Conventional Horizontal Lathe - Basic Plus

Knuth Basic Plus

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Cedpfx Abeqwgzqoboaa Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: Caedpfx Ashhm Edsbbja - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: ready for operation (used), Year of construction: 1970, LZ-Lathe KERN Type:DS 20 AL Year 1970 with 3 jaws lathe chuck Forkardt 250mm, tool quick winder holder Cjdegqxciepfx Abbjaa Multifix size C with holders coolant device. turning diameter overbed:500mm turning diameter overplane : 250mm centre distance : 1000mm spindle speed: 12 -1200U/min Machine can be demonstrated under current Good guides .

Condition: new, Year of construction: 2025, Holzkraft band saw HBS 533 S. Heavy professional design with high dead weight for maximum running smoothness especially smooth and precise running thanks to torsion-free machine housing large dimensioned cast iron saw table in one piece, tiltable from 0° to +20° with ground and polished surface patented table tilting device with hand wheel and toothed rack saw band quick clamping ceramic saw band roller guide large cast iron parallel fence fast and precise cutting height adjustment via handwheel and toothed rack with millimetre scale safety switch for automatic shut-off when opening the door large cast iron parallel fence standard with angle stop flywheels made of grey cast iron with special coating on the running surfaces Inspection window for checking the saw blade running Professional saw table guide the heavy, massive saw table made of grey table is easily and comfortably adjusted by a handwheel rack and pinion guide system the inclination is steplessly adjustable from 0° to +20°. Patented working table dimensions 750 x 530 mm cutting speed 1400 m/min. flywheel Ø 530 mm max. cutting height 350 mm max. cutting width with fence 465 mm max. cutting width without fence 510 mm band saw blade length 4190 mm precision guide top / bottom saw table inclination 0° - +45° motor power 400 V/50 Hz/P2 4,0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Casdpfjb S Uzksx Abbea Suction port diameter 2 x 100 mm Location: ex stock Bitburg

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Casdpod Spf Rjfx Abboa Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: new, Year of construction: 2025, TYTAN 750 VARIO Metal Lathe (230V) with Variable Spindle Speed Control Cedpsw H Raujfx Abboaa The TYTAN 750 VARIO is a versatile metal lathe designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking, and reaming. With a working range of 250 x 750 mm and a DC motor (1.1 kW / 230V), it is ideally suited for small industrial workshops, repair shops, and home garages. Key Features Modern DC motor with stepless spindle speed control offers ease of use and minimizes setup time. LCD display shows real-time spindle speed, enabling precise adjustments during cutting and threading. Two spindle speed ranges: Low: 50–1125 RPM – for machining hard steels High: 100–2250 RPM – for high-speed precision turning Thread cutting capabilities: Metric threads – 18 types (0.2–3.5 mm) Imperial threads – 21 types (8–56 TPI) Capable of cutting both right- and left-hand threads Automatic longitudinal feed – 6 speed settings (0.07–0.40 mm/rev) significantly reduce machining time while maintaining accuracy during long part turning. Fully compliant with EU directives (CE) and DIN standards for safety and quality. Technical Specifications Parameter Value 3-jaw chuck 125 mm Max. turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Distance between centers 750 mm Max. part length (chuck to center) 700 mm Bed width 135 mm Tool post size 65 x 65 x 20 mm Max. tool size 12 x 12 mm Spindle bore 30 mm Spindle taper MT4 Spindle speed control Stepless (L/H range) Spindle speed range (L/H) 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 settings (0.07–0.4 mm/rev) Compound slide travel 70 mm Longitudinal slide travel 650 mm Cross slide travel 135 mm Tailstock quill diameter 30 mm Tailstock quill travel 60 mm Tailstock taper MT2 Motor power (S1/S6) 1.1 / 1.32 kW / 230 V Dimensions (L/W/H without stand) 1310 x 610 x 490 mm Dimensions (L/W/H with stand) 1350 x 560 x 1250 mm Weight (without stand) 165 kg Weight (with stand) 180 kg Standard Equipment 3-jaw chuck (125 mm) Fixed and traveling steady rests Change gears set Fixed center MT2 Fixed center MT4 Reversible chuck jaws (1 set) Grease gun Chip tray Chuck key and tool post wrench Service tool kit CE-compliant safety guards

Condition: new, The V-Turn 410/1500, part of the Conventional Horizontal Lathes category and under the Engine Lathes group, is a precision lathe designed for both precision machining and robust production tasks. This bestselling model from KNUTH features an inverter and a powerful 5.5 kW motor, offering spindle speeds up to 3,000 1/min, making it highly effective for processing workpieces with small diameters while maintaining exceptional quality. The constant cutting speed function during face turning automatically adjusts spindle speed based on the diameter, ensuring turning results that rival those of CNC machines. Built with a heavy ribbed machine bed and a solid cast-iron frame, the V-Turn 410/1500 provides stability and strength for heavier machining applications. Additional features include a micrometer stop, turret stop, and integrated central lubrication for low maintenance. With extensive standard equipment, this machine is ready for various turning operations. To enhance your productivity with a top-notch Engine Lathe, order online today or request a quote. Csdpfx Asuxddcebbeaa

Condition: new, Year of construction: 2025, The ERBA EVP-RA 550 vibratory finishing machine features a rising work bowl floor with integrated separation. It is equipped with an easily interchangeable screening unit and is distinguished by high operational efficiency thanks to the integrated drop stage. Discharge and separation are performed via the integrated flap (manual/pneumatic operation). Upon request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted via a frequency converter (optional). Thanks to its lateral discharge, the EVP-RA 550 can be linked with other machines. The system can optionally be equipped with fully automatic PLC control. ERBA vibratory finishing systems are known for their durability and longevity, which are largely attributed to the hot-poured polyurethane lining of the work bowl. Technical data: - Gross volume: 550 l - Working channel width: 390 mm - Unbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal bowl diameter: 1,400 mm Prices listed are net plus the currently applicable statutory VAT and shipping costs. Some images may show the machine with optional accessories that are available at extra cost. If you are interested, we look forward to hearing from you. We are happy to provide you with free and non-binding advice. The European Commission provides an online dispute resolution (ODR) platform for out-of-court settlements. This offer is for online presentation purposes only. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, together with our general terms and conditions, imprint, and the right of withdrawal, before a purchase/contract is concluded. Cedon Ut Uvopfx Abbjaa

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Caedpfxjv Ifxio Abbea Spindle drive 1.5 KW, Multifix tool holder, 24 longitudinal feeds, Metric thread, Inch thread,

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Caedpfjd I A Dhox Abbsa Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm