Form carrier, tool carrier, closing unit

KraussMaffei

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, opening stroke: 2,100 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Moving platen opening force: 89 kN Moving platen closing force: 92 kN Mounting platen (h x v): 1,600 x 1,550 mm Clear daylight (h x v): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Min./max. mold installation height: 500 / 1,100 mm Max. mold weight: 12,200 kg Gjdpsyv Acmjfx Acwsir Max. opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/back: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirements (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Pump motor rated power: 90 kW Installed heating power: 53 kW Barrel heating control zones: 7 Oil fill volume: 1,500 l Operating hours: 50,000 h EQUIPMENT Oscillating elements 1 x air valve Tie-bar pulling device 3 x hydraulic core pulls on moving side 2 x hydraulic core pulls on fixed side 20 x hot runner controllers Robot interface as per Euromap 67

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 158 h, arm reach: 1,300 mm, Hello, we are selling a demonstration robot UR10e, was used for a concept study but was discarded. Giedpfx Aep E T N Ascwjr

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: CX250-1000 Baujahr: 2010 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Giedpswcb Nrjfx Acwer Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Schnecken DN: 50 mm Max. Hubvolumen: 432 cm³ Spritzteilgewicht: 393 g/PS Steuerung: MC5 Ausstattung: Roboter, Krauss Maffei, Typ: LRX100S 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Krauss Maffei / Berstorff compounding extruder Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Gedpfxey At N Re Acwjir Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Water system pellet spin-dryer / centrifuge Control boards with Siemens Touch panel >> 12-month PLASTICO warranty OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.

Year of construction: 2018, condition: good (used), functionality: fully functional, machine/vehicle number: H3000TM, Universal testing machine H3000TM Made in Germany Crosshead stroke: 520 mm Working area depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm / min Return speed: 500 mm / min Travel resolution: 0.01 mm We have a very large selection of clamping fixtures - screw clamping fixtures - wedge clamping fixtures - pneumatic and hydraulic clamping fixtures. Pressure plates-bending fixtures-friction fixtures and much more. Strain gauges-extensometers-long displacement transducers-clamp-on transducers-clamping chambers. Force transducers optionally 50N-100N- 200N- 500N- 1000N- 2000N- or 3000N incl. Hess software Windows 8-9-10 or 11 for universal test sequences, simple tests even without a PC and a 5KN SP 56g screw clamp with pyramid or rubber jaws 30x50 mm Factory calibration certificate with DAkkS calibrated measuring equipment. In tension and compression direction in 10 steps. The universal testing machine of the H3000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a membrane keypad. The force and travel are shown on the 2-line LCD display. The testing machine can be used as a standalone unit or with a PC via a USB interface. The displacement is measured using an encoder with 0.01 mm visible resolution on the LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travel ranges, 500 mm or 1200 mm (with load cell without test tool). Gedot Rg H Aepfx Acwoir Additional scope of delivery: A load cell of your choice 50N-100N-200N-500N-1000N-2000N or 3000N, certificate 220 volt cable, USB cable, description, CE declaration of conformity. Load cell 3000N Measuring range:1-3000N tension and compression, with nom. 2mV/V Output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, reproducibility: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate

Condition: reconditioned (used), functionality: fully functional, Stock No.: 2858 1 used, partially overhauled and function-tested compounder pelletizing line, consisting of: Extruder Krauss Maffei / Berstorff Type ZE 60 A - 34 L/D Twin-Screw Co-rotating Extruder drive 160 kW AC Degassing with vacuum pump Laser separation head / melt filter Melt pump Eprotec Melt x10 ECON EUP 600 underwater pelletizer, complete with Start-up valve Water system Granulate drying centrifuge >> 1 year PLASTICO warranty Gsdpfx Acjy At Iajweir OPTIONAL at extra cost: Material conveying Gravimetric dosing systems Pellet classification Pellet filling station for BigBags or Octabins Further compounding plants, pelletizing systems, and gravimetric dosing units available ex works Wuppertal. Visit us or send us your inquiry.

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs Gedey Apdqopfx Acwoir \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Gijdjttbd Nopfx Acwer

Condition: excellent (used), Year of construction: 2008, clamping force: 1,200 kN, Injection moulding machine KraussMaffei KM 120-380 EX with automation, handling device and conveyor belt Godpfx Acsytpcmswjir

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs Giodey Aktmopfx Acwjr core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Year of manufacture: 2010 Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Engine speed: 2,945 1/min Condition: used (see pictures and type plate) Gisdpfet Iwyujx Acwor

Year of construction: 2010, operating hours: 51,200 h, condition: ready for operation (used), screw diameter: 80 mm, This Krauss Maffei CX 650-3000 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a screw diameter of 80 mm, 6 core pulls, and 6 pneumatic needle actuators. It includes an LRX 250 handling system with 4 vacuum and gripper circuits. Known defects include leaks and a non-regulating low-pressure pump. Contact us for more information about this machine. • Core pulls: 6 • Pneumatic needle actuators: 6 • Internal mold heaters: 12 • Cooling water circuits: 6 + 6 • Operating hours: approx. 51,200 h • Pump hours: approx. 61,500 h • Known defects: • Leaks at the upper operator-side frame • Leak at the injection unit • Low-pressure pump no longer regulates accurately Additional equipment • LRX 250 handling system • 4 vacuum circuits • 4 gripper circuits Gjdpfxsyffcas Acwoir

Year of construction: 2016, condition: as good as new (ex-display), Kategorie / Category: Doppelschneckenextruder / Twin-screw extruder Nummer / Number: DE27621 Hersteller / Manufacturer: KraussMaffei Berstorff Type: ZE 110 R x 28D UTmi Year of manufacture: 2016 like new, less than 100 operating hours Gijdpoiux Nmefx Acwor Screw diameter / Screw diameter: 2x Ø 127,0 mm L/D: 28:1 (extension of the processing unit possible / extention of processing unit possible) Antrieb / Motor: 250,0 kW (AC) - Wasser gekühl / water cooled Details: co-rotor, screw speed: max. 300 rpm, degassing, 2x Busch vacuum pumps MM 1202 A VA3, segmented screws and barrels, 1 x Berstorff ZSFE 120 side feeder - Control system: Siemens S7 with screen control The offer does not meet your expectations? Please visit our website Plama or send us your detailed inquiry, we have the right product for almost every budget.

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Giodpfx Acjra Nrxewjr Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Year of construction: 2013, operating hours: 42,681 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details. • Plasticising Size: 180 • Plasticising Arrangement: H • Screw Diameter: 28 mm • Nozzle Radius: 10 mm • Nozzle Bore: 4 mm • 3 units available Godpoym Uv Sefx Acwoir