Kohem (now CIMEC) RIS 8/1 - DPS Kosme - GyM- SMI (2014)

Kohem (now CIMEC) Kosme - GyM- SMI

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data - Capacity: 20 HL/hour Lsdpfsyk Ab Dex Ac Aohl - Application: Beer - Configuration: Automated, HMI-controlled  

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Lodpfx Acsztpxmj Aehl

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: - Capacity: 6,700 bph - Cell Pitch: 102 mm - Bottles per row: 10 - Dimensions + Weights: Ljdpfswg E D Ijx Ac Ajhl Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - YOM 1999 - Formats: - 0,33l - 0,5l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  - Year of Manufacture: 2010–2014 - Application: Water and other beverages - Capacity: - Approx. 2,000 bph (330 ml) - Approx. 1,670 bph (500 ml) Lhedpjyb Tkdjfx Ac Aol - Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) - Closure Type: 26 mm crown caps - Configuration (Monobloc): - 16 rinsing heads - 16 filling heads - 1 crowning head Scope of Delivery  - Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph - Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph - Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts - DE filter | Spadoni | - | 2011 | 80 hl/h - Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules  

Condition: used, Year of construction: 2018, Overview This complete can filling line was manufactured by COMAC and is designed for the filling of carbonated beer in aluminium cans. The line has a nominal output of 5,500 cans/hour for 44 cl cans and 6,000 cans/hour for 33 cl cans. The core machine is a COMAC ISO 14-2 filling and seaming monoblock with 14 electro-pneumatic isobaric filling valves and 2 seaming heads. The filling monoblock includes CO₂ flushing before filling, product tank pressure control, “no can – no fill” function, automatic height adjustment for different can sizes and CIP dummy cans suitable for acid and caustic cleaning up to 80°C. The self-adhesive labeller handles a maximum label length of 210 mm and a maximum label height of 80 / 160 mm at up to 6,500 cans/hour. The dry rinsing system uses approx. 0.25 Nl of ionized air per can, with a treatment time of approx. 3 seconds. Technical data - Line type: Complete can filling line - Manufacturer: COMAC - Year of manufacture: 2018 - Product: Carbonated beer - Nominal output: 6,000 cans/hour (33 cl); 5,500 cans/hour (44 cl) - Filling temperature: 2–4°C - CO₂ content: max. 5.5 g/L - Container type: Two-piece cans with SOT - Can formats: 330 ml and 440 ml - Can diameter: 66 mm - Can end: 202 - Product pressure: 3–4 bar - Water pressure: 3–4 bar - Air pressure: 6 bar - CO₂ pressure: 6–8 bar - Electrical supply: 3x400 V + N + T, 50/60 Hz - Auxiliary voltage: 24 V Scope of Delivery - Can Depalletizer | COMAC | For pallet size 1,120 x 1,300 mm; incl. empty can buffer table and platform | 2018 - Dual Channel Can Rinser | COMAC | Ionized Air Rinser | HEPA filtration, ionized air cleaning, 2-channel design | 2018 - Self-Adhesive Labeller | COMAC | Wrap-around labelling for empty cans; 6-plate carousel | 2018 - Filling / Seaming Monoblock | COMAC | ISO 14-2 | 14 isobaric filling valves / 2 seaming heads | 2019 - Double Shower | COMAC | Washing device after level control | 2018 - Beer Pump | COMAC | Centrifugal beer pump with frequency converter and pressure control | 2018 - Level / Lid Inspection | FT System | HS600-ST+CL003-RX+CT001-SE+ZT | X-ray level control / inspection system | 2019 - Can Twister 1 | COMAC | 180° can inversion before coding | 2018 - Can Dryer | BRB Globus | MEGA ADE 611 CW | 2019 - Ink Jet Coder | COMAC | Continuous inkjet coder, up to 162.5 m/min | 2018 - Can Twister 2 | COMAC | Return cans to upright position | 2018 - Carton closing system | SOCO System | T-10 | 2012 Lsdpfxszktw Ue Ac Aohl - Can / Case Conveyor System | COMAC | Conveyor system according to layout | 2018 - Conveyor Canopy | COMAC | Stainless steel canopy above empty can conveyors | 2018 - Change Parts | COMAC | – | Format parts for 33 cl cans and 44 cl cans incl. spouts, twisters and labeller parts | 2018 - Technical Documentation | COMAC | Documentation in English, paper copy and CD-ROM | 2018 Condition Used line – built in 2018, currently still installed. The line can be viewed on request. Availability Immediately available. Location: United Kingdom.

Condition: ready for operation (used), Diameter range: 52 mm – 65 mm Height range: Production capacity: up to 3000 c.p.h. Ledpfx Acjyv An Aj Ajhl No. of heads: 18 Tooling for approx. 52 mm (202) Filler and seamer available separately or together

Condition: used, Year of construction: 2022, Overview  This dual isobaric counter-pressure filling line for bottles and cans was manufactured in 2022 by the Spanish company González Tratamiento. The system includes a Firulais 6 Latas-Botellas filler and MPC-AS self-adhesive labeller, offering a compact and flexible solution for small and medium-sized breweries or beverage producers. The filler is still in operation and was maintained regularly. The owner is selling it because the equipment exceeds their current production capacity. Technical data  - Capacity: Up to 2,000 bph (operated between 500–1,000 bph) - Filling System: Isobaric, counter-pressure - Filling Valves: 5 - Bottle Formats: 0.33 L and 0.75 L (adjustable) Ledpfx Acoxn Uf Ie Aohl - Can Formats: Standard 0.33 L - Closure Systems: Integrated can seamer and crown capper - Construction: Stainless steel - Working Pressure: up to 3 bar - CO₂ System: Pre-evacuation for cans, vacuum for bottles - Controls: Touchscreen with adjustable parameters - Mobility: On wheels with adjustable legs - Condition: In use, regularly maintained Scope of Delivery  - Filler | González Tratamiento | Firulais 6 Latas-Botellas | 2022 | 5-valve isobaric filler with integrated can seamer and crown corker - Labeling machine | González Tratamiento | MPC-AS | 2022 | Self-adhesive labeler, wrap-around, for various bottle sizes, incl. thermal printer for compliance and expiry date marking  

Condition: used, Year of construction: 2006, Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph Introduction to the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph offers a compact and high-performance solution for bottling still wine. Bertolaso, a renowned manufacturer, built this specific model, the Miniblock Olimpia 12/12/1, in 2012. Consequently, the machine combines rinsing, filling, and capping functions into a single, efficient structure. Operating performance of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph processes 2500 bottles per hour and operates in a clockwise direction. Moreover, the system includes complete safety protections that comply with current industrial machinery standards. It also comes with technical manuals and full revision documentation. Therefore, operators can manage installation and maintenance activities efficiently. Operational status and production applications Lhjdox H Rn Ejpfx Ac Ael The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph currently runs in production and bottles still wine. Specifically, its rinsing unit uses 12 grippers and performs a single treatment cycle to clean containers internally before filling. Consequently, it ensures high hygiene standards. In addition, the modular construction allows easy adaptation to different production requirements. Technical specifications of the filler The filling section of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph features 12 valves. Particularly, the system fills containers using a light vacuum method, which preserves the wine’s organoleptic properties. Furthermore, the use of fixed valves ensures reliable performance and simplifies maintenance procedures. Thus, the machine minimizes downtime during cleaning or part replacement. Capping system of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The capping unit of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph applies flush corks using a single capping head. As a result, it maintains consistent sealing quality across all bottles. It handles corks with a 26-millimeter diameter, maintaining compatibility with common industry standards. Similarly, the PLC-based control system by Siemens ensures high automation precision. In fact, it guarantees seamless operation even during extended production shifts. Therefore, companies can integrate the monoblock into automated bottling lines without requiring major modifications. Dimensions and configuration of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph has only 4000 operating hours and remains in excellent working condition. Hence, it represents a very reliable choice for businesses requiring immediate production integration. It measures 4000 millimeters in length, 2450 millimeters in height, and 1850 millimeters in width, fitting easily into compact production areas.

Condition: used, Year of construction: 1985, 2 horizontal stainless steel pressure tanks, each equipped with outlet pipe, pressure gauge and sight glasses. The tanks come with a saddle frame for installation. Additional title: horizontal stainless steel tanks mounted on scaffolding Volume: 1050 l Max. overpressure: 3 bar Length: 2200 mm Width: 800 mm Height: 800 mm Material: stainless steel Lsdpfxexykw Dj Ac Ajhl Position: horizontal Base construction: with scaffolding for installing the tanks one above the other Features: outlet pipe, pressure gauge, sight glasses

Condition: used, Year of construction: 2003, A system for blending beer with degassed water and subsequent carbonation. Additional title: Carboblender for precise mixing and carbonation Ljdpfezizthex Ac Ashl Capacity: 20000 l/h Material: contact surfaces from stainless steel Position: mounted on stainless steel frame Features: various pipes, valves and sensors; control cabinet with touch panel