Mechanical pressing pliers

Klauke K05 6 - 50 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm Todpfx Ahsxlip Ajuof • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110°

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m Tedou Nc Emspfx Ahuef 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *

Condition: used, Year of construction: 2014, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Tjdpfxjvx Uvfe Ahuof Wheelhead variant 12 (two grinding spindles can be moved separately).

Condition: excellent (used), Year of construction: 2013, 1. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100-1000 kW - Year of manufacture: 2013 - Design: ZM 2. WEISHAUPT WM-G10/3-A (with gas train), gas burner Tedpjwgyp Eofx Ahusf - Output: 125-900 kW - Year of manufacture: 2011 - Design: ZM-LN

Condition: good (used), Year of construction: 1998, functionality: fully functional, MAKA ECM 27 R Year of manufacture: 1998 - High-performance CNC milling center for 5-axis machining, ideal for machining aluminum and for mold making. - MAKA ECM 27 R in portal design. - Equipped with automatic central lubrication and control cabinet with air conditioning unit. - CNC control BWO 900C, memory 1 MB, in integrated PC. - Portable control panel BWO RC 910. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm Tedpfst Dl U Ejx Ahuof X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 40 m/min. Z-axis: 15 m/min. A/B axis: 10,000 °/min. 1 milling spindle 11 kW, Speed infinitely variable from 2,000 - 17,000 rpm, With ceramic bearings, liquid cooling. SK 40 tool holder with tool changing device. 1 chain tool magazine for 12 tools up to Ø 160 mm, including 2 for holding an angle drill head (fixed position coded), SK 40. 1 steel surface table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m²/h, with 250 liter tank. 1 piece vacuum clamping circuit. Work safety: With safety cabin for the rear of the machine, side access door, the cabin is open at the top. Slatted curtain on the operator side and safety bumper on the front of the table. Repairs / renewal before delivery: - Maintenance. Connected loads: Voltage: 400 V (max. +/- 5%), frequency: 50 Hz Rated power: 22.5 kW The use of an RCD in the machine supply line is not possible. Operating temperature: 10 - 35° C Pneumatics: 6 bar, approx. 10 m³/h Tool holders and processing tools are not included in the scope of delivery. Used machine, without any guarantee or warranty. Optional: incl. installation and commissioning with production-ready handover!

Condition: used, Year of construction: 1997, functionality: not functional, The following parts from a Chiron FZ 12 SM, year 1997, are for sale: 9 pcs. tool arms 1 pc. spindle 1 pc. spindle motor Tsdpfx Ahjxdhp Ejuef

Condition: new, Year of construction: 2025, Vice is made of high-quality cast iron. Due to its precise guiding, this vice is used in industries where precision is key. Swivel base allows for 360o adjustment in the horizontal plane, and 90o adjustment in the vertical plane. Jaw inserts made of tool steel, hardened (55+- 3HRC) and precisely ground. Tsdpfx Ajvxgh Tshuef Vice features Cast iron rotary QHK machine vice, useful while working with grinding, milling, drilling and planing machines, etc. Made of high-quality cast iron Equipped with swivel base with 360o pitch, 1o gradation Body, along with the moving jaw, is made of high-quality cast iron Top side of the lead screw secured from dirt and chips Possible disassembly of the swivel base While replacing inserts it is advised to machine their surfaces attached to the vice in order to achieve the accuracy parameters specified in the technical documentation

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Included in delivery: 01x pallet rack beam, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Beam type: SLO 089|2 Tsdpfx Ahewuf E Ijuef Connector: 5 HK Clear span: 1,140 mm 02x safety pins, used Finish: sendzimir galvanised For securing the longitudinal beams Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is available for collection only. Further transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location and scope.

Condition: defective spare-parts repository (used), Year of construction: 1995,  Machine with breakdown (unknown) proposed for spare parts. Tedpfowzifxsx Ahuof

Condition: good (used), Technical data for pallet rack beam: Racking system: Bito Type: PL 38 Scope of delivery includes: 01x pallet rack beam, used Material color: blue Box profile: 127 x 50 mm Beam type: PT36.127LN Connector: 3 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 2,300 kg, with evenly distributed load 02x safety pins, used Version: fully galvanized For securing the beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Todpfxsw Dc U Ee Ahujf This item is offered for collection only. Any transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.