Industrial robot

KUKA KR 360-3

Condition: used, Year of construction: 2013, overall weight: 2,405 kg, load capacity: 360 kg, controller model: KRC4, Equipment: documentation/manual, Mechanics, control cabinet, operator panel, connecting cable Dkjdpfx Afjuvgqroneh

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. Dsdoirtdpjpfx Afnskh The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: reconditioned (used), Year of construction: 2005, machine/vehicle number: 3069 / BM5132, BM5132 Professional wrapper with stretch film Dkjdpfeqpgl Rox Afneh height adjustment Wrapping height approx. 2,500 mm Turntable diameter 1,600 mm max. load 1,600 kg Film roll width 500 mm Weight approx. 500 kg Supply voltage 400V - 50 Hz - 3 Ph

Condition: good (used), Robot Manfacturer: Staeubli Dedsbrhtdjpfx Afnjkh Type: RX170

Year of construction: 2025, condition: new, - soft start / stop - pre-stretch tension - additional engine - height 2.1 m - ramp / platform - platform diameter 1.65 m - film stretch up to 350% - Strong chain drive - man-hour and pallet counter - regulation of wrapping speed 3-12 rpm - the ability to adapt the device according to the customer's needs - 230V power supply - Automatic return to the starting position ADDITIONAL FEATURES: - Very easy to use - Operating hours counter Dsdpsmuzutjfx Afnjkh - Pallet counter - Cycle pause function - Stretching on the head modes and not on the palette - Adjustable wrapping speeds Pallet wrappers are designed for machine wrapping of goods stored on pallets with stretch foil. They are especially recommended where very high efficiency and low labor and financial costs in the packaging process are required, i.e. in distribution centers, warehouses, logistics centers, production plants, as well as in smaller companies. – increasing the efficiency of the packaging process – the ability to set the required parameters by machine and the high rotational speed of the wrapping plate makes machine wrapping much shorter than manual wrapping, and the employee during foiling can be involved in other activities, e.g. preparing or delivering another pallet, – repeatability of packaging – wrapping with a wrapper allows you to maintain an identical method of packaging for a specific type of cargo, repeatability of a once developed and appropriate method of packaging allows for safe storage and transport of goods, – load stability – the wrapper, thanks to the adjustment, allows you to adjust the wrapping method even to very diverse loads in a reliable way and guarantees the stability of the load on the pallet, which guarantees avoiding possible damage to the load.

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Dkodpfx Ajh Dwr Ujfneh Without cable and control cabinet. Addendum to the measurement report!

Condition: used, Working width: 230 mm Working height: 160 mm Spindle 1: Bottom / 7.5 kW Djdpjrmvhfsfx Afnekh Spindle 2: Right / 7.5 kW Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Spindle 5: Top / 15 kW Spindle diameter: 50 mm Number of spindles: 5 Weinig Hydromat 2000 planing and profiling machine for four-sided planing and profiling of timber with groove bed, without soundproof cabin.

Condition: good (used), Year of construction: 2003, Manufacturer: KUKA Type: KR 210 L 180 Dsdpoh Dw Dqsfx Afnjkh Year of manufacture: 2003 Maximum load capacity: 150 kg

Condition: excellent (used), Year of construction: 2015, Stravis sawmill line with Jabłoński automatic edger after complete renovation. Condition like new. The line consists of: 1. Log conveyor for 5m logs with a cascade feeder 2. Caterpillar-chain saw 110 + 90 kW 3. Multi-blade saw (2 x 75 kW) spindle diameter 80mm 4. Roller conveyor l- 6m with a mechanism for stopping the movement of the left prism 5. Crosscut saw from 0.8 m to 5m 6. Base conveyor 7. Roller conveyor l=3.5m 8. Driven roller conveyor 4.5m 9. Driven roller conveyor l=4.0 m with a board dumping mechanism 10. Transverse belt conveyor b=3m, l=5m 11. Transverse belt conveyor with a pick-up b=2m, l=5m 12. Longitudinal belt conveyor b=0.4m, l=5m 13. Automatic edger Jabłoński 14. Gooseneck Jabłoński 15. Cross feeder with a scanner measuring the width of the board Dedsv Iyhfepfx Afnekh 16. Centering for the edger 17 17. Edge separator 18. Crosscutter from 0.8 m to 3.0 m 19. Gooseneck 20. Automatic stacker Jabłoński 21. Non-regenerated crosscutter Jabłoński 22. Bruks chipper with control (you need to make a belt or vibrating gutter) Assembly and start-up at the customer's premises is possible. Possibility of sending videos of the working machine before renovation. Possibility of setting the line in a turn or along the length. Optionally, construction of a base for the line. OPPORTUNITY

Condition: like new (used), Year of construction: 2017, TRUMPF TruDisk 5001 (6C) * MFD 2017, as-new condition * laser power: 5 kW * wavelength: 1030 nm * beam quality: 4 mm mrad * beam switch for 4 fiber exits, min. fiber diameter: 100 µm * fiber connector: LLK-D * option: field bus interface & IIO3-card Dedpfxjqfguas Afnjkh * 2 identical lasers available