Krones Variojet/Volumetic flow meter (2001)

Krones Durchflussmesstechnik

Year of construction: 2021, condition: ready for operation (used), Operational hours counter: ca. 50h, with documentation and conveyor, without spare parts. Kwodpotr Eiuofx Ah Eeu

Condition: new, Year of construction: 2025, warranty duration: 12 months, total height: 2,050 mm, total width: 1,350 mm, total length: 1,400 mm, overall weight: 580 kg, film width: 360 mm, product height (min.): 60 mm, product height (max.): 450 mm, product width (max.): 170 mm, product width (min.): 60 mm, filling weight (min.): 10 g, filling weight (max.): 200 g, air demand: 360 m³/h, Equipment: documentation/manual, Make bags in the desired format, fill them with the product and seal them. Description - Optimum price-performance ratio - Simple operation and cleaning Kedpfx Ahoq Uld Ue Eowu - Low maintenance - Stainless steel design (1.4301) - Control system fully integrated into the packaging machine - Controlled by a PLC, color touch display - Fast, tool-free format changeover - One format included - Technical documentation from regional partners Technical data - Intermittent heat sealing for heat-sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 140-360mm - Bag dimensions (LxW): 40-250mm x 50-170mm - Number of cycles: 15-40 bags/min (depending on PU) - Accuracy: ± 0.5 - 1.5g - Weighing range: 3 - 200g - Electrical power: 3.7kW / 230V / 50Hz - Compressed air consumption: max. 360 l/min at 6 bar - Dimensions (LxWxH): 1400mm x 1320mm x 2050mm - Weight: 580kg

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Kjdpfx Aonmv Raeh Eewu

Condition: ready for operation (used), Year of construction: 2002, There are zwei identical vertical bag filling machines available, weight: 1.1t. Kwsdpfjnfvxzsx Ah Esu

Condition: reconditioned (used), Year of construction: 1999, JASA 350 S vertical packaging machine + Markem Imaje SmartDate 5 Thermal Transfer Printer The machine has been renovated, ready for operation, adapted to pack vegetables or fruit in a Raschel bag with attached front and rear foil. Equipment: Kedpfxopgkwcs Ah Ejwu - Sealing jaw with dies for handles in the package - Forming tube - Feed funnel - Markem Imaje SmartDate 5 thermal transfer printer Machine data: - Productivity: up to 60 pcs/min - Horizontal jaw width: 270mm - Vertical heater length: 450mm - Forming tube diameter: 170mm - Width of the main foil: 570mm - Width of additional foil: 120mm - Machine length: 2.6 m - Machine width: 1.4m - Machine height: 2.1m

Year of construction: 2025, condition: new, From linear to combination scales Kwsdpsq T R Sbofx Ah Esu Application: Dosing free-flowing products in accurate quantities. Features of the weigher - Simple operation - Quick and easy cleaning - Low maintenance requirements - Tool-free (dis)assembly of all format parts in contact with the product - Low maintenance effort - Stainless steel design (1.4301) - Control system fully integrated in the machine housing - Infinitely variable vibration system for optimum production flow - High accuracy due to combination Technical data - Number of weighing heads: 10 - Weighing container: 2.5l - Weighing range: 10 - 1000g / 2,500g - Accuracy: ±0.2-1.5g - Speed: 60 bags/min (depending on product) - Control panel: 7" touch screen display - Power: 1kW / 230V / 50Hz - Dimensions (LxWxH): 1620mm x 1100mm x 1110mm - Machine weight: 380kg

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system Kedpotndpzjfx Ah Eswu UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2018, operating hours: 200 h, condition: like new (used), functionality: fully functional, Very modern and flexible cartoner. Output max. 120 FS/min. Carton size [A x W x H] Kwedpfxst Iu H Sj Ah Eju min. 30 x 15 x 65 mm max.180 x 105 x 250 mm The machine can be adapted to your requirements if necessary

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) Kedpog Ey T Esfx Ah Eewu -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: reconditioned (used), functionality: fully functional, Continuous cartoner for blister packaging. Single-lane, infeed capacity with vacuum belt 400 BL/min. GuK stacking folder, output max. 250 FS/min. Kwedsr Ny H Hepfx Ah Eou