Knee-and-Column Milling Machine

KLOPP FK 10 / TNC135

Condition: used, Gearbox, bevel gear, worm gear Fpedpet Snw Sjfx Ag Isl -Gearbox: Worm gear ratio: i = 7.5 -Shafts: Ø 14 x 34 mm / see photos -Dimensions: 122/105/H140 mm -Weight: 4.2 kg

Condition: new, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 120 mm, total height: 1,820 mm, total width: 1,780 mm, total length: 1,400 mm, table width: 500 mm, table length: 900 mm, workpiece weight (max.): 190 kg, distance table to spindle center: 390 mm, Equipment: documentation/manual, Table surface (swivel table): 900 x 500 mm Max. workpiece weight: 190 kg Travel in X-axis: 600 mm Travel in Y-axis: 450 mm Travel in Z-axis: 380 mm Quill travel in Z1: 120 mm Spindle speed range: 40 - 2000 rpm Number of gear stages: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1560 kg including extensive standard accessories, including: Work area enclosure 3-axis digital display CONTUR Hydraulic tool holder for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, including hydraulic unit Monitored spindle guard 3 conventional handwheels Fpjdohu Rwfopfx Ag Iel Complete electrical equipment for three-phase power 400 V, 50 Hz Ball screws for X, Y, and Z axes Vertical milling head Fixed swivel table, 900 x 500 mm clamping surface Swiveling device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guide rails Automatic central lubrication for the axes and ball screws Coolant system with pump Set (4 pieces) of support elements Including tool holder package consisting of: 1 x collet chuck ER40 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Condition: new, x-travel 300 mm Fedpfx Agsfrzuno Iopl y-travel 200 mm z-travel 350 mm table-size 700 x 200 mm spindle taper ISO 40 turning speed range - horizontal 150 - 1660 U/min turning speed range - vertical 110 - 1230 U/min quill stroke 120 mm spindle drive 3,0 kW weight of the machine ca. 1,15 t dimensions of the machine ca. 1,31 x 1,38 x 1,65 m

Condition: new, Available from stock! Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic bandsaw with dual-sided mitre adjustment from 90° to 30°, stepless via scale with 0.5° accuracy. Includes the optional micro-spraying system! Hydraulic lifting/lowering of the saw frame Semi-automatic sawing cycle Hydraulic material clamping / short-stroke cylinder Rapid downfeed to material top edge 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 Fodpfx Agowcwggs Ispl 30° right Ø 130 or 120x120 Remnant length 25 mm

Year of construction: 1969, condition: used, machine/vehicle number: 304, Manufacturer: Hermle Model: FW 800 Machine No.: 304 Year of Manufacture: 1969 Weight: approx. 1000 kg General / Technical Data: Well-maintained, used horizontal milling machine with hydraulic program control (cam control strip) for automatic production processes. Arbor: SK 30 Travel distances: X 400mm Y 370mm Z 165mm Spindle speeds: 18 speeds, mechanically switched in 2 motor stages 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 rpm Feeds: in the X and Y axes, stepless hydraulic; in Z (horizontal milling spindle) manual Table dimensions (fixed table): 800mm x 220mm Power supply / spindle motor power: 380V 50 Hz / 1.5 kW Approx. machine footprint: 1900mm x 1100mm x 1700mm (l x w x h) Accessories / Special equipment: - Fixed milling table - Assorted tool holders Fodpfx Agedgrwdj Ijpl - Chip tray - Coolant system - Machine documentation with programming instructions Remarks The machine is in very good condition for its age. The machine is designed primarily for production use in small and medium series. The machine has a simple, cam-switch-controlled hydraulic program control.

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the Fsdpfx Aot Tqkdsg Iepl machine we supply a loading/unloading table.

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 330 mm 400 x 310 saw band length 3820 x 34 x 1,1 mm band speed 22 - 88 m/min table height 930 mm total power requirement 2,2 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Fedpfx Agewinyks Ijpl

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Fpedpfjhikzlox Ag Ijl -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Condition: new, pressure: 175bending length: 3020column width: 2550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 3700x2230x3025weight approx.: 12.0504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22Standard Equipment: KKI EUROPA XL CNC Press Brake by KK-IndustriesKK-Industries proudly serves as the official representative of the DENER Group, offering a high-quality model tailored for the European market. The KKI EUROPA XL CNC Press BrakeThe KKI EUROPA XL, manufactured by DENER, is a robust and highly precise press brake designed for universal applications. With its superior installation height and extended stroke, the EUROPA XL is built to meet the demands of a wide variety of tasks. Its large projection minimizes limitations, ensuring a versatile and efficient operation. Quality and PrecisionAt KK-Industries, we prioritize quality, and this is evident in the exceptional features of the EUROPA XL. The press brake comes equipped with the DELEM DA 66 T control system as standard, offering intuitive operation and advanced functionality. The EUROPA XL features CNC axes (Y1, Y2, X, and R) as standard, enabling precision control over every aspect of the bending process. The CNC crowning system, integrated into the DELEM DA 66 T, ensures optimal alignment and consistent results across all bends. Top-Quality ToolsIn addition to the advanced control system, we ensure that the KKI EUROPA XL is equipped with the finest tools available. The upper tool and die are sourced from EUROSTAMP in Italy, guaranteeing outstanding quality and durability for every application. Service ExcellenceAt KK-Industries, we understand that a machine is only as good as the service it receives. That’s why we prioritize highly qualified personnel with extensive experience in CNC sheet metal working. Our team ensures that your KKI EUROPA XL operates at peak performance and receives the support it needs to excel. Fedpfsfrvw Iox Ag Iopl

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Fsdpfx Aozac Sbsg Ijpl