Steam tunnel

Koppens ST14000/600

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data - Capacity: 20 HL/hour - Application: Beer - Configuration: Automated, HMI-controlled Dodpoyk Ab Djfx Aa Ijwc  

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 103, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, type plate available, FOOD STERILIZATION DEVICE EQUIPPED WITH FLOW METER, HEAT EXCHANGER, AND CHAIN CONVEYOR FOR BASKETS Dwjdpsw Ekkdjfx Aa Isc

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Dedomnkhfspfx Aa Iewc

Condition: used, Year of construction: 2017, Overview Dwedpfx Aezcu Slsa Isc This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) - Product types: Beer and other carbonated drinks - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system

Condition: ready for operation (used), functionality: fully functional, The Lagarde SVS100 autoclave is designed for industrial facilities requiring controlled thermal processing of packaged products. It ensures consistent and reproducible sterilization cycles, thereby contributing to the sanitary safety of production lines. As a result, processing remains controlled throughout the operation. Additionally, the Sterinov design meets the stringent requirements of food processing environments. This autoclave can be integrated into production lines dedicated to canned foods, ready meals, and packaged products. Its 400 V electric operation facilitates installation in standard industrial facilities. Furthermore, the robust construction of the equipment allows for repeated use under demanding production conditions, providing a reliable solution suited to industrial requirements. Dwedpfxoyguaqe Aa Isc The SVS 100 is engineered with an architecture that guarantees stable thermal cycles, keeping operating parameters constant during processing phases. The simple electrical setup also makes maintenance and daily operation easier, supporting secure, uninterrupted production without unnecessarily complicating the process. Offered as a used unit by Europ’Équipement, the Lagarde Sterinov SVS 100 autoclave is identified by its manufacturer's data plate and undergoes inspection before being put back into service. This ensures users have a traceable, immediately operable unit. Acquiring a reconditioned autoclave also helps reduce capital investment while maintaining a tool suited to industrial sterilization requirements, making this model a cost-effective solution that ensures reliable thermal processing. Technical specifications: Model: SVS 100 Type: industrial sterilization autoclave Power supply: 400 V Frequency: 50 Hz Maximum operating current: 12 A Wiring diagram number: 6000.A Marking: Sterinov manufacturer's plate

Condition: like new (used), Static Autoclave BARRIQUAND STERIFLOW 6 Baskets – Stainless Steel Static autoclave BARRIQUAND STERIFLOW with a capacity for 6 baskets, designed for the sterilization and thermal treatment of packaged food products in industrial processes. Manufactured by BARRIQUAND STERIFLOW, a specialist in thermal treatment systems, this autoclave is designed to operate using controlled cycles of heating, sterilization, and cooling, guaranteeing reproducible process conditions. Its industrial construction in stainless steel, together with the automatic control system, allows it to be integrated into canning plants and production lines that require pasteurization or thermal sterilization processes. Dwedpfx Aaezbmvmj Isc MAIN FEATURES Manufacturer: BARRIQUAND STERIFLOW Type: Industrial static autoclave Capacity: 6 baskets Application: Sterilization / thermal treatment Batch process Horizontal chamber Stainless steel construction Large-diameter front door Mechanical safety locking system Automatic cycle control Control panel with Siemens HMI Control of the different process parameters Integrated piping and valve system Designed for industrial operation Suitable for integration into sterilization lines PROCESS The BARRIQUAND STERIFLOW 6J is designed to perform controlled thermal treatments of previously packaged products. The baskets with product are placed into the autoclave chamber, and once closed, the programmed cycle is automatically executed, controlling the different phases of heating, thermal holding, and cooling. The system allows processing different types of packages and products according to the recipe, sterilization parameters, and installed configuration. It can be integrated with: Basket loading and unloading systems Basket conveyors Automatic loaders and unloaders Process water preparation systems Automatic sterilization lines Handling and palletizing systems APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, pet food, and other food processing plants that need to sterilize or pasteurize packaged products. Depending on the configuration and process, it can be used with cans, jars, trays, pouch bags, and other packaging suitable for thermal treatment in an autoclave. The combination of BARRIQUAND STERIFLOW technology, a capacity for 6 baskets, and automatic process control provides a robust solution for industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2018, Overview This complete can filling line was manufactured by COMAC and is designed for the filling of carbonated beer in aluminium cans. The line has a nominal output of 5,500 cans/hour for 44 cl cans and 6,000 cans/hour for 33 cl cans. The core machine is a COMAC ISO 14-2 filling and seaming monoblock with 14 electro-pneumatic isobaric filling valves and 2 seaming heads. The filling monoblock includes CO₂ flushing before filling, product tank pressure control, “no can – no fill” function, automatic height adjustment for different can sizes and CIP dummy cans suitable for acid and caustic cleaning up to 80°C. The self-adhesive labeller handles a maximum label length of 210 mm and a maximum label height of 80 / 160 mm at up to 6,500 cans/hour. The dry rinsing system uses approx. 0.25 Nl of ionized air per can, with a treatment time of approx. 3 seconds. Technical data - Line type: Complete can filling line - Manufacturer: COMAC - Year of manufacture: 2018 - Product: Carbonated beer - Nominal output: 6,000 cans/hour (33 cl); 5,500 cans/hour (44 cl) - Filling temperature: 2–4°C - CO₂ content: max. 5.5 g/L - Container type: Two-piece cans with SOT Dodpszktw Uefx Aa Iewc - Can formats: 330 ml and 440 ml - Can diameter: 66 mm - Can end: 202 - Product pressure: 3–4 bar - Water pressure: 3–4 bar - Air pressure: 6 bar - CO₂ pressure: 6–8 bar - Electrical supply: 3x400 V + N + T, 50/60 Hz - Auxiliary voltage: 24 V Scope of Delivery - Can Depalletizer | COMAC | For pallet size 1,120 x 1,300 mm; incl. empty can buffer table and platform | 2018 - Dual Channel Can Rinser | COMAC | Ionized Air Rinser | HEPA filtration, ionized air cleaning, 2-channel design | 2018 - Self-Adhesive Labeller | COMAC | Wrap-around labelling for empty cans; 6-plate carousel | 2018 - Filling / Seaming Monoblock | COMAC | ISO 14-2 | 14 isobaric filling valves / 2 seaming heads | 2019 - Double Shower | COMAC | Washing device after level control | 2018 - Beer Pump | COMAC | Centrifugal beer pump with frequency converter and pressure control | 2018 - Level / Lid Inspection | FT System | HS600-ST+CL003-RX+CT001-SE+ZT | X-ray level control / inspection system | 2019 - Can Twister 1 | COMAC | 180° can inversion before coding | 2018 - Can Dryer | BRB Globus | MEGA ADE 611 CW | 2019 - Ink Jet Coder | COMAC | Continuous inkjet coder, up to 162.5 m/min | 2018 - Can Twister 2 | COMAC | Return cans to upright position | 2018 - Carton closing system | SOCO System | T-10 | 2012 - Can / Case Conveyor System | COMAC | Conveyor system according to layout | 2018 - Conveyor Canopy | COMAC | Stainless steel canopy above empty can conveyors | 2018 - Change Parts | COMAC | – | Format parts for 33 cl cans and 44 cl cans incl. spouts, twisters and labeller parts | 2018 - Technical Documentation | COMAC | Documentation in English, paper copy and CD-ROM | 2018 Condition Used line – built in 2018, currently still installed. The line can be viewed on request. Availability Immediately available. Location: United Kingdom.

Condition: used, The Treif Puma CE-F is a professional industrial meat slicing machine designed for high-volume meat processing operations. With a cutting performance of up to 400 cuts per minute, it delivers fast, accurate, and consistent portioning of various meat products. The machine is suitable for processing fresh, chilled, and slightly frozen products down to -4°C. Its robust construction and powerful drive system ensure reliable operation, high productivity, and excellent cutting precision. Technical Specifications: Manufacturer: Treif Model: Puma CE-F Type: Industrial Meat Slicer Cutting Capacity: Up to 400 cuts per minute Product Temperature: Down to -4°C Power Supply: 230/400 V, 50 Hz, 3 Phase Power Rating: 3.4 kW Current Consumption: 16 A Dwsdpfjzd E Swex Aa Ijc Chamber Dimensions: 235 x 220 mm Machine Dimensions: 1870 x 880 x 1450 mm Weight: 285 kg Application: Slicing and portioning meat, steaks, chops, pork belly, and other food product

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed Dwjdpfx Ajzxnu Dea Iec - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, We offer a used brine mixing system from Schröder Maschinenbau GmbH designed for preparing brines used in meat processing and food production. The system is designed for fast and efficient mixing of brines, including those with high levels of dry solids such as salt, phosphates, spices, processing aids, and functional ingredients. The system consists of two tanks—a preparation tank and a storage tank. This configuration allows for the simultaneous preparation of a new batch of brine and the storage of the finished mixture for further processing. The system is equipped with two high-performance pumps, analog control of the brine preparation process, and a cooling system that helps maintain the proper temperature of the mixture. Schröder brine mixer units enable the rapid production of a homogeneous brine, which is crucial for subsequent production stages such as injection, massaging, curing, and marinating. Properly prepared brine ensures the uniformity of the production process, production consistency, and the quality of the final product. The system can be used in meat processing plants, poultry processing plants, and facilities producing cold cuts, hams, cured products, marinated products, and other items requiring brine preparation prior to injection or massaging. Schröder Maschinenbau GmbH – a brine mixing system with 2 tanks, consisting of: brine preparation tank finished brine storage tank two high-capacity pumps brine mixing and circulation system analog process control panel brine cooling system piping and process valves stainless steel structure connections to the downstream process Technical Specifications: Manufacturer: Schröder Maschinenbau GmbH Equipment Type: brine mixing system Year of Manufacture: 2001 Number of Tanks: 2 Tank Types: preparation and storage Number of Pumps: 2 Control: analog Cooling System: yes Power Supply: 400 V Frequency: 50 Hz Power: 4 kW Dwsdpfx Ajzhwkmea Ioc Rated current: 9 A Compressed air: 8 bar Length: 2400 mm Width: 1400 mm Height: 2400 mm Key advantages: rapid preparation of homogeneous brine capability to process large amounts of dry matter two tanks—a preparation tank and a storage tank two high-performance pumps brine cooling system analog process control Stable preparation of brine for injection and massaging Improved repeatability of the production process Positive impact on the quality of the final product Stainless steel construction Renowned manufacturer Schröder Maschinenbau GmbH