KNUTH X-Mill 640

KNUTH X-Mill 640

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,300 mm, total width: 1,800 mm, table width: 750 mm, table length: 360 mm, table load: 300 kg, overall weight: 2,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, positioning accuracy: 0.01 mm, product length (max.): 2,300 mm, number of axes: 3, This 3-axis KNUTH X.mill 640 CNC was manufactured in 2009. It features a total power of 16.4 kW and operates at 400 Volt with a frequency of 50 Hz across 3 phases. The machine is equipped with a new frequency inverter and a new braking resistor. If you are looking to get high-quality machining capabilities, consider the KNUTH X.mill 640 CNC vertical machining centre we have for sale. Contact us for further details. - Total Connected Power: 16.4 kW- Voltage: 400 V- Frequency / Phases: 50 Hz / 3 Phases- Distance Spindle Nose to Table Surface: 50 – 550 mm- Table Dimensions: 750 × 360 mm- Max. Table Load Capacity: 300 kg- Table Height Above Floor: 850 mm- T-Slots: 3 pieces × 18 mm × 100 mm spacing- Spindle Speed: 60 – 8,000 rpm (model-dependent up to 10,000 rpm)- Spindle Taper: SK40 / BT40- Spindle Motor Power: approx. 7.5 kW to 11 kW (peak power up to 16.4 kW)- Rapid Traverse (X / Y / Z Axis): 15,000 mm/min (GP model up to 30,000 mm/min)- Working Feed Rate: 5 – 5,000 mm/min- Positioning Accuracy: ± 0.01 mm- Repeatability: 0.005 mm- Automatic Tool Changer (ATC) Type & Capacity: Drum-type or double-arm changer with 12, 16, or 18 stations (drum carousel visible)- Max. Tool Dimensions: Ø 78 mm × length 250 mm- Optional Clamping Equipment / Accessories: Dual machine vices mounted on the table; tool holders loaded in ATC carousel- Frequency Inverter: New- Braking Resistor: New- Manufacturer Error Description: Main spindle motor feels loose or offers resistance when turned manually (possible issue with belt, pulley, or top spindle mechanism). Main spindle motor encoder may require repair (sends positive signals only, negative signals required for proper positioning). Technical Specification Dodpfx Aoz Ep N Hjcyswd Taper Size SK 40

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) with thread cutting function Dwodpfxex Uw S Ho Acyjd

Condition: good (used), Year of construction: 2019, functionality: fully functional, X.mill M640 Eco machining center with Si 808D Advanced TTL Table dimensions 750 x 360 mm Dwedpfx Acjz Iw Najysd Table load capacity 500 kg T-slots (number x width x spacing) 3 x 18 x 100 mm Distance from spindle nose to table 80 - 580 mm Travel ranges X / Y / Z: 640 / 400 / 500 mm Main spindle spindle speed 10,000 rpm Main spindle spindle overhang 430 mm Main spindle spindle taper BT 40 Rapid traverse X / Y / Z 36,000 / 36,000 / 24,000 mm/min Feed rate Working feed rate X / Y / Z 10 - 12,000 mm/min each Number of tool positions 12 Tool diameter 55 (101) mm Tool length (max.) 200 mm Tool weight (max.) 8 kg Tool change time chip to chip 9 s Tool change time tool to tool 7 s Positioning accuracy ± 0.01 mm Repeatability accuracy ± 0.005 mm Main drive 11 kW Main drive, constant load 7.5 kW Dimensions (L x W x H) approx. 2.3 x 1.8 x 2.3 m Weight 4,200 kg The machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis KNUTH XMILL 640 was manufactured in 2015. It features a Siemens 828 control, a spindle speed of 8,000 rpm, and a BT40 spindle taper. The table size is 750 × 360 mm, and it includes an 18-tool changer. If you are looking to get high-quality milling capabilities, consider the KNUTH XMILL 640 machine we have for sale. Contact us for more information. Dwedpfjzvu U Eox Acyjd • Rotary axes: No • Tool changer: 18 tools • Table size: 750 × 360 mm • Optical scales: No • Other options: 20 bar through-spindle coolant Technical Specification Taper Size BT 40

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm Djdpfxjzguums Acyowd With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1998, grinding length 2000 mm grinding width 600 mm total power requirement 17 kW Dodpfxsv S Ip Ee Acyowd weight of the machine ca. 10 t

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, spindle bore: 84 mm, turning diameter: 1,000 mm, turning length: 5,000 mm, quill stroke: 300 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, swing diameter over cross slide: 600 mm, faceplate diameter: 1,000 mm, The lathe is in excellent condition, under power. It is equipped with steady rest. Manufactured by Ryazan (Russia) Work piece diameter, mm 1000 Dodpfx Acoxwuw Neyowd Work piece length, mm 5000 Spindle rotation speed, rpm 5 – 500 Spindle bore diameter, mm 84 Metric threading, mm 1 – 120 Inch threading, thread/inch 28 – 1/4 Module threading, module 0,5 – 30 Quill taper Morse 5 Quill movement, mm 300 Motor capacity, kW 22 Machine weight, kg 15750 Machine dimensions, mm 6140 x 2200 x 1760

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Dedpfezz Afisx Acyjwd Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: good (used), Year of construction: 1974, Type / model: 16K20 Control: conventional Center distance: 750 mm Passage: 55 mm Center height: 220 mm Turning diameter over bed: 440 mm Speed range: 12 to 1,600 rpm Feed: Connection: 10 kW Accessories/equipment: Dsdpfx Acevug Dtoyewd Condition: good Weight: approx. 2.4 t Dimensions: 2,600 x 1,200 x 1,700 mm

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 4500 mm 2 tool posts included with the machine Weight approx. 22 tons Dwsdov Hx R Nepfx Acysd Video of the machine in operation available!