3 rolls asymmetrical bending

KK-Industries CY 90-15/2.5 with motor

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg Nsdpfjgvkk Njx Aa Eelk table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one Nlodpfx Asfg E Hpoa Eok The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: ready for operation (used), Migatronic MTE 440 TIG AC / DC welder for steel and alumminium. Water cooling Migatronic CTU 3000. The maximum welding strength is 440 A. Tested by EWM service. You are welcome to visit for inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. If you have any questions you can contact us by phone. Company names and trademarks are the property of their owners and serve only to identify and describe the products. Deviations from technical data and errors in the description of the article can happen and remain reserved. Nsdpfxoh Ib Idj Aa Eolk Shipping is exclusively to traders - for private consumers only a pickup is possible.

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G Nlsdsg Eglpspfx Aa Eok 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm longitudinal adjustment: 130 mm cross adjustment: 80 mm Nljdpfx Ajfqicxja Esk height adjustment: 65 mm rake angle: +25° to -10 Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg

Condition: good (used), We sell a used robot grinding machine. The plant is in good used condition. Included in the plant are: - 1x KUKA KR30-3 industrial robot Nljdpfxsh T Dure Aa Eok - 3x belt grinders - 1x loading table If you have any questions, please do not hesitate to contact us!

Condition: used, mileage: 247,575 km, power: 77 kW (104.69 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 2,248 kg, maximum load weight: 551 kg, overall weight: 2,799 kg, next inspection (TÜV): 01/2025, fuel: diesel, CO₂ emissions: 172 g/km, fuel consumption (urban): 7.3 l/100km, fuel consumption (extra-urban): 6.1 l/100km, fuel consumption (combined): 6.5 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 5,120 mm, Year of construction: 2016, construction height: 1,980 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, trailer coupling, AdBlue system malfunction. The Ford Transit Custom 290 2.0 TDCi is a reliable used car, ideal for business people. It was first registered in November 2016 and has a mileage of 247,575 km. With a powerful 2.0-liter diesel engine and an output of 77 kW (105 hp), it offers efficient performance and meets the Euro 5 emissions standard. The vehicle is equipped with a manual transmission and has an average consumption of 6.5 l/100 km. Nedpfx Aetyz D Nea Eolk The panel van model is characterized by practical equipment features, including air conditioning, cruise control, trailer hitch (AHK) and workshop fittings. Driver and passenger airbags as well as modern assistance systems such as the hill start assist ensure safety. Additional features such as an on-board computer, parking pilot system front and rear, and adjustable steering column increase driving comfort. The rear wing doors with a 180 degree opening angle and a sliding door allow for flexible loading options. The vehicle is in good condition, but the AdBlue system has a fault. The loading volume is optimized by a high partition. Other highlights include the medium-high roof variant, tinted glazing and an extensive interior filter. The dimensions are 5,120 mm in length, 2,032 mm in width and 1,982 mm in height. With a green environmental sticker, the Transit can be used in many environmental zones. Special equipment: Airbag on passenger side, vehicle without vinyl floor covering in the loading/passenger compartment, rear wing doors with glazing (opening angle 180 degrees), tailgate without glazing, high loading compartment partition behind driver and passenger, with window and through-loading option below, parking pilot system front and rear, visibility package 1 Other equipment: Airbag on driver side, traction control (ASR), basic, indicator light integrated in exterior mirror, on-board computer, electric brake force distribution (EBD), driver assistance system: hill start assist, interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, steering column (steering wheel) adjustable in height/length, truck registration, engine 2.0 liter - 77 kW TDCi KAT, radio preparation, 4 speakers, wheelbase 2933 mm, spare wheel in driving tires, low emissions according to Euro 6 emission standard, headlights H4, sliding door in the loading/passenger compartment on the right, mud flaps at the front and rear, side protection strips, bumpers partially painted, tinted glazing, paneling in the loading/FG compartment: half-high, lashing rails on the side of the loading compartment Equipment was determined using a VIN query, errors can occur here for technical reasons COC is available Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast, easy clamping of workpieces - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop Njdpfx Aod R Sipoa Eelk - Pressure gauge (band tension) - Carbide saw blade guides - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: new, messurements (LxWxH): 1.630 x 700 x 1.200weight approx.: 480total power requirements: 1,1prebending: 2sheet thickness: 3sheet length: 1050 Nsdsd Eqqqjpfx Aa Eslk

Condition: new, Year of construction: 2025, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. Nodpfx Aasn Ut Ile Eolk The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded.