor: 11 / 15 kW Main turret Number of tool positions: 8 Tool holder: VDI 30 Max. working stroke Z-axis: 50 mm Rapid traverse speed: 15 m/min Feed force: 6,790 N Additional sub-turret Number of tool positions: 8 Tool holder: VDI 20 Cross slide Number of horizontal slides: 2 Working stroke X1/X2 axis max.: 70 mm Working stroke Z1 axis max.: 230 mm Feed force X1/X2 axis: 8,000 N at 50 bar Vertical slide Number of vertical slides: 2 Working stroke X3/X4 axis max.: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force X1/X2 axis: 8,000 N at 50 bar MACHINE DETAILS Dimensions & Weight Machine height: 1,700 mm Footprint: 2,900 x 1,700 mm Machine weight: 4,100 kg

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, pivoting range: 45 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 400 mm Spindle speed range: 25 – 6,300 rpm Swivel range, vertical milling head: +45° Clamping surface, vertical: 300 x 450 mm Njdjzpwydepfx Ac Ijld Number of threaded holes: 2 x 6

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The spindle was replaced on November 14, 2018. TECHNICAL DETAILS Travel in the X-axis: 880 mm Travel in the Y-axis: 630 mm Travel in the Z-axis: 630 mm Spindle speed: 12,000 rpm Controlled B-axis: -15° to +90° Tool holder: SK 40 Number of tool magazine slots: 32 Nlodpszpw Iujfx Ac Ijd MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle operating hours: 50,033 h EQUIPMENT Coolant system

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller model: FANUC Series 160is-MB, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel ranges X-axis: 600 mm Y-axis: 410 mm Z-axis: 460 mm A-axis: -120 to +30° C-axis: 360° Spindle Speed range: 100 to 12,000 rpm Speed stages: stepless Spindle mount: 7/24 taper, size 40 Spindle bearing inner diameter: 65 mm Distances Distance from table surface to spindle nose: 70 to 530 mm Distance from column front to spindle center: 620 mm Table Work surface diameter: 350 mm Maximum workpiece weight: 200 kg Height of table surface above floor: 1,080 mm Feed rate Rapid traverse X- and Y-axis: 48 m/min Rapid traverse Z-axis: 36 m/min Nlodpfx Aozpxgrjc Iod Rapid traverse A-axis: 22.2 rpm Rapid traverse C-axis: 33.3 rpm Working feed rate X, Y, and Z-axis: 1 to 36,000 mm/min Working feed rate A-axis: 22.2 rpm Working feed rate C-axis: 33.3 rpm Tool changer Tool mount: JIS B 6339 BT40 Pull stud: MAS 403 P40T-1 Tool magazine: 20 tools Max. tool diameter: 110 mm Max. tool diameter with adjacent positions occupied: 82 mm Max. tool length from reference line: 300 mm Max. tool weight: 7 kg Tool change time, chip-to-chip: 1.2 s Tool change time, cut-to-cut: 3.8 s MACHINE DETAILS Control model: FANUC Series 160iS-MB

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 340 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! Njdpozpxglsfx Ac Ield TECHNICAL DETAILS Spindle speed range: 0 – 2,500 rpm Swinging diameter: 500 mm Diameter of rotation over bed: 570 mm Diameter of rotation over carriage: 340 mm Center height: 280 mm Distance between centers: 1,000 mm EQUIPMENT Accessories (see pictures)

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Z-axis: 300 mm, chuck outer diameter: 250 mm, spindle bore: 79 mm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Z-axis: 300 mm Chuck diameter: 250 mm Spindle head: 170 h5 Spindle diameter at the front bearing: 120 mm Spindle bore: 79 mm Number of tool stations: 12 Nlodpfszpxf Uex Ac Ijd EQUIPMENT C-axis

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, quill stroke: 80 mm, overall weight: 3,900 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 550 mm Vertical quill travel: 80 mm MACHINE DETAILS Machine weight: 3,900 kg Nljdpfx Acozpwxye Ijd EQUIPMENT Rotary table

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 142967, turning diameter over cross slide: 300 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 30 m/min, feed rate X-axis: 5 m/min, controller model: Mazatrol PC Fusion CNC 640T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Maximum turning diameter: 300 mm Maximum swing diameter: 525 mm Maximum swing diameter over slide: 350 mm Maximum bar diameter: 51 mm Main spindle Speed range: 35 – 4,000 rpm Drive power: 15 kW Maximum torque: 350 Nm Spindle nose: A2-6 Spindle bore: 61 mm C-axis positioning: 0–360° / 0.001° Tailstock spindle Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Maximum torque: 57 Nm Indexing: 72 positions / 5° Tool turret Number of tool positions: 12 Configuration: Stationary and driven tools Turret indexing time to station 1: approx. 0.2 s Driven tools Drive power: 3.7 kW Maximum torque: 35 Nm Speed range: 25–4,500 rpm Travel ranges X-axis travel: 190 mm Z-axis travel: 575 mm B-axis travel: 585 mm Rapid traverse rates X-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min B-axis rapid traverse: 18 m/min Feed ranges X/Z-axis feed: 0–5,000 mm/min C-axis feed: 1–2,000 rpm MACHINE DETAILS Control: Mazatrol PC Fusion CNC 640T EQUIPMENT Tailstock spindle Nodpfx Acezpxgxs Iold

Condition: ready for operation (used), Year of construction: 2007, operating hours: 65,176 h, functionality: fully functional, machine/vehicle number: 02260007541, turning length: 600 mm, turning diameter: 680 mm, spindle speed (max.): 5,000 rpm, controller model: Siemens 840 D, power: 25 kW (33.99 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 600 mm Turning diameter: 680 mm Maximum spindle speed: 5,000 rpm MACHINE DETAILS Control system: Siemens 840D Spindle power: 25 kW Spindle operating hours: 65,176 h Nledpfx Acezpxgfo Iod EQUIPMENT Chip conveyor Self-centering chuck: 250 mm diameter

Condition: ready for operation (used), operating hours: 46,652 h, functionality: fully functional, machine/vehicle number: 661227, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, power: 5.5 kW (7.48 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Nlodpjzpxfbefx Ac Isd Travel range Z-axis: 400 mm Spindle speed range: 40 – 4,000 rpm Spindle connection: ISO 40 Table surface area: 900 x 480 mm MACHINE DETAILS Spindle power: 5.5 kW Operating hours: 46,652 h Machine weight: 2,900 kg EQUIPMENT Digital position display Millplus CNC

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 350 kg, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Tool magazine slots: 24 Tool holder: SK 40 Rotary range, C-axis: 360° Table clamping surface: 600 x 1,000 mm Table diameter: 600 mm Maximum table load: 350 kg Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot spacing: 63 mm MACHINE DETAILS Number of axes: 5 (3+2) EQUIPMENT Nlodpfx Aezpxdwec Isd Controlled NC swivel milling head (B-axis) NC rotary table integrated in the fixed table (C-axis)