Crane traverse 10 t

Korrmann TRV 10-5

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Tjdpfxjv Rwu Ue Ac Tob Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Year of construction: 2012, functionality: fully functional, Fully refurbished, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 -Parallel swing door for opening in the hot state -Slot in the oven collar, bottom right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Tjdpfsyn Emqex Ac Teb Oven, furnaces, industrial oven, muffle furnace, heat treatment oven, chamber furnace

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Tjdpfx Ajxuzyfjc Tjb Electrical power requirement: 15 kW Includes: - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation Tedpsvbk Rwjfx Ac Tsb - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm Tsdpfog S R Twsx Ac Tsb table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables. Tjdpfx Acjfzk Ews Teb

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, operating hours: 27,693 h, laser power: 3,000 W, Equipment: cooling unit, DG Tech – BLM Group Authorized Inspection Center In partnership with BLM Group, we manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high quality standards. We directly handle logistics, disassembly, and transportation, eliminating the risks associated with private sales. Tsdpfx Aor Iz Slsc Teb We provide dedicated software, technical training, and after-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. Thanks to our experience in after-sales service and our ongoing technical training, we offer a comprehensive and reliable service. LT COMBO FIBER Rear Automatic Loading 6500 – Unloading 6500 – Round tube min 16 mm max 225 mm – Square tube max 160x160 mm – Rectangular tube max 200x100 mm

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Todpfxerm Nqme Ac Tsb Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 8 - Number of turrets : 2 MAIN SPINDLE - Spindle power : 53 / 68 [kW] - Spindle speeds : 3000 [rpm] - Max. bar diameter : 102 [mm] - 1 - Saisie libre : 2000 [mm] - Max. chuck diameter : 420 [mm] - Rapid traverse rate : 30 [m/min] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle power : 50 / 70.5 [kW] - Spindle speeds : 3000 [rpm] - Max. bar diameter : 102 [mm] - Rapid traverse rate : 30 [m/min] - C axis indexing precision : 0,001 [°] UPPER LEFT TURRET - Number of positions : 12 - Number of motorized positions : 12 - Tool holder type : VDI 40 - X/Z stroke : 320 x 2.000 [mm] - Y stroke : 210 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 17 [kW] LOWER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - Tool holder type : VDI 40 - X/Z stroke : 210 x 2.000 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 11.3 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 137 [kW] WEIGHT & DIMENSIONS - Machine floor space : 9.000 x 3.500 [mm] - Machine height : 3.000 [mm] - Machine weight : 21.000 [kg] MACHINE HOURS - Number of working hours : 34274 [h] EQUIPMENT - CNC : INDEX C200-4D (Siemens 840D) - Coolant tank : KNOLL Tedpfx Acsuhbpfe Tsb * with high-pressure pump : 80 [bars] * with paper filtering unit - Automatic doors - Chips conveyor : Droite

Condition: used, functionality: fully functional, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Stroke adjustment from 10-140 mm Ram adjustment 80 mm Stroke rate 50 /min. Tjdsv T Dapepfx Ac Tob